John Deere Waratah HTH624C 4×4 Harvester Head Operator Manual WA130395

Description

• Model List:
  • Waratah HTH624C 4×4 Harvester Head

• 1. Contents
• 1.1. General
• 1.1.1. Copyright
• 1.1.2. General Information
• 1.1.3. Manual Replacement
• 1.1.4. Warranty
• 1.1.5. Avoid Unauthorised Machine Modifications
• 1.1.6. Features
• 1.2. Safety Operator Safety Precautions
• 1.2.1. Only Operate If Qualified
• 1.2.2. Lock Tilt Bracket
• 1.2.3. Recommended Harvester Head Positions for Top saw chain and Top saw bar Maintenance
• 1.2.4. Recommended Harvester Head Positions for Main saw chain and Main saw bar Maintenance
• 1.3. Safety General Precautions
• 1.3.1. Operator Risk
• 1.3.2. General Safety
• 1.3.3. Wear Protective Equipment
• 1.3.4. General Safety Precautions
• 1.3.5. Operational Safety
• 1.3.6. Recognise Safety Information
• 1.3.7. Operating Precautions
• 1.3.8. Keep Clear of Saw
• 1.3.9. Avoid Chain Shot
• 1.3.10. Beware of Chain shot
• 1.3.11. Chain Shot Guard Inspection
• 1.3.12. Never Operate Without Reading Manual
• 1.3.13. Never Stand on the Harvester Head
• 1.3.14. Stem Eject Feature
• 1.3.15. Slottedlink (Optional Feature)
• 1.4. Safety Operation Precautions
• 1.4.1. Read Manuals Before Operating
• 1.4.2. Keep Personnel Off the Harvester Head
• 1.4.3. Pinch Area
• 1.4.4. Do Not Stare into the Laser Beam
• 1.4.5. Laser Findend Safety
• 1.4.6. Waratah Key Switch Control (Threeposition)
• 1.4.7. Waratah Switch Control (Twoposition)
• 1.4.8. Lockable battery disconnect switch
• 1.4.9. To activate manual mode
• 1.4.10. H16 Controller Power
• 1.4.11. Avoid Work Site Hazards
• 1.4.12. Avoid Highpressure Oils
• 1.4.13. Avoid Highpressure Fluids
• 1.4.14. Dispose of Waste Properly
• 1.5. Safety Maintenance Precautions
• 1.5.1. Prepare for Service Safety
• 1.5.2. General Safety
• 1.5.3. Remove Paint before Welding or Heating
• 1.5.4. Make Welding Repairs Safely
• 1.5.5. Service Accumulator Systems Safely
• 1.6. Safety Safety Signs and Labels
• 1.6.1. Head Label Positions
• 1.6.2. Head Labels Positions for Loader Processor
• 1.6.3. Cab labels (twoposition Waratah switch)
• 1.7. Safety General Carrier Precautions
• 1.7.1. Recommendations For Processing on the Landing
• 1.7.2. Recommendations for Tree Felling
• 1.7.3. Use and Maintain a Safetybelt
• 1.7.4. Do Not Operate Unless Seated
• 1.7.5. Welding
• 1.7.6. Carrier Class Head Type
• 1.7.7. Inspect the Harvester Head
• 1.7.8. Key Ring Caution and ID
• 1.7.9. Operator Protective Structures
• 1.7.10. Driving
• 1.7.11. Processing
• 1.7.12. Bucking and Piling
• 1.8. Operation General Operation
• 1.8.1. General Operation
• 1.8.2. Planning Area Preparation
• 1.9. Operation Clearcut Harvesting
• 1.9.1. Felling
• 1.9.2. Felling Process
• 1.9.3. Delimbing
• 1.9.4. Fall and Delimb
• 1.10. Operation Thinning Techniques
• 1.10.1. Plantation Out Row CuttoLength at Stump
• 1.10.2. Plantation Out Row Full Treethinning
• 1.10.3. Select Thinning
• 1.11. Operation Processing
• 1.11.1. General
• 1.11.2. Debarking
• 1.11.3. Measuring
• 1.11.4. Single Stem
• 1.11.5. Multitree Processing (MTP)
• 1.11.6. Stem Shuffle Mode (SSM)
• 1.12. Operation Cutting
• 1.12.1. General
• 1.12.2. Using the Main saw Unit
• 1.12.3. Using the Top saw Unit
• 1.13. Operation Special Techniques
• 1.13.1. Use of Double Cuts
• 1.13.2. Quarter Cutting
• 1.13.3. Falling Multileaders
• 1.13.4. Felling on Hillsides
• 1.13.5. Using Loading Processor
• 1.14. Operation Miscellaneous
• 1.14.1. Unattended Harvester Head
• 1.14.2. Delimbing Multileaders
• 1.15. Maintenance Fluids and Lubricants
• 1.15.1. Recommended Hydraulic System Fluid
• 1.15.2. Chain Oil
• 1.15.3. Grease Point Location Remote Grease Point Location
• 1.15.4. Grease Point Location Link, Rotator, Tilt Cylinder
• 1.15.5. Grease Point LocationTilt Frame for Loader Processor (Option)
• 1.15.6. Grease Point Location Topsaw Unit
• 1.15.7. Grease Point Location Upper Delimb Arms
• 1.15.8. Grease Point Location Lengthmeasuring Unit
• 1.15.9. Grease Point Location Feed Arms
• 1.15.10. Grease Point Location Lower Delimb Arm
• 1.15.11. Grease Point Location Mainsaw Unit (3/4 Saw)
• 1.16. Maintenance Schedule
• 1.16.1. Periodic Maintenance Record
• 1.16.2. Maintenance Every 8 Hours or Daily
• 1.16.3. Maintenance Every 50 Hours or Weekly
• 1.16.4. Maintenance Every 200250 Hours or Monthly
• 1.16.5. Maintenance Every 1,000 Hours
• 1.16.6. Maintenance Every 2000 Hours or Annually
• 1.17. Maintenance General
• 1.17.1. Unified Inch Bolt and Cap Screw Torque Values
• 1.17.2. Metric Bolt and Cap Screw Torque Values
• 1.17.3. Additional Metric Cap Screw Torque Values
• 1.18. Maintenance Operational Checkouts
• 1.18.1. FaultFinding
• 1.19. Miscellaneous Carrier
• 1.19.1. Prevent Fires
• 1.19.2. In Case of Carrier Fire
• 1.19.3. Welding on the carrier or harvester head
• 1.19.4. Welding on Carrier or Harvester Head TimberRite
• 1.19.5. Using booster batteries
• 1.19.6. Using Booster Batteries TimberRite
• 1.20. Miscellaneous Measurements
• 1.20.1. Metric and Imperial Unit Expressions
• 1.21. Miscellaneous Specification Conversion
• 1.21.1. Pressure
• 1.21.2. Miscellaneous
• 1.22. Miscellaneous Wood Measurement
• 1.22.1. Wood Measurement Equivalents