John Deere 673 Loader Operator Manual OMPXX12890

Description

• Model List:
  • 673 Loader

• 1. Introduction
• 1.1. Foreword
• 2. General Information
• 2.1. Machine Overview
• 2.2. Product View
• 2.3. Trademarks
• 2.4. Abbreviations
• 2.5. Regions and Country Versions
• 2.6. Dealers Record
• 2.7. Predelivery
• 2.8. Delivery
• 2.9. AfterSale
• 2.10. Record Product Identification Number
• 2.11. Keep Proof of Ownership
• 2.12. Keep Machines Secure
• 2.13. To the Dealer
• 2.14. Recognize Safety Information
• 2.15. Understand Signal Words
• 2.16. Follow Safety Instructions
• 2.17. Prepare for Emergencies
• 2.18. Wear Protective Clothing
• 2.19. Park Machine Safely
• 2.20. Protect People and Animals
• 2.21. Operating the Loader Tractor Safely
• 2.22. Use Seat Belt Properly
• 2.23. Use Foldable ROPS and Seat Belt Properly
• 2.24. Use Caution on Slopes, Uneven Terrain, and Rough Ground
• 2.25. Avoid Injury or Death from Falling Loads
• 2.26. Carry Materials Safely
• 2.27. Transporting Round Bales Safely
• 2.28. Operate Grapple (If Equipped)
• 2.28.1. Avoid Injury or Death from Falling Round Bales
• 2.28.2. How to Pick Up a Round Bale
• 2.28.3. How to Pick Up a Round Bale on a Slope
• 2.28.4. How to Transport a Round Bale
• 2.28.5. How to Remove Material from a Pile
• 2.29. Driving on Public Roads
• 2.30. Operating Loader with Attachments from Other Manufacturers
• 2.31. Operate Bucket/Attachment Safely
• 2.32. Operating NonSelfLevelling Loaders
• 2.33. Avoid Power Lines
• 2.34. Dig Safely
• 2.35. Detach Loader Safely
• 2.36. Use Safety Lights and Devices
• 2.37. Practice Safe Maintenance
• 2.38. Service Loader Safely
• 2.39. Service Machines Safely
• 2.40. Service Accumulator Systems Safely
• 2.41. Avoid Heating Near Pressurized Fluid Lines
• 2.42. Check Hoses for Damage
• 2.43. Avoid HighPressure Fluids
• 2.44. Remove Paint Before Welding or Heating
• 2.45. Decommissioning Proper Recycling and Disposal of Fluids and Components
• 3. Safety Signs
• 3.1. Pictorial Safety Signs
• 3.2. Replace Safety Signs
• 3.3. Avoid HighPressure Spray on Safety Decals
• 3.4. Ballast Box
• 3.5. Accumulator
• 3.6. Multicoupler
• 4. Prepare Tractor
• 4.1. Prepare the Tractor
• 4.2. Approved Tractors
• 4.3. Rear Ballast
• 4.4. Front Tire Load Index and Rear Ballast Requirements
• 4.4.1. Ballast
• 4.4.2. Tire Rating
• 4.5. Remove Front Weights and Weight Support
• 4.6. Front Tread Settings (2Wheel Drive Tractors)
• 4.7. Front Tire Tread Setting and Fender Compatibility (MFWD Tractor)
• 4.8. Rear Tread Settings
• 4.9. Attach Ballast Box to Tractor Hitch
• 4.10. Adjust EICV Functions (6X20 and 7X20 Premium Tractors)
• 4.11. Adjust EICV Functions (6X30 and 7X30 Premium Tractors)
• 5. Controls
• 5.1. Operate Loader with MultiFunction Lever
• 5.1.1. Mechanical MultiFunction Lever (Early Version)
• 5.1.2. Mechanical MultiFunction Lever (Later Version)
• 5.1.3. Electronic MultiFunction Lever
• 5.2. Relieve Hydraulic Pressure
• 6. Detach Loader
• 6.1. Detach Loader
• 7. Attach Loader
• 7.1. Attach Loader
• 8. Transport
• 8.1. Keep Riders Off Machine
• 8.2. Driving on Public Roads
• 8.3. Carry Loads
• 9. Operate Loader
• 9.1. Raise and Lower Loader
• 9.2. Use Service Locks
• 9.3. Remove Material from a Pile
• 9.4. Dump Bucket
• 9.5. Level Bucket
• 9.6. Level and Scrape Forward
• 9.7. Level in Reverse
• 9.8. Operate Grapple (If Equipped)
• 9.8.1. Avoid Injury or Death from Falling Round Bales
• 9.8.2. How to Pick up a Round Bale
• 9.8.3. How to Pick up a Round Bale on a Slope
• 9.8.4. How to Transport a Round Bale
• 9.8.5. How to Remove Material from a Pile
• 9.9. Detach the Bucket or Attachment
• 9.9.1. Style Carrier
• 9.9.2. Style Carrier with QUIKCHANGE Latch Plates
• 9.9.3. Global Carrier (Manual)
• 9.9.4. SkidSteer Carrier
• 9.10. Attach the Bucket or Attachment
• 9.10.1. Style Carrier
• 9.10.2. Style Carrier with QUIKCHANGE Latch Plates
• 9.10.3. Global Carrier (Manual)
• 9.10.4. SkidSteer Carrier
• 9.10.5. Hydraulically Operated Attachments
• 9.11. Attachments Available
• 10. Lubrication and Maintenance
• 10.1. Lubricate and Maintain Loader Safely
• 10.2. Perform Lubrication and Maintenance
• 10.3. Observe Lubrication Symbols
• 10.4. Multipurpose Extreme Pressure (EP) Grease
• 10.5. Alternative and Synthetic Lubricants
• 10.6. First 10 Hours
• 10.7. Every 10 Hours
• 10.7.1. Standard Loader
• 10.7.2. Mechanical SelfLevel Loader
• 10.7.3. Style CarrierBucket or Attachment Latch Pins
• 10.7.4. Global CarrierLatch Pin
• 10.7.5. SkidSteer Carrier
• 10.8. Every 50 Hours
• 11. Service
• 11.1. Service Loader or Tractor Safely (Loader Attached)
• 11.2. Work in Clean Area
• 11.3. Avoid HighPressure Fluids
• 11.4. ORing Installation
• 11.5. Tighten Hydraulic Fittings and Hoses
• 11.6. Replace Hydraulic Hoses, Couplers, Tubing, or Connectors
• 11.7. Access Front of Tractor
• 11.8. Identify Hose ConnectionsLoader to MidMount Couplers and Valve (All EXCEPT 7200, 7210, 7400, and 7410 Tractors)
• 11.9. Identify Hose ConnectionsLoader to Valves at Rear of Tractor (7200, 7210, 7400, and 7410 Tractors)
• 11.10. Adjust QUIKCHANGE Latch Plates (600Style Carrier)
• 11.11. Metric Bolt and Screw Torque Values
• 11.12. Unified Inch Bolt and Screw Torque Values
• 12. Specifications
• 12.1. Mechanical SelfLeveling Loader on 6105J Tractor
• 12.2. Mechanical SelfLeveling Loader on 6430 and 6110J Tractors
• 12.3. Non SelfLeveling Loader on 6430 and 6110J Tractors
• 12.4. Mechanical SelfLeveling Loader on 6E Series Tractors
• 12.5. Non SelfLeveling Loader on 6E Series Tractors
• 12.6. Mechanical SelfLeveling Loader on 6140J Tractor
• 12.7. Mechanical SelfLeveling Loader on 6603 (040000) Tractor
• 12.8. Mechanical SelfLeveling Loader on 6715 Tractor
• 12.9. Non SelfLeveling Loader on 6715 Tractor
• 12.10. Mechanical SelfLeveling Loader on 7320 Tractor
• 12.11. Non SelfLeveling Loader on 7320 Tractor
• 12.12. Mechanical SelfLeveling Loader on 6130D Tractor
• 12.13. Non SelfLeveling Loader on 6130D Tractor
• 12.14. Mechanical SelfLeveling Loader on 7230 Tractor
• 12.15. Non SelfLeveling Loader on 7230 Tractor
• 12.16. Round Bale Handling Capacities
• 12.16.1. Round Bale Sizes and Weights
• 13. Assembly
• 13.1. Perform Predelivery Service Safely
• 13.2. Installation Instructions Available Online to John Deere Dealers
• 13.3. Recommended Set Up and Assembly Sequence
• 13.4. Prepare the Tractor
• 13.5. Prepare the Loader
• 13.6. Position Loader on Mounting Frames
• 13.7. Install Bucket or Attachment
• 13.8. Final Inspection and Adjustments
• 13.9. Install Optional Equipment and Attachments
• 14. CE Approval Specifications
• 14.1. EC Declaration of Conformity
• 14.2. CE Label
• 15. John Deere Service Keeps You On The Job
• 15.1. John Deere Parts
• 15.2. The Right Tools
• 15.3. WellTrained Technicians
• 15.4. Prompt Service