Description
-
Model List:
- ME 315 48V S3
- ME 316 48V S3
- ME 318 48V S3
- ME 320 48V S3
- 1. OPERATING AND SAFETY INSTRUCTIONS
- 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1.1. THE SITE
- 1.1.2. THE OPERATOR
- 1.1.3. THE LIFT TRUCK
- 1.1.3.1. A THE TRUCKS SUITABILITY FOR THE JOB
- 1.1.3.2. B ADAPTATION OF THE LIFT TRUCK TO STANDARD ENVIRONMENTAL CONDITIONS
- 1.1.3.3. C MODIFICATION OF THE LIFT TRUCK
- 1.1.4. INSTRUCTIONS
- 1.1.5. MAINTENANCE
- 1.2. INSTRUCTIONS FOR THE OPERATOR
- 1.2.1. FOREWORD
- 1.2.2. GENERAL INSTRUCTIONS
- 1.2.2.1. A OPERATORS MANUAL
- 1.2.2.2. B AUTHORISATION FOR USE IN FRANCE
- 1.2.2.3. C MAINTENANCE
- 1.2.2.4. D MODIFICATION OF THE LIFT TRUCK
- 1.2.2.5. E LIFTING PEOPLE
- 1.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
- 1.2.3.1. A BEFORE STARTING THE LIFT TRUCK
- 1.2.3.2. B DRIVERS OPERATING INSTRUCTIONS
- 1.2.3.3. C ENVIRONMENT
- 1.2.3.4. D VISIBILITY
- 1.2.3.5. E STARTING THE LIFT TRUCK
- 1.2.3.6. F DRIVING THE LIFT TRUCK
- 1.2.3.7. G STOPPING THE LIFT TRUCK
- 1.2.3.8. H DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAY
- 1.2.4. INSTRUCTIONS FOR HANDLING A LOAD
- 1.2.4.1. A CHOICE OF ATTACHMENTS
- 1.2.4.2. B WEIGHT OF LOAD AND CENTER OF GRAVITY
- 1.2.4.3. C TRANSVERSE ATTITUDE OF THE LIFT TRUCK
- 1.2.4.4. D PICKING UP A LOAD ON THE GROUND
- 1.2.4.5. PICKING UP AND LAYING DOWN A HIGH LOAD ON TIRES
- 1.3. LIFT TRUCK MAINTENANCE INSTRUCTIONS
- 1.3.1. GENERAL INSTRUCTIONS
- 1.3.2. MAINTENANCE
- 1.3.3. LUBRICANT LEVELS
- 1.3.4. ELECTRICITY
- 1.3.5. HYDRAULICS
- 1.3.6. WELDING
- 1.3.7. WASHING THE LIFT TRUCK
- 1.3.8. TRANSPORTING THE LIFT TRUCK
- 1.4. IF THE LIFT TRUCK IS NOT TO BE USED FOR A LONG TIME
- 1.4.1. INTRODUCTION
- 1.4.2. PREPARING THE LIFT TRUCK
- 1.4.3. PROTECTING THE LIFT TRUCK
- 1.4.4. BRINGING THE LIFT TRUCK BACK INTO SERVICE
- 1.5. LIFT TRUCK DISPOSAL
- 1.5.1. RECYCLING OF MATERIALS
- 1.5.1.1. METALS
- 1.5.1.2. PLASTICS
- 1.5.1.3. RUBBER
- 1.5.1.4. GLASS
- 1.5.2. ENVIRONMENTAL PROTECTION
- 1.5.2.1. WORN OR DAMAGED PARTS
- 1.5.2.2. USED OIL
- 1.5.2.3. USED BATTERIES
- 2. DESCRIPTION
- 2.1. CE DECLARATION OF CONFORMITY
- 2.2. SAFETY PLATES AND STICKERS
- 2.3. IDENTIFICATION OF THE LIFT TRUCK
- 2.4. CHARACTERISTICS
- 2.5. MAST CHARACTERISTICS AND LOAD CHARTS
- 2.6. BATTERY CHARACTERISTICS
- 2.7. FRONT AND REAR TYRES
- 2.8. INSTRUMENTS AND CONTROLS
- 3. MAINTENANCE
- 3.1. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 3.2. FILTERS AND CARTRIDGES
- 3.3. LUBRICANTS
- 3.4. SERVICING SCHEDULE
- 3.5. A DAILY OR EVERY 10 HOURS OF SERVICE
- 3.6. B EVERY 50 HOURS OF SERVICE
- 3.7. C EVERY 250 HOURS OF SERVICE
- 3.8. D EVERY 500 HOURS OF SERVICE
- 3.9. E EVERY 1000 HOURS OF SERVICE
- 3.10. F OCCASIONAL MAINTENANCE
- 4. OPTIONAL ADAPTABLE ATTACHMENTS FOR THE RANGE
- 4.1. INTRODUCTION
- 4.2. TECHNICAL CHARACTERISTICS OF ATTACHMENTS
- 4.3. ATTACHMENT SHIELDS
