Description
-
Model List:
- CL 20 AC
- 1. OPERATING AND SAFETY INSTRUCTIONS
- 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1.1. THE SITE
- 1.1.2. THE OPERATOR
- 1.1.3. THE ORDER PICKER
- 1.1.3.1. A SUITABILITY OF THE ORDER PICKER FOR THE TASK
- 1.1.3.2. B ADAPTATION OF THE ORDER PICKER TO STANDARD ENVIRONMENTAL CONDITIONS
- 1.1.3.3. C ORDER PICKER MODIFICATION
- 1.1.4. INSTRUCTIONS
- 1.1.5. MAINTENANCE
- 1.2. INSTRUCTIONS FOR THE OPERATOR
- 1.2.1. FOREWORD
- 1.2.2. GENERAL INSTRUCTIONS
- 1.2.2.1. A OPERATORS MANUAL
- 1.2.2.2. B AUTHORISATION FOR USE
- 1.2.2.3. C MAINTENANCE
- 1.2.2.4. D MODIFYING THE ORDER PICKER
- 1.2.2.5. E DIRECTION OF TRAVEL
- 1.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
- 1.2.3.1. A PRIOR TO USING THE ORDER PICKER
- 1.2.3.2. B DRIVERS OPERATING INSTRUCTIONS
- 1.2.3.3. C ENVIRONMENT
- 1.2.3.4. D VISIBILITY
- 1.2.3.5. E SWITCHING ON THE ORDER PICKER
- 1.2.3.6. F DRIVING THE ORDER PICKER
- 1.2.3.7. G STOPPING THE ORDER PICKER
- 1.2.3.8. H BATTERY CHARGE
- 1.2.4. INSTRUCTIONS FOR HANDLING A LOAD
- 1.2.4.1. A WEIGHT OF LOAD AND CENTER OF GRAVITY
- 1.2.4.2. B PICKING UP A LOAD ON THE GROUND
- 1.3. ORDER PICKER MAINTENANCE INSTRUCTIONS
- 1.3.1. GENERAL INSTRUCTIONS
- 1.3.2. MAINTENANCE
- 1.3.3. LUBRICANT LEVELS
- 1.3.4. HYDRAULIC SYSTEM
- 1.3.5. ELECTRICITY
- 1.3.6. CLEANING THE ORDER PICKER
- 1.4. IF THE ORDER PICKER IS NOT TO BE USED FOR A LONG TIME
- 1.4.1. INTRODUCTION
- 1.4.2. PREPARING THE ORDER PICKER
- 1.4.3. PROTECTING THE ORDER PICKER
- 1.4.4. RETURNING THE ORDER PICKER TO SERVICE
- 1.5. REMOVING THE ORDER PICKER FROM SERVICE
- 1.5.1. REMOVAL FROM SERVICE
- 1.6. ORDER PICKER DISPOSAL
- 1.6.1. RECYCLING OF MATERIALS
- 1.6.1.1. METALS
- 1.6.1.2. PLASTICS
- 1.6.1.3. RUBBER
- 1.6.1.4. GLASS
- 1.6.2. ENVIRONMENTAL PROTECTION
- 1.6.2.1. WORN OR DAMAGED PARTS
- 1.6.2.2. USED OIL
- 1.6.2.3. USED BATTERIES
- 2. DESCRIPTION
- 2.1. CE DECLARATION OF CONFORMITY
- 2.2. SAFETY PLATES AND STICKERS
- 2.3. ORDER PICKER IDENTIFICATION
- 2.4. CHARACTERISTICS
- 2.5. INSTRUMENTS AND CONTROLS
- 2.5.1. HOOP
- 2.5.2. SLINGING POINTS
- 2.5.3. TILLER ARM
- 2.5.4. DASHBOARD
- 2.5.5. KEY SWITCH
- 2.5.6. MULTIFUNCTION DISPLAY
- 2.5.7. EMERGENCY STOP
- 2.5.8. DRIVE UNIT
- 2.5.9. STABILIZER WHEEL
- 2.5.10. BATTERY COMPARTMENT
- 2.5.11. BATTERY COMPARTMENT LEVER
- 2.5.12. EXTERNAL CHARGER CONNECTOR
- 2.5.13. BATTERY
- 2.5.14. ROLLER
- 2.5.15. FORK
- 2.5.16. HYDRAULIC CYLINDER
- 2.5.17. PROTECTIVE SCREEN
- 2.5.18. PADDING
- 2.5.19. LOWER BUTTON
- 2.5.20. RAISE BUTTON
- 2.5.21. CRAWL SPEED (TORTOISE) BUTTON
- 2.5.22. HORN BUTTON
- 2.5.23. BUTTERFLY CONTROL SWITCHES
- 2.5.24. EMERGENCY BRAKE
- 2.5.25. OFFSET CONTROLS (OPTIONS)
- 2.5.26. HYDRAULIC UNIT
- 2.5.27. ELECTRONIC SPEED CONTROLLER
- 2.5.28. FUSES
- 2.5.29. ELECTRIC STEERING ELECTRONIC CONTROL UNIT
- 2.5.30. ELECTRIC STEERING FUSE
- 2.5.31. FANS
- 2.5.32. WARNING ALARM
- 2.5.33. MOTOR COVER PANEL
- 3. MAINTENANCE
- 3.1. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 3.2. FILTER ELEMENTS
- 3.3. LUBRICANTS
- 3.4. SERVICING SCHEDULE
- 3.5. A DAILY OR EVERY 10 HOURS OF SERVICE
- 3.6. B WEEKLY OR OU EVERY 50 HOURS OF SERVICE
- 3.7. C EVERY 3 MONTHS OR EVERY 250 HOURS OF SERVICE
- 3.8. D EVERY 6 MONTHS OR EVERY 500 HOURS OF SERVICE
- 3.9. E YEARLY OR OU EVERY 1000 HOURS OF SERVICE
- 3.10. F OCCASIONAL MAINTENANCE
