Description
-
Model List:
- Farmall 80JXM Tractor
- Farmall 90JXM Tractor
- 1. GENERAL INFORMATION
- 1.1. Note to the owner
- 1.2. Product identification
- 2. SAFETY INFORMATION
- 2.1. Safety rules
- 2.2. Ecology and the environment
- 2.3. General and Safety Decals
- 2.4. Trailer hitching
- 3. CONTROLS AND INSTRUMENTS
- 3.1. Access to operators platform
- 3.1.1. Before operating
- 3.2. Operators seat
- 3.2.1. Operators seat
- 3.2.2. Seat belt (If equipped)
- 3.3. Forward controls
- 3.3.1. Instrument cluster
- 3.3.2. Hand controls and switches
- 3.3.3. Clutch pedal
- 3.3.4. Brake pedals
- 3.3.5. Transmission shuttle shift lever
- 3.3.6. Foot throttle pedal
- 3.3.7. Steering wheel tilt adjustment
- 3.4. Lefthand side controls
- 3.4.1. Transmission range lever
- 3.4.2. FourWheel Drive (4WD)
- 3.4.3. PTO Lever
- 3.4.4. Parking brake
- 3.4.5. Creeper lever (If equipped)
- 3.4.6. Splitter lever (If equipped)
- 3.5. Righthand side controls
- 3.5.1. Differential lock
- 3.5.2. Transmission main shift lever
- 4. OPERATING INSTRUCTIONS
- 4.1. Starting the unit
- 4.1.1. Starting the engine
- 4.2. Stopping the unit
- 4.2.1. Stopping the engine
- 4.3. Moving the unit
- 4.3.1. Roll over protective structure (ROPS)
- 5. TRANSPORT OPERATIONS
- 5.1. Road transport
- 5.1.1. Towing attachments
- 5.2. Recovery transport
- 5.2.1. Towing the tractor
- 6. WORKING OPERATIONS
- 6.1. General information
- 6.1.1. Field operation
- 6.2. Power TakeOff (PTO)
- 6.2.1. Power TakeOff (PTO) Grouped Safety Message
- 6.2.2. Attaching PowerTake Off (PTO) driven equipment
- 6.2.3. Power TakeOff (PTO)
- 6.3. Intercooler and turbocharger
- 6.3.1. Turbocharger
- 6.3.2. Aftercooler
- 6.3.3. Oil cooler
- 6.4. Threepoint linkage
- 6.4.1. Threepoint linkage
- 6.4.2. Attaching threepoint equipment
- 6.4.3. Detaching threepoint equipment
- 6.4.4. Lift rods, lower links and top link
- 6.5. Hydraulic system
- 6.5.1. Hydraulic system
- 6.5.2. Remote valves (If equipped)
- 6.6. Wheel track adjustment
- 6.6.1. Wheel tread settings
- 6.7. Ballasting and tires
- 6.7.1. Ballasting and tires
- 7. MAINTENANCE
- 7.1. General information
- 7.1.1. Lubrication and maintenance general information
- 7.1.2. Refueling the tractor
- 7.1.3. Fuel saving tips for optimum performance
- 7.1.4. Guards and access panels
- 7.1.5. Lubricants and coolants
- 7.1.6. Protecting the electrical/electronic systems during charging or welding
- 7.1.7. General battery maintenance
- 7.1.8. Maintenance chart
- 7.2. First 50 hours
- 7.2.1. Change the engine oil
- 7.2.2. Change engine oil filter
- 7.2.3. Hydraulic oil filter
- 7.3. Every 10 hours of operation or daily
- 7.3.1. Engine oil level
- 7.3.2. Radiator coolant level check
- 7.3.3. Water separator
- 7.4. Every 50 hours
- 7.4.1. Drain water from fuel filter
- 7.4.2. Transmission oil level Common oil level (transmission/hydraulic/steering)
- 7.4.3. Air precleaner
- 7.4.4. Clutch pedal free play
- 7.4.5. Brake pedal free play
- 7.4.6. Wheel nut and bolt torque
- 7.4.7. Tire pressures and condition
- 7.4.8. Fan and alternator belt
- 7.4.9. Grease points TwoWheel Drive (2WD)
- 7.4.10. Grease points FourWheel Drive (4WD)
- 7.4.11. Front axle oil level
- 7.5. Every 150 hours
- 7.5.1. Service the engine air cleaner
- 7.5.2. Battery electrolyte level
- 7.6. Every 300 hours
- 7.6.1. Service the engine air cleaner
- 7.6.2. Change the fuel filter (primary)
- 7.6.3. Bleeding the fuel injection system
- 7.6.4. Fuel feed pump filter
- 7.6.5. Change the engine oil
- 7.6.6. Change engine oil filter
- 7.6.7. Transmission oil level Common oil level (transmission/hydraulic/steering)
- 7.6.8. Hydraulic oil filter
- 7.6.9. Front axle reduction hubs 4WD
- 7.6.10. D front axle swivel bearings
- 7.6.11. Front axle housing oil level 4WD
- 7.6.12. Drive shaft sleeve for 4WD front axle connection
- 7.6.13. PTO clutch lever free play
- 7.6.14. Roll Over Protective Structure (ROPS) adjustments
- 7.7. Every 600 hours
- 7.7.1. Service the engine air cleaner
- 7.7.2. Replace the engine fuel filter
- 7.7.3. Check the valve tappet clearance
- 7.7.4. Transmission breather
- 7.7.5. Clean, regrease and adjust the front wheel bearing
- 7.7.6. Toein adjustment
- 7.8. Every 1200 hours
- 7.8.1. Service the engine air cleaner
- 7.8.2. Fuel injectors servicing
- 7.8.3. Change the transmission fluid
- 7.8.4. Radiator Drain and Refill the Cooling System
- 7.8.5. Front axle housing oil level 4WD
- 7.8.6. Draining the oil from the front axle final drive hub 4WD
- 7.8.7. Brake oil (If applicable)
- 7.8.8. Fuel tank
- 7.9. General maintenance
- 7.9.1. Bleeding the fuel injection system
- 7.9.2. Engine idle speed
- 7.9.3. Headlights
- 7.9.4. Position lights
- 7.9.5. Canopy lights Adjust
- 7.9.6. Fuse replacement
- 7.9.7. Protecting the electronic and electrical systems during battery charging or welding
- 7.9.8. Dust screen
- 7.10. Storage
- 7.10.1. Tractor storage
- 8. TROUBLESHOOTING
- 8.1. Fault code resolution
- 8.1.1. Maintenance Troubleshooting
- 9. SPECIFICATIONS
- 9.1. General specification
- 9.2. Tractor dimensions
- 9.3. Transmission Speeds
- 10. FORMS AND DECLARATIONS
- 10.1. Predelivery report Owners copy
- 10.2. Predelivery report Dealers copy
