Description
-
Model List:
- MAN GO 12 US
- 1. OPERATING AND SAFETY INSTRUCTIONS
- 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1.1. PREAMBLE
- 1.1.2. THE SITE
- 1.1.3. THE OPERATOR
- 1.1.4. THE PLATFORM
- 1.1.5. THE INSTRUCTIONS
- 1.1.6. THE MAINTENANCE
- 1.2. INSTRUCTIONS FOR THE OPERATOR
- 1.2.1. PREAMBLE
- 1.2.2. GENERAL INSTRUCTIONS
- 1.2.2.1. A OPERATORS MANUAL
- 1.2.2.2. B AUTHORISATION FOR USE IN FRANCE
- 1.2.2.3. C MAINTENANCE
- 1.2.2.4. D MODIFYING THE PLATFORM
- 1.2.2.5. E IC PLATFORM AXLES
- 1.2.3. DRIVING INSTRUCTIONS
- 1.2.3.1. A bEFORE STARTING THE PLATFORM
- 1.2.3.2. B DRIVERS OPERATING INSTRUCTIONS
- 1.2.3.3. C ENVIRONMENT
- 1.2.3.4. D VISIBILITY
- 1.2.3.5. E STARTING THE PLATFORM
- 1.2.3.6. F DRIVING THE PLATFORM
- 1.2.3.7. G STOPPING THE PLATFORM
- 1.2.4. INSTRUCTIONS FOR WELDING AND BLOW TORCH WORK ON THE EXTERNAL STRUCTURE
- 1.2.4.1. A WITH ELECTRIC WELDING EQUIPMENT
- 1.2.4.2. B WITH A BLOW TORCH
- 1.3. PLATFORM MAINTENANCE INSTRUCTIONS
- 1.3.1. GENERAL INSTRUCTIONS
- 1.3.2. MAINTENANCE
- 1.3.3. LUBRICANT AND FUEL LEVELS
- 1.3.4. LEVEL OF ELECTROLYTE IN THE BATTERY
- 1.3.5. HYDRAULIC
- 1.3.6. ELECTRICITY
- 1.3.7. WELDING ON THE ACCESS PLATFORM
- 1.3.8. WASHING THE PLATFORM
- 1.4. IF THE PLATFORM IS NOT TO BE USED FOR A LONG TIME
- 1.4.1. INTRODUCTION
- 1.4.2. PREPARING THE PLATFORM
- 1.4.3. PROTECTING THE I.C. ENGINE
- 1.4.4. CHARGING THE BATTERIES
- 1.4.5. PROTECTING THE PLATFORM
- 1.4.6. BRINGING THE PLATFORM BACK INTO SERVICE
- 1.5. SCRAPPING THE PLATFORM
- 1.5.1. RECYCLING OF MATERIALS
- 1.5.1.1. METALS
- 1.5.1.2. PLASTICS
- 1.5.1.3. RUBBER
- 1.5.1.4. GLASS
- 1.5.2. ENVIRONMENTAL PROTECTION
- 1.5.2.1. WORN OR DAMAGED PARTS
- 1.5.2.2. USED OIL
- 1.5.2.3. USED BATTERIES
- 2. DESCRIPTION
- 2.1. ADHESIVE AND SAFETY LABELS
- 2.2. LIFTING PLATFORM ID
- 2.3. CHARACTERISTICS
- 2.4. DIMENSIONS
- 2.5. LIFTING PLATFORM OPERATION
- 2.6. BASE CONTROL INSTRUMENTATION
- 2.7. BASKET CONTROL INSTRUMENTATION
- 2.8. GROUND MAINTENANCE AND EMERGENCY STATION
- 2.9. BASKET CONTROL STATION
- 2.10. SCREEN DISPLAY DESCRIPTION OF THE PAGES
- 2.11. DESCRIPTION OF THE SUBMENUS
- 2.12. USING THE LIFTING PLATFORM
- 2.13. RESCUE PROCEDURE
- 2.14. DESCRIPTION AND USE OF THE OPTIONS
- 3. MAINTENANCE
- 3.1. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 3.2. FILTERS CARTRIDGES AND BELTS
- 3.3. LUBRICANTS AND FUEL
- 3.4. MAINTENANCE TABLE
- 3.5. A DAILY OR EVERY 10 HOURS OF OPERATION
- 3.6. B EVERY 50 HOURS OF OPERATION
- 3.7. C EVERY 250 HOURS OF OPERATION
- 3.8. D EVERY 500 HOURS OF OPERATION
- 3.9. E EVERY 1000 HOURS OF OPERATION
- 3.10. F EVERY 2000 HOURS OF OPERATION OR TWO YEARS
- 3.11. G OCCASIONAL MAINTENANCE
