John Deere 625, 630, and 635 Mower-Conditioner Operator Manual OMFH311959-1
John Deere 625, 630, and 635 Mower-Conditioner Operator Manual OMFH311959-2
John Deere 625, 630, and 635 Mower-Conditioner Operator Manual OMFH311959-3
John Deere 625, 630, and 635 Mower-Conditioner Operator Manual OMFH311959-1
John Deere 625, 630, and 635 Mower-Conditioner Operator Manual OMFH311959-2
John Deere 625, 630, and 635 Mower-Conditioner Operator Manual OMFH311959-3

John Deere 625, 630, 635 Mower-Conditioner Operator Manual OMFH311959

$30

  • Type Of Manual: Operator Manual
  • Manual ID: OMFH311959
  • Format: PDF
  • Size: 13.3MB
  • Number of Pages: 144
Category: Tag:
Description
  • Model List:

    • 625 Mower-Conditioner
    • 630 Mower-Conditioner
    • 635 Mower-Conditioner
  • 1. Contents
  • 1.1. Identification View
  • 1.1.1. Identification View
  • 1.1.2. Recognize Safety Information
  • 1.1.3. Understand Signal Words
  • 1.1.4. Follow Safety Instructions
  • 1.1.5. Spanish Safety Signs and Operators Manual
  • 1.1.6. Maintain a Safety Area Around the Machine
  • 1.1.7. Operate Safely
  • 1.1.8. Keep Riders Off Machine
  • 1.1.9. Towing the Machine on Public Roads
  • 1.1.10. Tow Loads Safely
  • 1.1.11. Prepare for Emergencies
  • 1.1.12. Fire Prevention
  • 1.1.13. In Case of Fire
  • 1.1.14. Wear Protective Clothing
  • 1.1.15. Protect Against Noise
  • 1.1.16. Service Machines Safely
  • 1.1.17. Check Machine Safety
  • 1.1.18. Stay Clear of Rotating Drivelines
  • 1.1.19. Avoid Injury from Thrown Objects
  • 1.1.20. Use Safety Lights and Devices
  • 1.1.21. Service Tires Safely
  • 1.1.22. Use a Safety Chain
  • 1.1.23. Practice Safe Maintenance
  • 1.1.24. Support Machine Properly
  • 1.1.25. Remove Paint Before Welding or Heating
  • 1.1.26. Avoid Heating Near Pressurized Fluid Lines
  • 1.1.27. Avoid HighPressure Fluids
  • 1.1.28. Avoid HighPressure Jet on Safety Decals
  • 1.1.29. Decommissioning Proper Recycling and Disposal of Fluids and Components
  • 1.2. Safety Decals
  • 1.2.1. Safety Decals
  • 1.2.2. Platform (Top) Decals
  • 1.3. Preparing the Tractor
  • 1.3.1. Selecting Tractor PTO Speed
  • 1.3.2. Adjusting Sway Blocks
  • 1.3.3. Checking Ballast, Wheel Spacing, and Tire Inflation
  • 1.3.4. Positioning Tractor Drawbar (Standard Hitch)
  • 1.3.5. Using Drawbar Shield (Standard Hitch)
  • 1.3.6. Making a Drawbar Shield (Standard Hitch)
  • 1.3.7. Install Drawbar Extension (Standard Tongue and Ball Hitch)
  • 1.3.8. Setting Selective Control Valves
  • 1.4. Preparing the MowerConditioner
  • 1.4.1. Check Tire Inflation Pressure
  • 1.4.2. Check Wheel Hardware Torque
  • 1.4.3. Adjusting Standard Hitch
  • 1.4.4. Determining Need for Turn Limiters
  • 1.4.5. Install Narrow Turn Limiters (If Required)
  • 1.4.6. Install Wide Turn Limiters (If Required)
  • 1.5. Attaching and Detaching
  • 1.5.1. Attaching to Tractor
  • 1.5.2. Standard Tongue With Ball Hitch
  • 1.5.3. Standard Tongue With Clevis Hitch
  • 1.5.4. Swivel Hitch (With Downstop Chain Using Bolt and Washer)
  • 1.5.5. PTO Speed
  • 1.5.6. Assembling Main PTO Driveline Splined Telescoping Members (If Necessary)
  • 1.5.7. Attaching PTO Driveline
  • 1.5.8. Tractor Electrical Connection
  • 1.5.9. Connecting Tail/Warning Light Plug to Tractor
  • 1.5.10. Connecting MowerConditioner to Tractor Hydraulic System
  • 1.5.11. Securing Jackstand in Transport Position
  • 1.5.12. Setting Tongue Swing Time
  • 1.5.13. Detaching from Tractor
  • 1.5.14. PTO Storage
  • 1.6. Transporting
  • 1.6.1. Preparing MowerConditioner for Transport
  • 1.6.2. Use Safety Lights and Devices
  • 1.6.3. Towing MowerConditioner on Public Roads
  • 1.7. Breakin period
  • 1.7.1. Breakingin MowerConditioner
  • 1.8. Operating the MowerConditioner
  • 1.8.1. Follow Safe Operating Procedures
  • 1.8.2. Daily Checks
  • 1.8.3. Preparing MowerConditioner for Field Operation
  • 1.8.4. Raising Curtains
  • 1.8.5. Lowering Curtains
  • 1.8.6. Adjusting Cutting Height
  • 1.8.7. Adjusting Gauge Shoes
  • 1.8.8. Adjusting Lift Cylinder
  • 1.8.9. Adjusting Platform Float
  • 1.8.10. Opening a New Field
  • 1.8.11. Turning in Field
  • 1.8.12. Adjusting Windrow Width
  • 1.8.13. Adjusting Swath Board
  • 1.8.14. Properly Conditioned Crop (Roll Conditioner)
  • 1.8.15. Checking Conditioning Effect (Impeller Conditioner)
  • 1.8.16. Adjusting Conditioning Intensity
  • 1.8.17. Changing Impeller Rotor Speed
  • 1.8.18. Adjusting Roll Pressure (Machines Beginning with Serial No. 370001)
  • 1.8.19. Adjusting Roll Spacing
  • 1.9. Attachments
  • 1.9.1. RPM Rotor Speed
  • 1.9.2. Gauge Shoe Extensions
  • 1.9.3. Hydraulic Tilt Control
  • 1.9.4. Drawbar Shield
  • 1.9.5. Turn Limiters
  • 1.9.6. Wide Swath Kit
  • 1.10. Lubrication and Maintenance
  • 1.10.1. Lubricating and Maintaining Machine Safely
  • 1.10.2. Observe Service Intervals
  • 1.10.3. Cutterbar Oil, Platform Gear Case Oil, and Roll Drive Gear Case Oil
  • 1.10.4. Swivel Gear Case Oil
  • 1.10.5. Alternative and Synthetic Lubricants
  • 1.10.6. Mixing of Lubricants
  • 1.10.7. Lubricant Storage
  • 1.10.8. Perform Lubrication and Maintenance
  • 1.10.9. As Required Float Spring Adjuster
  • 1.10.10. Every 10 Hours Primary Driveline (Equal Angle and Swivel Tongues)
  • 1.10.11. Every 10 Hours Fixed Driveline (Machines Equipped With Swivel Tongue)
  • 1.10.12. Every 10 Hours Pedestal Shaft Yoke (Machines Equipped With Equal Angle Tongue)
  • 1.10.13. Every 10 Hours Platform Driveline With Overrunning Yoke
  • 1.10.14. Every 10 Hours Tongue Pivot
  • 1.10.15. Every 10 Hours Cutterbar
  • 1.10.16. Every 10 Hours Cutterbar Driveline
  • 1.10.17. Every 10 Hours Wheel Arm Pivots (LeftHand and RightHand Side)
  • 1.10.18. Every 10 Hours LeftHand Cutterbar Link Pivots
  • 1.10.19. Every 10 Hours Roll Pivots (Roll Conditioner)
  • 1.10.20. Every 10 Hours Roll Driveline
  • 1.10.21. After First 50 Hours Swivel Hitch Gear Cases
  • 1.10.22. After the First 50 Hours Platform Drive Gear Case
  • 1.10.23. After the First 50 Hours Cutterbar
  • 1.10.24. Every 50 Hours Checking Cutterbar Oil Level
  • 1.10.25. Every 50 Hours Conditioner Belt Idler Tensioning Spring
  • 1.10.26. Every 50 Hours Hydraulic Hoses
  • 1.10.27. Every 100 Hours Platform Drive Gear Case Oil Level
  • 1.10.28. Every 250 Hours or Yearly Draining and Refilling Cutterbar
  • 1.10.29. Every 250 Hours or Yearly Draining and Refilling Swivel Hitch Gear Cases
  • 1.10.30. Every 250 Hours or Yearly Swivel Hitch Gear Case Pivot
  • 1.10.31. Every 250 Hours or Yearly Roll Drive Gear Case
  • 1.10.32. Every 1000 Hours or Yearly Draining and Refilling Platform Drive Gear Case
  • 1.10.33. Each Season Phasing Cylinders
  • 1.10.34. Every 6 Years Hydraulic Hoses
  • 1.11. Troubleshooting
  • 1.11.1. MowerConditioner Operation
  • 1.11.2. Telescoping HookUp Locking System
  • 1.11.3. End Yokes
  • 1.11.4. Inboard Yokes
  • 1.11.5. Telescoping HookUp Guards
  • 1.12. Service
  • 1.12.1. Metric Bolt and Screw Torque Values
  • 1.12.2. Practice Safe Service Procedures
  • 1.12.3. Use Genuine John Deere Parts
  • 1.12.4. Fire Prevention
  • 1.12.5. Replacing Impeller Drive Belt
  • 1.12.6. Adjusting Impeller Drive Belt Tension
  • 1.12.7. Replacing Roll Conditioner Drive Belt
  • 1.12.8. Adjusting Roll Conditioner Drive Belt Tension
  • 1.12.9. Synchronizing Rolls
  • 1.12.10. Removing Disks
  • 1.12.11. Installing and Synchronizing Disks
  • 1.12.12. Removing Knives
  • 1.12.13. Understanding Direction of Knife Rotation
  • 1.12.14. Installing Knives
  • 1.12.15. Checking Knives
  • 1.12.16. Checking Knife Wear
  • 1.12.17. Checking Knife Fitting Hole
  • 1.12.18. Checking Knife Hardware
  • 1.12.19. Checking Knife Bolt Wear
  • 1.12.20. Checking Knife Lock Nut Wear
  • 1.12.21. Replacing Wear Shield on Knife Bolt
  • 1.12.22. Replacing Disk Driver
  • 1.12.23. Replacing LeftHand End Converging Disk Driver
  • 1.12.24. Replacing RightHand End Converging Disk Driver
  • 1.12.25. Replacing Rotor Tines
  • 1.12.26. Changing Wheel
  • 1.12.27. Adjusting Main PTO Driveline Slip Clutch (540 rpm Only)
  • 1.12.28. Slipping PTO Driveline Slip Clutch (540 rpm Only)
  • 1.13. Storage
  • 1.13.1. Storing MowerConditioner (End of Season)
  • 1.13.2. Removing MowerConditioner from Storage (Beginning of Season)
  • 1.14. Specifications
  • 1.14.1. Specification for 625 MowerConditioner
  • 1.14.2. Specification for 630 MowerConditioner
  • 1.14.3. Specification for 635 MowerConditioner
  • 1.14.4. Machine Weights
  • 1.15. Serial Numbers
  • 1.15.1. Serial Number Plate
  • 1.15.2. MowerConditioner Serial Number Record
  • 1.15.3. Keep Proof of Ownership
  • 1.15.4. Keep Machines Secure
  • 1.16. John Deere Service Keeps You On The Job
  • 1.16.1. John Deere Is At Your Service
  • 2. Page Number
  • 2.1. Section 001
  • 2.2. Section 05
  • 2.3. Section 10
  • 2.4. Section 15
  • 2.5. Section 20
  • 2.6. Section 25
  • 2.7. Section 30
  • 2.8. Section 40
  • 2.9. Section 45
  • 2.10. Section 50
  • 2.11. Section 55
  • 2.12. Section 60
  • 2.13. Section 65
  • 2.14. Section 70
  • 2.15. Section 75
  • 2.16. Section 80
5/5 - (185 votes)

Related products

-50%
Mahindra Tractor 10 Series 4010 HST Full Operator Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 10 Series 4010 HST Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 3016 3616 Auxiliary-Valve Instruction Fast Download
Quick View

Mahindra

Mahindra Tractor 16 Series 3016 3616 Auxiliary-Valve Instruction

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 10 Series 5010 HST Cab Full Operator Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 10 Series 5010 HST Cab Operator Manual

$20
Add to cart
Mahindra Tractor 16 Series 3316 Gear HST Full Parts Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 16 Series 3316 Gear HST Parts Manual

$20
Add to cart
Mahindra Tractor 16 Series 3016 Gear HST Full Parts Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 16 Series 3016 Gear HST Parts Manual

$20
Add to cart
-50%
Mahindra Tractor 15 Series 2015 4WD Full Operator Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 15 Series 2015 4WD Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 3316 Gear HST Full Operator Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 16 Series 3316 Gear HST Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 16 Series 3616 Gear HST Full Parts Manual Fast Download
Quick View

Mahindra

Mahindra Tractor 16 Series 3616 Gear HST Parts Manual

$20
Add to cart