Description
-
Model List:
- H120 Loader
- 1. Contents
- 1.0.1. Recognize Safety Information
- 1.0.2. Understand Signal Words
- 1.0.3. Follow Safety Instructions
- 1.0.4. Prepare for Emergencies
- 1.0.5. Wear Protective Clothing
- 1.0.6. Park Machine Safely
- 1.0.7. Protect People and Animals
- 1.0.8. Operating the Loader Tractor Safely
- 1.0.9. Use Seat Belt Properly
- 1.0.10. Use Foldable ROPS and Seat Belt Properly
- 1.0.11. Use Caution On Slopes and Uneven Terrain
- 1.0.12. Avoid Injury or Death from Falling Loads
- 1.0.13. Carry Materials Safely
- 1.0.14. Driving on Public Roads
- 1.0.15. Operating Loader with Attachments from Other Manufacturers
- 1.0.16. Operate Bucket/Attachment Safely
- 1.0.17. Operating NonSelfLevelling Loaders
- 1.0.18. Avoid Power Lines
- 1.0.19. Dig Safely
- 1.0.20. Detach Loader Safely
- 1.0.21. Use Safety Lights and Devices
- 1.0.22. Practice Safe Maintenance
- 1.0.23. Service Loader Safely
- 1.0.24. Service Machines Safely
- 1.0.25. Service Accumulator Systems Safely
- 1.0.26. Avoid Heating Near Pressurized Fluid Lines
- 1.0.27. Check Hoses for Damage
- 1.0.28. Avoid HighPressure Fluids
- 1.0.29. Remove Paint Before Welding or Heating
- 1.0.30. Decommissioning Proper Recycling and Disposal of Fluids and Components
- 1.1. Safety Signs
- 1.1.1. Replace Safety Signs
- 1.1.2. Avoid HighPressure Spray on Safety Decals
- 1.1.3. Safety Sign Locations
- 1.2. Preparing the Tractor
- 1.2.1. Rated Operating Load
- 1.2.2. Approved Tractors
- 1.2.3. Using RollOver Protective Structure (ROPS)
- 1.2.4. Keep ROPS Installed Properly
- 1.2.5. Remove Front Weights
- 1.2.6. Approved Tires and Ballast for 1023E, 1025R, and 1026R Tractors
- 1.2.7. Adding Ballast to Rear Wheels
- 1.2.8. Inflating Front Tires
- 1.2.9. Set Tread Width
- 1.2.10. Check Front Wheel Hardware
- 1.2.11. Installing Hitch Pin Bushings on Ballast Box for Category 1 Quick Coupler Hitch
- 1.2.12. Attach Ballast Box to Tractor with ThreePoint Hitch
- 1.2.13. Attach Ballast Box to Tractor with Quick Coupler Hitch
- 1.2.14. Adding Ballast to 3Point Hitch
- 1.3. Detaching Loader
- 1.3.1. Remove Ballast Box
- 1.3.2. Detach Loader
- 1.4. Attaching Loader
- 1.4.1. Attach Loader
- 1.4.2. Check Loader Operation
- 1.5. Transporting
- 1.5.1. Carrying Loads
- 1.5.2. Keep Riders Off Machine
- 1.5.3. Driving on Public Roads
- 1.6. Operating Loader
- 1.6.1. PreOperational Inspection
- 1.6.2. Using Ballast Box
- 1.6.3. Avoid Rollover Accidents
- 1.6.4. Do Not Handle Round or Large Square Bales
- 1.6.5. Loader Controls
- 1.6.6. Using Bucket Level Indicator
- 1.6.7. Leveling and Scraping Forward
- 1.6.8. Leveling in Reverse
- 1.6.9. Carrying Material
- 1.6.10. Removing Material from a Pile
- 1.6.11. Loading Operations
- 1.6.12. Using Service Locks
- 1.6.13. AntiSpill System
- 1.6.14. Digging
- 1.6.15. Backfilling
- 1.6.16. Attach and Detach QuikChange Attachments
- 1.6.17. Attach and Detach PinOn Bucket (If Equipped)
- 1.6.18. Attachments Available
- 1.7. Lubrication and Maintenance
- 1.7.1. Lubricate and Maintain Loader Safely
- 1.7.2. Perform Lubrication and Maintenance
- 1.7.3. Observe Lubrication Symbols
- 1.7.4. Alternative and Synthetic Lubricants
- 1.7.5. Every 10 Hours
- 1.7.6. Every 50 Hours
- 1.8. Service
- 1.8.1. Servicing Loader or Tractor Safely (Loader Attached)
- 1.8.2. Work in Clean Area
- 1.8.3. Avoid HighPressure Fluids
- 1.8.4. Oring Installation
- 1.8.5. Tightening Procedure for Fittings
- 1.8.6. Identify Hose Connections
- 1.8.7. Replace Orifice
- 1.8.8. Check and Adjust AntiSpill System Switches
- 1.8.9. Metric Bolt and Screw Torque Values
- 1.8.10. Unified Inch Bolt and Screw Torque Values
- 1.9. Specifications
- 1.9.1. H120 Loader Specifications on 1023E and 1026R Tractors
- 1.10. John Deere Service Keeps You On The Job
- 1.10.1. John Deere Parts
- 1.10.2. The Right Tools
- 1.10.3. WellTrained Technicians
- 1.10.4. Prompt Service
- 2. Page Number
- 2.1. Section 05
- 2.2. Section 10
- 2.3. Section 15
- 2.4. Section 20
- 2.5. Section 25
- 2.6. Section 30
- 2.7. Section 35
- 2.8. Section 40
- 2.9. Section 45
- 2.10. Section 50
