Description
-
Model List:
- 222 Cutting Platform
- 1. Contents
- 1.1. Safety Instructions and Safety Signs
- 1.1.1. Recognize Safety Information
- 1.1.2. Follow Safety Instructions
- 1.1.3. Understand Signal Words
- 1.1.4. Prepare for Emergencies
- 1.1.5. Wear Protective Clothing
- 1.1.6. Transport harvester with cutter safely
- 1.1.7. Decommissioning Proper Recycling and Disposal of Fluids and Components
- 1.1.8. Acquire safety knowledge and information
- 1.1.9. Handle Agricultural Chemicals Safely
- 1.1.10. Stay Away from Cutting Platform
- 1.1.11. Keep hands away from blades
- 1.1.12. Use Safety Lights and Devices
- 1.1.13. Service Machines Safely
- 1.1.14. Practice Safe Maintenance
- 1.1.15. Avoid Heating Near Pressurized Fluid Lines
- 1.1.16. Remove Paint Before Welding or Heating
- 1.1.17. Avoid HighPressure Fluids
- 1.1.18. Proper load of front and rear axles
- 1.1.19. Support Machine Properly
- 1.1.20. Install All Guards
- 1.1.21. Running of harvester and cutter
- 1.1.22. Retightening Nuts of Front and Rear Wheels
- 1.1.23. Use Proper Tools
- 1.1.24. Store Attachments Safely
- 1.1.25. Safety Signs
- 1.2. Cutting Platform Coupling and Uncoupling
- 1.2.1. Cutter Coupling
- 1.2.2. Lock Feeder House Lift Cylinder Safety Stop
- 1.2.3. Cutting Platform Drive Shaft
- 1.2.4. Coupling Hydraulic Lines
- 1.2.5. Reel Speed Motor
- 1.2.6. Horizontal Adjustment of Cutter
- 1.2.7. Cutter Uncoupling
- 1.2.8. Coupling of Cutting Platform and Carrier
- 1.3. Cutting Platform Theory of Operation
- 1.3.1. Theory of Cutter Operation
- 1.4. Cutting Platform Operation and Adjustment
- 1.4.1. Using and Adjusting Properly per Agronomic and Crop Conditions
- 1.4.2. Harvesting Soybean (Flex Cutting Platform)
- 1.4.3. Harvesting Wheat, Oats, Corn (Rigid Cutting Platform and Flex Cutting Platform)
- 1.4.4. Harvesting Rice and Barley (Rigid Cutting Platform and Flex Cutting Platform)
- 1.4.5. Camaction Reel Level Adjustment
- 1.4.6. Adjusting Angle of Camaction Reel Tines
- 1.4.7. Adjusting Reel Arm Width
- 1.4.8. Reel Minimum Clearance Adjustment
- 1.4.9. Adjusting Reel Lifting Cylinder Height FineTune
- 1.4.10. Adjusting Reel Cylinder to Synchronize
- 1.4.11. Safety Stop for Reel Lift Cylinder
- 1.4.12. Bleeding Air from Reel Lifting Cylinder
- 1.4.13. Adjusting Reel Speed
- 1.4.14. Speed Motor
- 1.4.15. Adjusting Continuously Variable Disk
- 1.4.16. Cutterbar
- 1.4.17. Adjusting Cutterhead of Rigid Cutting Platform
- 1.4.18. Adjusting Cutterbar of Flex Cutting Platform
- 1.4.19. Indicator (Flex Cutting Platform)
- 1.4.20. Adjusting Indicator
- 1.4.21. Crop Divider
- 1.4.22. Soybean (Cutting Platform) Loss
- 1.5. Lubrication and Service
- 1.5.1. Lubrication and Maintenance Requirements
- 1.5.2. After Using Ten Hours
- 1.5.3. After End of Harvest Season
- 1.5.4. Preparation Before Start of Harvest Season
- 1.5.5. Lubrication Points
- 1.5.6. Swing Ring Box Oil
- 1.5.7. Storage of lubricating grease
- 1.5.8. Hour Lubrication Points
- 1.5.9. Hour Lubrication Points
- 1.5.10. Hour Lubrication Points
- 1.6. Failure Analysis and Troubleshooting
- 1.6.1. Failure Analysis
- 1.7. Storage
- 1.7.1. After End of Harvest Season
- 1.7.2. Before Start of Harvest Season
- 1.8. Technical Parameters
- 1.8.1. Cutting Platform Model, Cutting Width, Weight
- 1.8.2. Technical Parameters
- 1.8.3. Metric Bolt and Screw Torque Values
- 2. Page Number
- 2.1. Section 05
- 2.2. Section 10
- 2.3. Section 15
- 2.4. Section 20
- 2.5. Section 25
- 2.6. Section 30
- 2.7. Section 35
- 2.8. Section 40
