John Deere Waratah CF1, CF5, CF7, CF7S, CF8 Boom Operator Instruction F724870WA

John Deere Waratah CF1, CF5, CF7, CF7S, CF8 Boom Operator Instruction F724870WA - Image 2

John Deere Waratah CF1 CF5 CF7 CF7S CF8 Boom Operator Manual F724870WA 1

John Deere Waratah CF1, CF5, CF7, CF7S, CF8 Boom Operator Instruction F724870WA

Type Of Manual: Operator Instruction
Manual ID: F724870WA
Format: PDF
Size: 16.2MB
Number of Pages: 112

Category: John Deere Operators Manuals PDF Tag: Agricultural

Description

Model List:
- Waratah CF1 Boom
- Waratah CF5 Boom
- Waratah CF7 Boom
- Waratah CF7S Boom
- Waratah CF8 Boom

1. Table of Contents
2. Foreword
2.1. Copyright
2.2. Foreword
2.3. Declaration of Incorporation
2.4. Product identification
2.5. Base machine requirements
3. Safety
3.1. Follow Laws and Regulations
3.1.1. Recognize Safety Information
3.1.2. Understand Signal Words
3.1.3. Prepare for Emergencies
3.1.4. Wear Protective Clothing
3.1.5. Handle Chemical Products Safely
3.2. Operating
3.2.1. Attach Do not Operate Tag
3.2.2. Avoid Crush Points
3.2.3. Pay Attention to Bystanders
3.2.4. Inspect boom
3.2.5. Avoid Power Lines
3.2.6. Keep Danger Zone Clear
3.2.7. Operate the Boom Safely
3.3. Maintenance
3.3.1. Keep Machine in Good Condition
3.3.2. Use Proper Clothing
3.3.3. Use Proper Tools
3.3.4. Support Machine Properly
3.3.5. Avoid High Pressure Fluids
3.3.6. Make Welding Repairs Safely
3.3.7. Avoid Heating near Pressurized Fluid Lines
3.3.8. Dispose of Waste Properly
3.4. Safety Decals
4. Warranty
4.1. Standard Warranty
5. Specification
5.1. Boom
5.1.1. General
5.1.2. CF1 reach and lifting diagrams
5.1.3. CF5 reach and lifting diagrams
5.1.4. CF5XI reach and lifting diagrams
5.1.5. CF5XE reach and lifting diagrams
5.1.6. CF7 reach and lifting diagrams
5.1.7. CF7S reach and lifting diagrams
5.1.8. CF7XI and CF7SXI reach and lifting diagrams
5.1.9. CF7XE and CF7SXE reach and lifting diagrams
5.1.10. CF8 reach and lifting diagrams
5.2. Components
5.2.1. Cylinders
5.2.2. Pins and Bearings
5.2.3. Boom Pillar
5.2.4. Main Boom
5.2.5. Jib Boom
5.2.6. Hidden hoses boom
5.2.7. Double Extension Boom
5.2.8. Internal hosing (XI) extension boom
5.2.8.1. Improvements on XI extension
5.2.8.2. Chain mechanism and hosing
5.2.8.3. Internal hosing in action
5.2.9. External hosing (XE) extension boom
5.2.9.1. Improvements on XE extension
5.2.10. Ylink for XI and XE booms
5.3. Central greasing (optional equipment)
5.3.1. Grease dispenser
5.3.2. Dispenser on boom pillar
5.3.3. Dispenser on jib boom
5.4. Boom Brochure
6. Installation
6.1. General installation requirements
6.2. Requirements for the hydraulic installation
6.3. Boom Installation Instructions
6.4. Hydraulic schematics
6.5. Electric schematics
6.7. CF5, CF7, CF7S
7. Operating Instructions
7.1. Operating Instructions
8. Maintenance
8.1. Maintenance Introduction
8.2. Welding instructions
8.3. Fluids and lubricants
8.4. GUK fastening torques
8.5. Checking pin joints bearing tolerances
8.6. Boom general servicing
8.7. Periodical Maintenance
8.7.1. First Service After 250 Hours
8.7.2. As required
8.7.2.1. Adjust tension of double extension boom chains
8.7.2.2. Adjust the extract and retract chains of the XI extension
8.7.2.3. Check the internal hosing of XI extension
8.7.2.4. Installing Ylink hoses
8.7.2.5. Adjust rotator link brakes
8.7.3. Every 10 hours or daily
8.7.3.1. Check boom structures visually
8.7.4. Every 50 hours or weekly
8.7.4.1. Check boom screw joints
8.7.4.2. Check joint pins of the boom
8.7.4.3. Check the grapple and rotator
8.7.4.4. Grease the boom
8.7.4.5. Grease the boom 1/2
8.7.4.6. Grease the boom (single extension) 2/2
8.7.4.7. Grease the boom (double extension) 2/2
8.7.4.8. Grease the XE boom (single extension) 2/2
8.7.4.9. Grease the XI boom (double extension) 2/2
8.7.4.10. Grease the jib boom equipped with XI extension
8.7.4.11. Grease link and grapple
8.7.5. Every 250 hours
8.7.5.1. Check the internal hosing of XI extension
8.7.5.2. Tighten two rotator clamping screws (Indexator)
8.7.6. Every 500 hours
8.7.6.1. Check sideways clearance of the extension booms
8.7.6.2. Check vertical clearance of the extension booms
8.7.6.3. Check clearances of XI/XE extension
8.7.7. Every 1000 hours
8.7.7.1. Check chain guide of double extension boom
8.7.7.2. Clean rotator magnetic plug
8.7.7.3. Tighten rotator screws
9. Schematics
9.1. Hydraulic schematics
9.2. Electric schematics
10. Transporting, towing and storing
10.1. Transporting the Boom
10.2. Preparing the boom for storage
11. Feedback
12. Attachments
12.1. Declaration of Incorporation template_boom_en
12.2. Crane_Brochure_EN_20210414_forw
12.3. Boom_installation_report
12.4. CF1_HS_en
12.5. CF5CF7_HS_en
12.6. CF8_HS_en
12.7. Forw_boom_ES_en

John Deere Waratah CF1, CF5, CF7, CF7S, CF8 Boom Operator Instruction F724870WA

Description

Related products

Login