Case 1254, 1404 Tractor Operator Manual 51426552 PDF

Description

• Model List:
  • 1254 Tractor
  • 1404 Tractor

• 1. GENERAL INFORMATION
• 1.1. Metric and imperial units abbreviations
• 1.2. To the owner
• 1.3. Product Identification
• 1.4. Engine identification
• 1.5. Drive line identification
• 1.6. Product identification plate
• 1.7. Ecology and the environment
• 1.8. Safety rules
• 1.9. Personal safety
• 1.10. Driving the tractor
• 1.11. Operating the tractor
• 1.12. Fire extinguisher
• 1.13. Safety decals
• 1.14. International symbols
• 1.15. Airborne noise emission
• 1.16. Tractor vibration level information sheet
• 1.17. Machine stability
• 1.18. About this manual
• 1.19. Programming tractor functions
• 1.20. Before operating
• 1.21. Instructors seat
• 2. SAFETY INFORMATION
• 2.1. Safety precautions
• 2.2. Safety rules
• 2.3. Fire or explosion prevention
• 2.4. Protection offered by the tractor
• 2.5. Intended use statement
• 3. CONTROLS AND INSTRUMENTS
• 3.1. ACCESS TO OPERATORS PLATFORM
• 3.1.1. Cab and platform Access/Exit
• 3.1.2. Cab air recirculation filter
• 3.1.3. Cable and harness routing
• 3.1.4. Mobile telephone usage
• 3.1.5. Implement monitor installation
• 3.1.6. Cab pressurization monitor (where fitted)
• 3.1.7. Runningin procedure
• 3.2. OPERATORS SEAT
• 3.2.1. Seat belt and operator presence switch (where fitted)
• 3.3. FORWARD CONTROLS
• 3.3.1. Key start switch
• 3.3.2. Hazard warning light operation
• 3.3.3. Lights and turn indicator lever
• 3.3.4. Windshield wiper and washer controls
• 3.3.5. Steering column
• 3.3.6. Adjustable air vents
• 3.4. LEFTHAND SIDE CONTROLS
• 3.4.1. Handbrake
• 3.5. RIGHTHAND SIDE CONTROLS
• 3.5.1. Switch panel
• 3.6. REARWARD CONTROLS
• 3.6.1. Righthand side cab C pillar
• 3.7. OVERHEAD CONTROLS
• 3.7.1. Radio or audio system
• 3.8. INSTRUMENT CLUSTER
• 3.8.1. Instrument cluster
• 3.8.2. Gauges
• 3.8.3. Indicator and warning lights
• 3.8.4. Displays
• 3.8.5. Tractor ground speed display
• 3.8.6. Calibrating the ground speed display
• 3.8.7. Warning and advisory symbols
• 4. OPERATING INSTRUCTIONS
• 4.1. COMMISSIONING THE UNIT
• 4.1.1. Refueling the tractor
• 4.2. STARTING THE UNIT
• 4.2.1. Starting the engine
• 4.2.2. Fuel heater (where fitted)
• 4.2.3. Coolant immersion heater (where fitted)
• 4.2.4. Transmission oil heater (where fitted)
• 4.2.5. Booster battery procedure
• 4.3. STOPPING THE UNIT
• 4.3.1. Engine shutdown
• 4.4. MOVING THE UNIT
• 4.4.1. Operating in cold temperatures
• 5. TRANSPORT OPERATIONS
• 5.1. PREPARING FOR ROAD TRANSPORT
• 5.1.1. Carrying the tractor on a transporter
• 5.2. RECOVERY TRANSPORT
• 5.2.1. Towing the tractor
• 6. WORKING OPERATIONS
• 6.1. GENERAL INFORMATION
• 6.1.1. Differential control
• 6.1.2. Four wheel drive
• 6.2. TRANSMISSION
• 6.2.1. Full powershift transmission
• 6.2.2. Clutch pedal
• 6.2.3. Foot throttle pedal
• 6.2.4. Hand throttle lever
• 6.2.5. Transmission operation
• 6.2.6. Shuttle lever
• 6.2.7. Driving the tractor
• 6.2.8. Speed matching
• 6.3. REAR POWER TAKEOFF
• 6.3.1. PTO operation safety rules
• 6.3.2. Attaching PowerTake Off (PTO) driven equipment
• 6.3.3. PTO operation
• 6.3.4. Twospeed, shiftable P.T.O (where fitted)
• 6.3.5. Threespeed, shiftable P.T.O. (where fitted)
• 6.4. REAR HITCH
• 6.4.1. Electronic Hitch control (where fitted)
• 6.4.2. Electronic Hitch Control
• 6.5. HYDRAULIC REMOTE CONTROL VALVES
• 6.5.1. ELECTROHYDRAULIC REMOTE CONTROL VALVES (where fitted)
• 6.5.2. Operating continuous flow hydraulic equipment
• 6.5.3. Connecting remote cylinders
• 6.5.4. Rear Axle Hydraulic Oil Level
• 6.6. HYDRAULIC POWER BEYOND PORT
• 6.6.1. Hydraulic Power Beyond Port forExternal Services (where fitted)
• 6.6.2. Power Beyond Selector Control
• 6.7. THREE POINT HITCH
• 6.7.1. Threepoint hitch
• 6.7.2. Lift rods
• 6.7.3. Top link
• 6.7.4. Quick hitch
• 6.7.5. Linkage Stabilisers
• 6.8. DRAWBARS AND TOWING ATTACHMENTS
• 6.8.1. Drawbars and towing attachments
• 6.8.2. Swinging drawbars
• 6.9. WHEEL TRACK ADJUSTMENT
• 6.9.1. Front wheels
• 6.9.2. Front wheel alignment
• 6.9.3. Steering stops
• 6.9.4. Front axle oscillation stops
• 6.9.5. Dynamic Front Fenders (where fitted)
• 6.9.6. Rear wheel track adjustment
• 6.10. BALLASTING AND TIRES
• 6.10.1. Ballasting and tires
• 6.10.2. Cast iron weights (where fitted)
• 6.10.3. Liquid Ballast
• 6.10.4. Tire care
• 6.10.5. Tire pressures and permissible loads
• 6.11. AUXILIARY POWER CONNECTIONS
• 6.11.1. Seven pin electrical power outlet
• 6.11.2. Internal power connectors
• 6.11.3. External power connectors
• 6.11.4. SEATS
• 7. MAINTENANCE
• 7.1. GENERAL INFORMATION
• 7.1.1. General Information
• 7.1.2. Preventing system contamination
• 7.1.3. Diesel Fuel Requirements
• 7.1.4. Biodiesel fuels
• 7.1.5. Guards
• 7.1.6. Lubricants and coolants
• 7.1.7. Tractor jacking points
• 7.1.8. Lubricant, fuel and coolant specifications
• 7.2. MAINTENANCE CHART
• 7.2.1. Maintenance chart
• 7.3. WHEN THE WARNING LAMP LIGHTS
• 7.3.1. Engine air cleaner
• 7.3.2. Drain the fuel system water separator
• 7.3.3. Check the brake fluid level
• 7.4. EVERY 10 HOURS OR EACH DAY
• 7.4.1. Check engine coolant level
• 7.4.2. Check engine oil level
• 7.4.3. Check windscreen washer reservoir
• 7.5. FIRST 50 HOURS
• 7.5.1. The First 50Hour Service
• 7.6. EVERY 50 HOURS
• 7.6.1. Clean the cab air filters
• 7.6.2. Clean the radiator, oil cooler and air conditioner condenser cores
• 7.6.3. Grease fittings
• 7.6.4. Check the front and the rear wheel nuts
• 7.6.5. Tire inflation pressures
• 7.7. EVERY 100 HOURS
• 7.7.1. Airconditioning compressor drive belt
• 7.7.2. Inspect the poly Vbelt
• 7.8. EVERY 300 HOURS
• 7.8.1. Battery
• 7.8.2. D Suspension cylinder upper bearing
• 7.8.3. Parking brake Adjust
• 7.8.4. Check transmission/rear axle and hydraulic oil level
• 7.9. EVERY 600 HOURS
• 7.9.1. Engine oil and filters
• 7.9.2. Fuel filters
• 7.9.3. Change the engine air cleaner outer element
• 7.9.4. Transmission / hydraulic oil filters
• 7.9.5. Check the engine air intake connections
• 7.10. EVERY 1200 HOURS OR ANNUALLY
• 7.10.1. Cab air filters
• 7.10.2. Changing the transmission andHydraulic oil filters with argo filter
• 7.10.3. Change transmission,rear axle and hydraulic oil and filters
• 7.10.4. Four wheel drive lubrication
• 7.10.5. Front axle hubs
• 7.10.6. Front Power TakeOff (PTO)
• 7.11. EVERY 1200 HOURS OR EVERY 2 YEARS
• 7.11.1. Battery
• 7.11.2. Engine air cleaner
• 7.11.3. Check the valve tappet clearance
• 7.11.4. Change the air brake drier reservoir
• 7.11.5. Clean and reset fuel injectors
• 7.12. EVERY 3600 HOURS OR EVERY 4 YEARS
• 7.12.1. Cooling system OAT type coolant
• 7.13. EVERY 36 MONTHS
• 7.13.1. Service the air conditionersystem
• 7.14. GENERAL MAINTENANCE
• 7.14.1. Cleaning the tractor
• 7.14.2. Fuel prefilter (where fitted)
• 7.14.3. Fuel system bleeding
• 7.14.4. Brake pedals
• 7.14.5. Engine idle speed
• 7.14.6. Lighting system
• 7.14.7. Bulb replacement
• 7.14.8. Fuses and Relays
• 7.14.9. Protection of the electronic modules during welding operations
• 7.15. STORAGE
• 7.15.1. Tractor storage
• 7.15.2. Removal of tractor from storage
• 8. TROUBLESHOOTING
• 8.1. FAULT CODE RESOLUTION
• 8.1.1. Threepoint hitch
• 8.1.2. Brakes
• 8.1.4. Electrical system
• 9. SPECIFICATIONS
• 9.1. General dimensions
• 9.2. Frame General specification
• 9.3. Capacities
• 9.4. Engine
• 9.5. Cooling system
• 9.6. Hydraulic system
• 9.7. Remote control valves
• 9.8. Lift capacities
• 9.9. Brakes
• 9.10. Steering system
• 9.11. Tightening torques
• 10. ACCESSORIES
• 10.1. Frontend loader fixation points
• 11. FORMS AND DECLARATIONS
• 11.1. Service record 1st 50 hour, Dealer copy
• 11.2. Service record 1st 50 hour, Owner copy