John Deere CP12D, CP18D, CP24D, CP30D Cold Planer Operator Manual OMT372805X19

Description

• Model List:
  • CP12D Cold Planer
  • CP18D Cold Planer
  • CP24D Cold Planer
  • CP30D Cold Planer

• 1. Contents
• 1.1. SafetySafety and Operator Conveniences
• 1.1.1. Safety and Operator Convenience Features
• 1.2. SafetyGeneral Precautions
• 1.2.1. Recognize Safety Information
• 1.2.2. Follow Safety Instructions
• 1.2.3. Operate Only If Qualified
• 1.2.4. Wear Protective Equipment
• 1.2.5. Avoid Unauthorized Attachment Modifications
• 1.2.6. Protect Against Flying Debris
• 1.2.7. Inspect Attachment
• 1.2.8. Stay Clear of Moving Parts
• 1.2.9. Avoid HighPressure Fluids
• 1.2.10. Avoid HighPressure Oils
• 1.2.11. Decommissioning Proper Recycling and Disposal of Fluids and Components
• 1.2.12. Add Cab Guarding for Special Uses
• 1.3. SafetyOperating Precautions
• 1.3.1. Use Steps and Handholds Correctly
• 1.3.2. Start Only From Operators Seat
• 1.3.3. Prevent Unintended Machine Movement
• 1.3.4. Avoid Work Site Hazards
• 1.3.5. Keep Riders Off Attachment
• 1.3.6. Avoid Machine Tip Over
• 1.3.7. Add and Operate Attachments Safely
• 1.3.8. Use Special Care When Operating
• 1.3.9. Inspect and Maintain Demolition Guard
• 1.4. SafetyMaintenance Precautions
• 1.4.1. Remove Paint Before Welding or Heating
• 1.4.2. Make Welding Repairs Safely
• 1.4.3. Drive Metal Pins Safely
• 1.4.4. Practice Safe Maintenance
• 1.5. SafetySafety Signs and Other Instructions
• 1.5.1. Safety Signs and Other Instructions
• 1.6. OperationPreparing Machine
• 1.6.1. Machine Preparation
• 1.6.2. Requirements for CP18D, CP24D, and CP30D Installations Only
• 1.7. OperationInstall And Remove Attachment
• 1.7.1. Using Attachment Mounting SystemQuikTatch
• 1.7.2. Auxiliary Hydraulic Pressure Release
• 1.7.3. Attaching Standard Flow Attachment to High Flow Machine
• 1.7.4. Attaching Hydraulic Hoses and Electrical Connector
• 1.7.5. Attaching Water Spray SystemIf Equipped
• 1.7.6. Removing Cold Planer
• 1.8. OperationOperating Attachment
• 1.8.1. Operating Tips
• 1.8.2. Rotating Cold Planer Drum for Forward Travel
• 1.8.3. Tilting the Cold PlanerCP12D Only
• 1.8.4. SideShifting Cold PlanerCP12D Only
• 1.8.5. Adjusting Cold Planer DepthCP12D Only
• 1.8.6. Operating Cold PlanerCP12D Only
• 1.8.7. EightButton Control Handle Functions(300Series Manual Controls) CP18D, CP24D, and CP30D
• 1.8.8. Tilting the Cold Planer(300Series Manual Controls) CP18D, CP24D, and CP30D
• 1.8.9. SideShifting Cold Planer(300Series Manual Controls) CP18D, CP24D, and CP30D
• 1.8.10. Adjusting Cold Planer Depth(300Series Manual Controls) CP18D, CP24D, and CP30D
• 1.8.11. Attachment Control Handle Functions(DSeries and ESeries Machines) CP18D, CP24D, and CP30D
• 1.8.12. Tilting the Cold Planer(DSeries and ESeries Machines) CP18D, CP24D, and CP30D
• 1.8.13. SideShifting Cold Planer(DSeries and ESeries Machines) CP18D, CP24D, and CP30D
• 1.8.14. Adjusting Cold Planer Depth(DSeries and ESeries Machines) CP18D, CP24D, and CP30D
• 1.8.15. Operating Cold PlanerCP18D, CP24D, and CP30D
• 1.8.16. Special Applications
• 1.9. MaintenanceAttachment
• 1.9.1. Gear Oil
• 1.9.2. MaintenanceEvery 10 Hours or Daily
• 1.9.3. MaintenanceEvery 40 Hours
• 1.9.4. MaintenanceInitial Service 1500 Hours or 8 Months
• 1.9.5. MaintenanceEvery 2500 Hours or 12 Months
• 1.9.6. Lubricate Grease Fittings
• 1.9.7. Unified Inch Bolt and Screw Torque Values
• 1.9.8. Metric Bolt and Screw Torque Values
• 1.10. MaintenanceMiscellaneous
• 1.10.1. Replacing Picks
• 1.10.2. Welding on Machine
• 1.11. MiscellaneousTroubleshooting
• 1.11.1. Using Troubleshooting Chart
• 1.11.2. Cold Planer Attachment
• 1.12. MiscellaneousStorage
• 1.12.1. Prepare Attachment for Storage
• 1.12.2. Remove Attachment From Storage
• 1.13. MiscellaneousAttachment Numbers
• 1.13.1. Record Product Identification Number (PIN)
• 1.14. MiscellaneousSpecifications
• 1.14.1. Cold Planer Specifications
• 1.14.2. CP12D Cold Planer Attachment Dimensions
• 1.14.3. CP18D, CP24D, and CP30D Cold Planer Attachment Dimensions
• 1.14.4. Attachment Compatibility
• 2. Page Number
• 2.1. Section 11
• 2.2. Section 12
• 2.3. Section 13
• 2.4. Section 14
• 2.5. Section 15
• 2.6. Section 21
• 2.7. Section 22
• 2.8. Section 23
• 2.9. Section 31
• 2.10. Section 32
• 2.11. Section 41
• 2.12. Section 42
• 2.13. Section 43
• 2.14. Section 44