Case Farmall 110A, 120A, 130A, 140A Tier 4B (Final) Tractor Operator Manual 51490496 PDF

Description

• Model List:
  • Farmall 110A Tier 4B (Final) Tractor
  • Farmall 120A Tier 4B (Final) Tractor
  • Farmall 130A Tier 4B (Final) Tractor
  • Farmall 140A Tier 4B (Final) Tractor

• 1. GENERAL INFORMATION
• 1.1. Note to the owner
• 1.2. Intended use
• 1.3. ElectroMagnetic Compatibility (EMC)
• 1.4. Product identification
• 1.5. Product Identification Number (PIN)
• 1.6. Operators manual storage on the machine
• 1.7. Machine orientation
• 1.8. Machine components
• 1.9. Selective Catalytic Reduction (SCR) exhaust treatment Product overview
• 2. SAFETY INFORMATION
• 2.1. Safety rules and signal word definitions
• 2.2. Safety rules
• 2.3. Ecology and the environment
• 2.4. Safety signs
• 2.5. Informational decals
• 3. CONTROLS AND INSTRUMENTS
• 3.1. Access to operators platform
• 3.1.1. Proper entry and exit
• 3.2. Operators seat
• 3.2.1. Mechanical operators seat
• 3.2.2. Pneumatic operators seat
• 3.2.3. Seat belt operation
• 3.3. Instructional seat
• 3.3.1. Overview
• 3.4. Forward controls
• 3.4.1. Front console
• 3.4.2. Foot pedals
• 3.4.3. Selective Catalytic Reduction (SCR) exhaust treatment Overview
• 3.5. Lefthand side controls
• 3.5.1. Power TakeOff (PTO) (without cab)
• 3.5.2. Parking brake
• 3.5.3. Door and window operation
• 3.5.4. Storage
• 3.6. Righthand side controls
• 3.6.1. Transmission controls
• 3.6.2. Hi / Lo Transmission
• 3.6.3. Power TakeOff (PTO) (with cab)
• 3.6.4. Hydraulic controls
• 3.6.5. Righthand post
• 3.6.6. Heating, Ventilation, and Air Conditioning (HVAC) controls
• 3.6.7. Door and window operation
• 3.7. Rearward controls
• 3.7.1. Rear window operation
• 3.7.2. Rear window wiper
• 3.8. Overhead controls
• 3.8.1. Radio
• 3.8.2. Radio operation
• 3.8.3. Dome light
• 3.8.4. Roof hatch
• 3.9. Display
• 3.9.1. Setup menu
• 3.9.2. Backlighting and dimming
• 3.9.3. Analog/Digital Instrument Cluster (ADIC)
• 3.9.4. Warning and status indicators
• 3.9.5. Display overview
• 3.9.6. Alarms
• 3.9.7. Overview
• 3.9.8. Maintenance intervals
• 3.9.9. Audible alarm buzzer
• 3.9.10. Fuel consumption units
• 3.9.11. Active error codes and warnings
• 3.9.12. Lamps and gauges
• 3.9.13. Display
• 4. OPERATING INSTRUCTIONS
• 4.1. Commissioning the unit
• 4.1.1. Runin period of a new machine
• 4.1.2. Roll Over Protective Structure (ROPS)
• 4.2. Starting the unit
• 4.2.1. Starting the engine
• 4.2.2. Engine starting aids
• 4.3. Stopping the unit
• 4.3.1. Stopping the tractor
• 4.3.2. Hydraulic trailer brakes
• 4.4. Moving the unit
• 4.4.1. General transmission operation
• 4.4.2. Steering control
• 5. TRANSPORT OPERATIONS
• 5.1. Road transport
• 5.1.1. Basic instructions
• 5.1.2. High visibility position markers
• 5.2. Recovery transport
• 5.2.1. Towing the tractor
• 6. WORKING OPERATIONS
• 6.1. Tires and wheels
• 6.1.1. Tire load and inflation charts
• 6.1.2. Tractor ballasting
• 6.1.3. Liquid ballast
• 6.1.4. Front wheel tread settings
• 6.1.5. Rear wheel tread settings
• 6.1.6. Bar axle adjustment
• 6.1.7. Dual rear wheels
• 6.2. Driveline
• 6.2.1. Creeper gears
• 6.2.2. FourWheel Drive (4WD)
• 6.2.3. Differential lock
• 6.2.4. Front axle oscillation
• 6.3. Hydraulic system
• 6.3.1. Bosch remote valves
• 6.3.2. Sohipren remote valves
• 6.3.3. Hydraulic Power Lift (HPL)
• 6.3.4. Hydraulic remote control valves
• 6.3.5. Connecting remote cylinders
• 6.3.6. Bleeding remote cylinders
• 6.3.7. Operating singleacting hydraulic cylinders
• 6.3.8. Operating doubleacting hydraulic cylinders
• 6.3.9. Operating continuous flow hydraulic equipment
• 6.3.10. Hydraulic remote control valves
• 6.3.11. Connecting remote cylinders
• 6.3.12. Operating singleacting hydraulic cylinders
• 6.3.13. Operating doubleacting hydraulic cylinders
• 6.4. Implements
• 6.4.1. Adjusting the drawbar
• 6.4.2. Hitch operation
• 6.4.3. Power TakeOff (PTO) operation
• 7. MAINTENANCE
• 7.1. General information
• 7.1.1. Safety rules Machine service access
• 7.1.2. Warranty notice
• 7.1.3. Jacking points
• 7.1.4. Opening the hood
• 7.1.5. Fueling the machine
• 7.1.6. Selective Catalytic Reduction (SCR) exhaust treatment Basic instructions
• 7.1.7. General specification Biodiesel fuels
• 7.1.8. General specification Diesel fuel
• 7.1.9. Torque Minimum tightening torques for normal assembly
• 7.1.10. Standard torque data for hydraulics
• 7.1.11. Organic Acid Technology (OAT) coolant
• 7.1.12. Fluid capacities and lubricants
• 7.1.13. Engine oil Recommended engine oil for operating temperature ranges
• 7.2. Maintenance planning
• 7.2.1. Maintenance chart
• 7.3. Warning light on
• 7.3.1. Engine air filter (outer element) Clean
• 7.3.2. Fuel filter water separator Drain fluid
• 7.3.3. Brake fluid Level make up
• 7.4. Every 10 hours or daily
• 7.4.1. Engine oil Level make up
• 7.4.2. Radiator, oil cooler, and condenser Clean
• 7.4.3. Engine cooling system Level make up
• 7.5. Every 50 hours
• 7.5.1. Tire pressure Check
• 7.5.2. Transmission, rear axle, and hydraulic system oil Level make up
• 7.5.3. Brake fluid Level make up
• 7.5.4. Windshield washer fluid Level make up
• 7.5.5. Fuel filter water separator Drain fluid
• 7.5.6. Cab recirculation air filter Clean
• 7.5.7. Cab air filter Clean
• 7.5.8. Wheel hardware Check
• 7.5.9. Grease points Grease
• 7.5.10. Clutch pedal Adjust
• 7.6. Every 300 hours
• 7.6.1. FourWheel Drive (4WD) front axle differential oil Level make up
• 7.6.2. FourWheel Drive (4WD) front axle hub oil Level make up
• 7.6.3. Transmission and hydraulic oil filter Replace
• 7.6.4. Cab and safety frame mounting hardware torque Check
• 7.6.5. Parking brake Adjust
• 7.6.6. Brake pedal Adjust
• 7.6.7. Alternator drive belt Check
• 7.6.8. Air conditioning compressor belt Check
• 7.6.9. Battery cables Check
• 7.7. Every 600 hours
• 7.7.1. Diesel Exhaust Fluid (DEF)/AdBlue supply module prefilter Clean
• 7.7.2. Engine oil Change fluid
• 7.7.3. Engine air filter (outer element) Replace
• 7.7.4. Fuel filter water separator Replace
• 7.8. Every 1200 hours or annually
• 7.8.1. Diesel Exhaust Fluid (DEF)/AdBlue supply module prefilter Replace
• 7.8.2. Transmission, rear axle, and hydraulic system oil Change fluid
• 7.8.3. FourWheel Drive (4WD) front axle differential oil Change fluid
• 7.8.4. FourWheel Drive (4WD) front axle hub oil Change fluid
• 7.9. Every 3600 hours or two years
• 7.9.1. Diesel Exhaust Fluid (DEF)/AdBlue supply module main filter Replace
• 7.10. Every 4000 hours or four years
• 7.10.1. Engine coolant Change fluid
• 7.11. As required
• 7.11.1. Diesel Exhaust Fluid (DEF)/AdBlue supply module inlet filter Replace
• 7.11.2. Diesel Exhaust Fluid (DEF)/AdBlue tank inlet filter Replace
• 7.11.3. Diesel Exhaust Fluid (DEF)/AdBlue supply module backflow filter Replace
• 7.11.4. Headlights Adjust
• 7.11.5. Headlight bulb Replace
• 7.11.6. Work light bulb Replace
• 7.11.7. Rear light bulb Replace
• 7.11.8. Steering stops Adjust
• 7.11.9. Steering toein Adjust
• 7.11.10. Roof hatch Cleaning
• 7.11.11. Parking brake Adjust
• 7.12. Fuse and relay locations
• 7.12.1. Chassis fuse box
• 7.12.2. Engine fuse box
• 7.12.3. Other fuses and relays
• 7.13. Storage
• 7.13.1. Preparing for storage
• 7.13.2. Removing from storage
• 8. TROUBLESHOOTING
• 8.1. Symptom(s)
• 8.1.1. Engine
• 8.1.2. Transmission
• 8.1.3. Electrical system
• 8.1.4. Hydraulic system
• 8.1.5. Hydraulic remote control valves
• 8.1.6. Threepoint hitch
• 8.1.7. Brakes
• 9. SPECIFICATIONS
• 9.1. Length and height
• 9.2. Width
• 9.3. Ground clearance
• 9.4. Maximum side slope operation
• 9.5. Power TakeOff (PTO)
• 9.6. Hydraulic system
• 9.7. Threepoint linkage
• 9.8. Brake system
• 9.9. Steering system
• 9.10. Electrical system
• 9.11. Lubrication system Capacities
• 10. ACCESSORIES
• 10.1. Engine
• 10.2. Chassis
• 10.4. Roll Over Protective Structure (ROPS)
• 10.5. Safety
• 10.6. Hydraulics
• 10.7. Hitch
• 11. FORMS AND DECLARATIONS
• 11.1. Delivery report Owner copy
• 11.2. Delivery report Dealer copy