Description
-
Model List:
- 1910G Final Tier 4 CTL Forwarder
- 1. Table of Contents
- 2. Foreword
- 2.1. Copyright
- 2.2. Foreword
- 2.3. California Proposition 65 Warning
- 2.4. Declaration of conformity
- 2.5. Nonroad emissions control warranty statement
- 2.6. Emissions control warranty statement 2019 through 2021
- 2.7. Emissions Performance and Tampering
- 2.8. John Deere Forwarder
- 2.9. Brochure
- 2.10. Machine identification
- 2.11. Engine Identification
- 2.12. Emissions control system certification label
- 2.13. Follow Laws and Regulations
- 2.14. Operating
- 2.15. Maintenance
- 2.16. Safety Decal Locations
- 3. Warranty
- 3.1. Standard Warranty Clauses
- 3.2. Standard Warranty
- 3.3. Extended Coverage
- 3.4. First 250 hours maintenance
- 3.5. Periodic Maintenance
- 4. Machine systems and components
- 4.1. Main switch panel
- 4.2. Power outlets
- 4.3. Antiskid surfaces, handles and steps
- 4.4. Rotating and leveling cabin
- 4.5. Final Tier 4 engines
- 4.6. Tracks, antislip chains and wheel ballasting
- 4.7. Optional equipment
- 5. Controls
- 5.1. Driving controls
- 5.2. Left keypad in forwarder
- 5.3. Right keypad in forwarder
- 5.4. Extra keypad
- 5.5. Lights and wipers
- 5.6. Central locking system
- 5.7. Air Conditioner
- 5.8. Preheater EasyStart timer control panel
- 5.9. Preheater modem
- 6. Operating the machine
- 6.1. Driving
- 6.2. Boom and grapple
- 6.3. At the End of the Work Day
- 7. General maintenance
- 7.1. Cabin windows cleaning and inspection
- 7.2. Cabin interior cleaning and surface sanitation
- 7.3. Refueling the machine
- 7.4. Refilling the diesel exhaust fluid (DEF) tank
- 7.5. Fluids and lubricants
- 7.6. Welding instructions
- 7.7. Electrical components
- 7.8. Hydraulic pressure measurements
- 7.9. Hydraulic oil sampling valve
- 7.10. Vacuum pump
- 7.11. Frame and boom service positions
- 7.12. Changing wheels
- 7.13. Antislip chain fitting
- 7.14. Tracks fitting 1/4
- 8. Periodic maintenance
- 8.1. Introduction
- 8.2. Optional equipment maintenance
- 8.3. Every 10 Hours or Daily
- 8.4. Every 50 Hours or Weekly
- 8.5. Every 250 hours
- 8.6. Every 500 hours
- 8.7. Every 1000 hours
- 8.8. Every 2000 hours
- 8.9. As required
- 9. Transporting, towing and storing
- 9.1. Transporting the Machine
- 9.2. Tiedown and lifting points
- 9.3. Towing the machine
- 9.4. Stowing a disabled boom
- 9.5. Preparing machine for storage
- 9.6. After storage
- 10. Environment, recycling and postuse
- 11. Attachments
- 11.1. Declaration of Conformity template_en
- 11.2. _brochure_en
- 11.3. a08020_F_GAS_DOC_en
- 11.4. a03420_Forwarder_arm_silicon
- 11.5. a08047_LSpressures_G_Forw_en
- 11.6. UMP_1910G_FT4_ATS_EN
- 11.7. Nokian_Heavy_Tyres_Pressure_Handbook_John_Deere
