Description
-
Model List:
- Farmlift 632 Stage IV Telescopic Handler
- Farmlift 635 Stage IV Telescopic Handler
- Farmlift 735 Stage IV Telescopic Handler
- Farmlift 742 Stage IV Telescopic Handler
- Farmlift 935 Stage IV Telescopic Handler
- 1. GENERAL INFORMATION
- 1.1. Note to the owner
- 1.2. Intended use
- 1.3. ElectroMagnetic Compatibility (EMC)
- 1.4. Manual scope and required training level
- 1.5. Product identification
- 1.6. Operators manual storage on the machine
- 1.7. Machine orientation
- 1.8. Machine components
- 2. SAFETY INFORMATION
- 2.1. Safety rules and signal word definitions
- 2.2. Safety rules
- 2.3. Personal safety
- 2.4. Driving on public roads and general transportation safety
- 2.5. Seat belts
- 2.6. Cab Protection System (ROPS/FOPS)
- 2.7. Ecology and environment
- 2.8. Hand signals
- 2.9. EU Regulation
- 2.10. Safety aspects in accordance with Regulation (EU) 1322/2014 Annex XXII and subsequent amendments and modifications
- 2.11. Noise and vibration levels
- 2.12. Safety signs
- 3. CONTROLS AND INSTRUMENTS
- 3.1. Access to operators platform
- 3.1.1. Proper entry and exit
- 3.2. Operators seat
- 3.2.1. Overview
- 3.3. Forward controls
- 3.3.1. Steering column
- 3.3.2. Pedals
- 3.3.3. Front righthand console
- 3.4. Lefthand side controls
- 3.4.1. Switches (lefthand panel)
- 3.4.2. Spirit Level
- 3.5. Righthand side controls
- 3.5.1. Climate controls
- 3.5.2. Switches (righthand panel)
- 3.5.3. Joystick
- 3.5.4. Wrist rest
- 3.6. Instrument cluster
- 3.6.1. Instrument cluster Overview
- 3.6.2. Longitudinal Load Moment Indicator
- 3.6.3. Display
- 4. OPERATING INSTRUCTIONS
- 4.1. Commissioning the unit
- 4.1.1. Runningin procedure
- 4.1.2. Refueling
- 4.2. Starting the unit
- 4.2.1. Starting the engine
- 4.3. Stopping the unit
- 4.3.1. Stopping the engine
- 4.3.2. Battery disconnect
- 4.3.3. Parking brake
- 4.4. Moving the unit
- 4.4.1. Driving the telehandler
- 4.4.2. Steering mode selection
- 5. TRANSPORT OPERATIONS
- 5.1. Road transport
- 5.1.1. Towing and transport
- 5.2. Recovery transport
- 5.2.1. Lifting
- 6. WORKING OPERATIONS
- 6.1. General information
- 6.1.1. Preparing to drive
- 6.1.2. Load handling
- 6.1.3. Quick coupler
- 6.1.4. Installing attachments
- 7. MAINTENANCE
- 7.1. General information
- 7.1.1. Basic instructions
- 7.1.2. Tool box
- 7.1.3. Selective Catalytic Reduction (SCR) system
- 7.1.4. General specification Diesel fuel
- 7.1.5. General specification Biodiesel fuels
- 7.1.6. Fluids and lubricants
- 7.1.7. Engine cooling system
- 7.2. Maintenance planning
- 7.2.1. Maintenance chart
- 7.3. Every 10 hours
- 7.3.1. Engine oil level Check
- 7.3.2. Hydraulic oil level Check
- 7.3.3. Transmission oil level Check
- 7.3.4. Boom cylinders bushings Grease
- 7.4. Every 50 hours
- 7.4.1. Engine coolant level Check
- 7.4.2. Radiators Cleaning
- 7.4.3. Fuel prefilter Drain fluid
- 7.4.4. Cab air filter Check and cleaning
- 7.4.5. Boom pads Grease
- 7.4.6. Boom bushing Grease
- 7.4.7. Wheels, tires and wheels nuts Check
- 7.5. Initial 100 hours
- 7.5.1. DEF/AdBlue inline filter Cleaning (initial 100 hours)
- 7.6. Every 150 hours
- 7.6.1. Front and rear axle Grease
- 7.7. Initial 250 hours
- 7.7.1. Transmission oil Change (initial 250 hours)
- 7.8. Every 250 hours
- 7.8.1. Engine air filter Cleaning
- 7.8.2. Compressor drive belt Check
- 7.9. Every 350 hours
- 7.9.1. Front and rear axle oil level Check
- 7.9.2. Axles reduction gears oil level Check
- 7.10. Every 500 hours
- 7.10.1. Engine oil and filter Replace
- 7.10.2. Engine air filter Replace
- 7.10.3. Fuel prefilter Replace
- 7.10.4. Fuel filter Replace
- 7.10.5. Hydraulic oil filter Replace
- 7.10.6. Boom pads Check
- 7.10.7. Chains Lubricate Farmlift 9.35 model only
- 7.10.8. Battery electrolyte level Check
- 7.11. Every 1000 hours
- 7.11.1. Chains Check Farmlift 9.35 model
- 7.11.2. Cab air filter Replace
- 7.11.3. Drive belt Check
- 7.11.4. Transmission oil and filter Replace
- 7.12. Every 1500 hours
- 7.12.1. Front and rear axle oil Change
- 7.12.2. Axles reduction gears oil Change
- 7.12.3. Engine breather filter Replace
- 7.12.4. DEF/AdBlue inline filter Cleaning
- 7.13. Every 2000 hours
- 7.13.1. Engine coolant Change
- 7.13.2. Hydraulic oil and suction filter Replace
- 7.13.3. Brake oil Change
- 7.14. Every 2400 hours
- 7.14.1. Engine valve clearance Check and adjust
- 7.15. Every 3600 hours
- 7.15.1. Selective Catalytic Reduction System (SCR) Supply Module filter Replace
- 7.16. As required
- 7.16.1. DEF/AdBlue tank neck filter Cleaning
- 7.16.2. Alternator charging system Check
- 7.16.3. Lights Replace
- 7.16.4. Fuses and relays Replace
- 7.16.5. Cleaning
- 7.16.6. Windshield washer fluid level Check
- 7.16.7. Door and window hinges Lubricate
- 7.16.8. Hydraulic connectors and hoses Replace
- 7.16.9. Check the Wheel toein
- 7.16.10. Adjust the Steering stops
- 7.17. Storage
- 7.17.1. Vehicle prolonged inactivity
- 7.17.2. Tires and wheels
- 7.17.3. Starting with jump leads
- 7.17.4. Preparing the machine after storage
- 8. TROUBLESHOOTING
- 8.1. Fault code resolution
- 8.1.1. Offboard diagnostics
- 9. SPECIFICATIONS
- 9.1. Machine specifications
- 9.2. General specifications
- 9.3. Machine dimensions
- 9.4. Load specifications
- 9.5. Tire types
- 9.6. Machine weights
- 10. ACCESSORIES
- 10.1. Attachments
- 10.2. Telematics
- 11. FORMS AND DECLARATIONS
- 11.1. Declaration of conformity Facsimile
- 11.2. Certificate of conformity Facsimile
- 11.3. Predelivery check
