John Deere TX Turf Gator Utility Vehicle Operator Manual OMM176111

Description

• Model List:
  • TX Turf Gator Utility Vehicle

• 1. Introduction
• 1.1. Thank You for Purchasing a John Deere Product
• 1.2. Using Your Operators Manual
• 1.3. Special Messages
• 1.4. Attachments for Your Machine
• 2. Contents
• 3. Product Identification
• 3.1. Record Identification Numbers
• 4. Safety Labels Text
• 4.1. Safety Label Location
• 4.2. Understanding The Machine Safety Labels
• 4.2.1. French or Spanish Safety Labels and Operators Manual
• 4.3. CAUTION
• 4.4. CAUTION
• 4.4.1. HELP PREVENT INJURY WHEN DUMPING LOADS
• 4.5. WARNING
• 4.5.1. YOUNG DRIVERS INCREASE CHANCE OF DEATH
• 4.6. CAUTION
• 4.6.1. BEFORE LEAVING VEHICLE
• 4.7. WARNING
• 4.7.1. ROLLOVER OR FALLING OFF MAY CAUSE DEATH
• 4.8. WARNING
• 4.8.1. AVOID INJURY FROM EXPLOSION
• 4.8.2. RIDERS CAN FALL OFF AND BE KILLED
• 5. Safety Labels NoText
• 5.1. Safety Label Location
• 5.2. Understanding The NoText Machine Safety Labels
• 5.3. Avoid Injury From Explosion
• 5.4. Young Drivers Increase Chance of Death
• 5.5. Rollover or Falling Off May Cause Death
• 5.6. Avoid Injury From Explosion or Riders Falling Off
• 5.7. Drawbar Load
• 5.8. Prevent Equipment Fires
• 5.9. Operating Safely
• 5.10. Parking Safely
• 5.11. Protect Children/Small Adults and Prevent Accidents
• 5.12. Avoid Excessive Speeds
• 5.13. Vibration
• 5.14. Avoid Tipping
• 5.15. Keep Riders Off Vehicle
• 5.16. Using Front Attachments
• 5.17. Transport Loads Safely
• 5.18. Towing Loads Safely With Utility Vehicle
• 5.19. Before Driving
• 5.20. Driving On Rough Terrain
• 5.21. Climbing Or Descending A Hill
• 5.22. Driving Across Slopes
• 5.23. Riding Through Water
• 5.24. Checking Wheel Hardware
• 5.25. Wear Appropriate Clothing
• 5.26. Practice Safe Maintenance
• 5.27. Prevent Fires
• 5.28. Do Not Modify Machine
• 5.29. Tire Safety
• 5.30. Handling Fuel Safely
• 5.31. Handle Agricultural Chemical Safely
• 5.32. Handling Waste Product and Chemicals
• 5.33. Use Electronic Display Properly
• 6. Machine Cleanout
• 6.1. Cleanout Areas
• 7. Operating Controls
• 7.1. Operator Station Controls
• 8. Operating
• 8.1. Daily Operating Checklist
• 8.2. Avoid Damage to Plastic and Painted Surfaces
• 8.3. Using Hand Holds
• 8.4. Adjusting Standard Seat
• 8.5. Adjusting Driver Seat With Optional Lever System
• 8.6. Testing Safety Systems
• 8.7. Testing Engine Starting System
• 8.7.1. First Test
• 8.7.2. Second Test
• 8.8. Testing Backup Alarm
• 8.9. Using Park Brake
• 8.9.1. Locking the Park Brake
• 8.9.2. Unlocking the Park Brake
• 8.10. Using Key Switch
• 8.11. Using Headlights
• 8.12. Using Instrument Panel
• 8.13. Using Accessory Outlet
• 8.14. Using Optional Turn Signal Switch
• 8.15. Using Optional Hazard Lights
• 8.16. Starting the Engine
• 8.17. Stopping Engine
• 8.18. Emergency Stopping
• 8.19. Running Engine in Neutral
• 8.20. Using Travel Controls
• 8.21. Using the Cargo Box
• 8.21.1. Raising and Lowering with Manual Lift (Machines Without Cabs)
• 8.21.2. Raising and Lowering with Manual Lift (Machines with Cab)
• 8.21.3. Raising and Lowering with Power Lift
• 8.21.4. Locking Box in Raised Position
• 8.21.5. Operating the Tailgate
• 8.21.6. Using Cargo Box Tie Downs
• 8.22. Loading the Cargo Box
• 8.23. Emptying Cargo Box
• 8.24. Towing Loads
• 8.24.1. Capacity Label
• 8.25. Using Correct Tires and Inflation
• 8.25.1. Inflation
• 8.26. Using Tire Chains
• 8.27. Transporting Machine
• 8.27.1. Towing the Vehicle
• 8.27.2. Vehicle Tie Down Locations
• 8.27.3. Hauling the Vehicle
• 9. Optional Attachments Kits
• 9.1. Cab Classification According to EN156951 (for Application of Crop Protection Chemicals and Liquid Fertilizer)
• 9.2. Cab Heater
• 9.3. Using a Trailer
• 10. Replacement Parts
• 10.1. Service Literature
• 10.1.1. Order Service Parts Online
• 11. Service Intervals
• 11.1. Servicing Your Machine
• 11.2. Break In
• 11.2.1. After First 8 Hours
• 11.3. Every 50 Hours
• 11.4. Every 100 Hours or Annually (whichever comes first)
• 11.5. Every 200 Hours
• 11.6. Every 200 Hours or Annually (whichever comes first)
• 11.7. Every 800 Hours or 24 Months
• 11.8. Every 1000 Hours or 24 Months (whichever comes first)
• 12. Service Lubrication
• 12.1. Lubricating Front Spindles
• 12.2. Lubricating Cargo Box Tailgate Strikers
• 13. Service Engine
• 13.1. Emissions Service Information
• 13.1.1. Emission Control System Certification Label
• 13.1.2. Altitude Adjustment (Gasoline Engines Only)
• 13.2. Avoid Fumes
• 13.3. Engine Oil
• 13.4. Checking Engine Oil Level
• 13.5. Changing Engine Oil and Filter
• 13.6. Cleaning Dust Unloading Valve
• 13.7. Servicing Air Cleaner Element
• 13.8. Checking Air Intake, Hoses and Clamps
• 13.9. Checking Spark Plug
• 13.10. Replacing Fuel Filter
• 13.11. Cleaning Engine Compartment
• 13.12. Cleaning Frame Screen
• 13.13. Checking and Adjusting Starter (Generator) Belt
• 13.14. Replacing Starter (Generator) Belt
• 14. Service Transmission
• 14.1. Transaxle Oil
• 14.2. Checking Transaxle Oil Level
• 14.3. Changing Transaxle Oil
• 14.4. Replacing Drive Belt
• 14.5. Checking Secondary Driven Clutch Buttons
• 15. Service Steering Brakes
• 15.1. Brake Fluid
• 15.2. Check Brake Fluid Level
• 15.3. Checking Brake Pads
• 15.4. Checking Brake Lines
• 15.5. Adjusting Park Brake
• 16. Service Electrical
• 16.1. Electrical
• 16.2. Service the Battery Safely
• 16.3. Checking the Battery (Sealed Batteries)
• 16.4. Removing and Installing Battery
• 16.4.1. Removing
• 16.4.2. Installing
• 16.5. Cleaning Battery and Terminals
• 16.6. Using Booster Battery
• 16.7. Replacing Headlight Bulb
• 16.8. Replacing Instrument Panel Bulbs
• 16.9. Checking and Replacing Fuses
• 17. Service Miscellaneous
• 17.1. Using Proper Fuel and Stabilizer
• 17.2. Filling Fuel Tank
• 17.3. Lifting Machine
• 17.3.1. Lifting Rear
• 17.3.2. Lifting Front
• 17.4. Removing and Installing Wheel
• 17.4.1. Removing
• 17.4.2. Installing
• 17.5. Removing and Installing Hood
• 17.5.1. Removing Hood
• 17.5.2. Installing Hood
• 17.6. Replacing Cargo Box Tailgate Bushings
• 17.7. Opening and Closing Service Access Panel
• 17.8. Cleaning and Repairing Cargo Box
• 17.8.1. Repairing Accessory Tubes
• 17.8.2. Cargo Box Floor
• 17.9. Cleaning Plastic Hood and Body Panel Surfaces
• 17.10. Cleaning and Repairing Metal Surfaces
• 17.10.1. Cleaning
• 17.10.2. Repairing Minor Scratches (surface scratch)
• 17.10.3. Repairing Deep Scratches (bare metal or primer showing)
• 18. Troubleshooting
• 18.1. Using Troubleshooting Chart
• 18.2. Electrical
• 18.3. Cargo Box
• 19. Storage
• 19.1. Storing Safety
• 19.2. Preparing Machine for Storage
• 19.3. Preparing Fuel and Engine For Storage
• 19.3.1. Engine
• 19.4. Removing Machine From Storage
• 20. Specifications
• 20.1. Drivetrain and Travel Speeds
• 20.2. Electrical System
• 20.3. Fuel System
• 20.4. Steering and Brakes
• 20.5. Capacities
• 20.6. Dimensions
• 20.7. Weights
• 20.8. Recommended Fluids and Lubricants
• 21. Warranty
• 21.1. Product Warranty
• 21.1.1. United States
• 21.2. California and U.S. EPA Emissions Control System Warranty Statement (OffRoad Gas Engines)
• 21.2.1. Your Warranty Rights and Obligations
• 21.2.2. Manufacturers Warranty Coverage
• 21.2.3. Owners Warranty Responsibilities
• 21.2.4. General Emissions Warranty Coverage
• 21.2.5. Emissions Warranty Interpretation
• 21.2.6. Emission Warranty Parts List
• 21.2.7. Limited Liability
• 21.3. Tire Warranty
• 21.4. Limited Battery Warranty For Factory Installed Batteries
• 21.4.1. FREE REPLACEMENT PERIOD
• 21.4.2. PRO RATA ADJUSTMENT (batteries with letter code identification only)
• 21.4.3. THIS WARRANTY DOES NOT COVER
• 21.4.4. LIMITATION OF IMPLIED WARRANTIES AND PURCHASERS REMEDIES
• 21.4.5. NO DEALER WARRANTY
• 21.4.6. WARRANTY TERMS TABLE
• 22. John Deere Quality Statement
• 22.1. John Deere Quality
• 23. Service Record
• 23.1. Record Service Dates