John Deere FR27 Disc Saw Felling Head Operator Manual OMT482400X019

Description

• Model List:
  • FR27 Disc Saw Felling Head

• 1. Contents
• 1.1. SafetySafety and Operator Convenience Features
• 1.1.1. Safety and Operator Convenience Features
• 1.2. SafetyGeneral Precautions
• 1.2.1. Recognize Safety Information
• 1.2.2. Follow Safety Instructions
• 1.2.3. Operate Only If Qualified
• 1.2.4. Wear Protective Equipment
• 1.2.5. Protect Against Noise
• 1.2.6. Avoid Unauthorized Attachment Modifications
• 1.2.7. Protect Against Flying Debris
• 1.2.8. Inspect Attachment
• 1.2.9. Stay Clear of Moving Parts
• 1.2.10. Avoid HighPressure Oils
• 1.2.11. Decommissioning Proper Recycling and Disposal of Fluids and Components
• 1.2.12. Add Cab Guarding for Special Uses
• 1.3. SafetyOperating Precautions
• 1.3.1. Use Steps and Handholds Correctly
• 1.3.2. Start Only From Operators Seat
• 1.3.3. Prevent Unintended Machine Movement
• 1.3.4. Avoid Work Site Hazards
• 1.3.5. Keep Riders Off Attachment
• 1.3.6. Avoid Machine Tip Over
• 1.3.7. Add and Operate Attachments Safely
• 1.3.8. Use Special Care When Operating
• 1.4. SafetyMaintenance Precautions
• 1.4.1. Park And Prepare For Service Safely
• 1.4.2. Remove Paint Before Welding or Heating
• 1.4.3. Make Welding Repairs Safely
• 1.4.4. Drive Metal Pins Safely
• 1.4.5. Practice Safe Maintenance
• 1.4.6. Use Proper Lifting Equipment
• 1.5. SafetySafety Signs and Other Instructions
• 1.5.1. Safety Signs and Other Instructions
• 1.6. OperationPreparing Machine
• 1.6.1. FR27 Felling Head Components
• 1.7. OperationInstall and Remove Attachment
• 1.7.1. FR27 Saw Drive Components
• 1.7.2. Saw Drive Description
• 1.7.3. Install and Remove Felling Head
• 1.8. OperationOperating Attachment
• 1.8.1. Operator Ability
• 1.8.2. Basic Operation
• 1.8.3. Principle of Operation
• 1.8.4. Speed of Blade Feed
• 1.8.5. General Method of Operation
• 1.8.6. Stop the Saw Blade
• 1.8.7. Cutting Multiple Trees
• 1.8.8. Handle and Control The Tree
• 1.8.9. Secondary Exhaust
• 1.9. MaintenanceAttachment
• 1.9.1. Prepare Felling Head for Maintenance
• 1.9.2. Maintenance Schedule
• 1.9.3. Unified Inch Bolt and Screw Torque Values
• 1.9.4. Metric Bolt and Screw Torque Values
• 1.10. MaintenanceMiscellaneous
• 1.10.1. Locking Cap Screw Storage
• 1.10.2. Saw Tooth Replacement
• 1.10.3. Inspect Felling Head Frame and Cover Plate
• 1.10.4. Disc Saw Blade Gauge
• 1.11. MaintenanceEvery 8 Hours
• 1.11.1. Visually Inspect All Bolts and Covers
• 1.11.2. Check Saw Housing for Restriction
• 1.11.3. Check All Hydraulic Hoses and Fittings
• 1.11.4. Lubricate All Grease Fittings
• 1.11.5. Check Saw Tooth Cap Screw Torque
• 1.11.6. Check Saw Tooth Condition
• 1.11.7. Check Disc Saw Blade Condition
• 1.11.8. Check Driveshaft End Play
• 1.12. MaintenanceInitial 100 Hours
• 1.12.1. Drain and Refill Wrist Gear Case Oil
• 1.13. MaintenanceEvery 100 Hours
• 1.13.1. Check All Hydraulic Hoses and Fittings
• 1.13.2. Lubricate Driveshaft Motor Coupling
• 1.13.3. Clean Saw Motor Area
• 1.13.4. Check Wrist Gear Case Oil Level
• 1.13.5. Clean Lubrication Vent
• 1.14. MaintenanceInitial 250 Hours
• 1.14.1. Drain and Refill Wrist Gear Case Oil
• 1.15. MaintenanceEvery 1000 Hours
• 1.15.1. Drain and Refill Wrist Gear Case Oil
• 1.16. Operational Checkout
• 1.16.1. Operational Checkout
• 1.16.1.1. Carrier Ignition Off Checks
• 1.16.1.2. Carrier Ignition On, Engine On Checks
• 1.17. MiscellaneousTroubleshooting
• 1.17.1. Using Troubleshooting Chart
• 1.17.2. Troubleshooting Procedure
• 1.18. MiscellaneousStorage
• 1.18.1. Prepare Attachment for Storage
• 1.18.2. Remove Attachment From Storage
• 1.19. MiscellaneousAttachment Number(s)
• 1.19.1. Record Product Identification Number (PIN)
• 1.19.2. Record Saw Blade Product Identification Number (PIN)
• 1.19.3. Record Hydraulic Motor Serial Number
• 1.20. MiscellaneousSpecifications
• 1.20.1. Felling Head Specifications
• 1.20.2. Disc Saw Blade and Tooth Data
• 2. Page Number
• 2.1. Section 11
• 2.2. Section 12
• 2.3. Section 13
• 2.4. Section 14
• 2.5. Section 15
• 2.6. Section 21
• 2.7. Section 22
• 2.8. Section 23
• 2.9. Section 31
• 2.10. Section 32
• 2.11. Section 33
• 2.12. Section 34
• 2.13. Section 35
• 2.14. Section 36
• 2.15. Section 37
• 2.16. Section 41
• 2.17. Section 42
• 2.18. Section 43
• 2.19. Section 44
• 2.20. Section 45