Description
-
Model List:
- MI 20 D K ST5 S1
- MI 25 D K ST5 S1
- MI 30 D K ST5 S1
- MI 35 D K ST5 S1
- 1. Legal disclaimer
- 2. Safety
- 2.1. Reduce risks program
- 2.1.1. Reduce risks program
- 2.2. Instructions to the Company Manager
- 2.2.1. The Site
- 2.2.2. The Operator
- 2.2.3. The Lift Truck
- 2.2.4. Instructions
- 2.2.5. Maintenance
- 2.3. Instructions for the Operator
- 2.3.1. Foreword
- 2.3.2. General Instructions
- 2.3.3. Operating Instructions Unladen and Laden
- 2.4. Lift Truck Maintenance Instructions
- 2.4.1. General Instructions
- 2.4.2. Maintenance
- 2.4.3. Lubricant and Fuel Levels
- 2.4.4. Hydraulics
- 2.4.5. Electricity
- 2.4.6. Welding
- 2.4.7. Washing The Lift Truck
- 2.4.8. Transporting the Lift Truck
- 2.5. If the Lift Truck is Not to be Used for a Long Time
- 2.5.1. Introduction
- 2.5.2. Preparing the Lift Truck
- 2.5.3. Protecting the Engine
- 2.5.4. Protecting the Lift Truck
- 2.5.5. Bringing the Lift Truck Back into Service
- 2.6. Lift Truck Disposal
- 2.6.1. Recycling of Materials
- 2.6.2. Environmental Protection
- 2.7. Decals
- 2.7.1. Decals location MI 2035 D K ST5 S1
- 3. Specifications Description
- 3.1. EC Declaration of conformity MI 2035 D K ST5 S1
- 3.1.1. EC declaration of conformity MI 2035 D K ST5 S1 (specimen) page 1/2
- 3.1.2. EC declaration of conformity MI 2035 D K ST5 S1 (specimen) page 2/2
- 3.2. Machine manufacturer plate
- 3.3. Attachment manufacturer plate
- 3.4. Machine specifications
- 3.4.1. Technical Datasheet MI 20 D K ST5 S1
- 3.4.2. Technical Datasheet MI 25 D K ST5 S1
- 3.4.3. Technical Datasheet MI 30 D K ST5 S1
- 3.4.4. Technical Datasheet MI 35 D K ST5 S1
- 3.4.5. Mast technical datasheet MI 20/25 D K ST5 S1
- 3.4.6. Mast technical datasheet MI 30/35 D K ST5 S1
- 3.4.7. Tires MI 20/25 D K ST5 S1
- 3.4.8. Tires MI 30/35 D K ST5 S1
- 3.4.9. Ground contact pressure MI 2035 D K ST5 S1
- 3.4.10. Load chart
- 3.5. Machine components
- 3.5.1. Components location MI 2035 D K ST5 S1
- 3.5.2. Drivers cab components location MI 2035 D K ST5 S1
- 3.6. Display controls
- 3.6.1. Machine switches
- 3.6.2. Minilevers controls
- 3.6.3. Display screen
- 3.6.4. Work page MI 2035 D K ST5 S1
- 4. Machine Operation
- 4.1. Installation at the drivers cab
- 4.1.1. Getting on/off the machine
- 4.1.2. Adjusting the seat
- 4.1.3. Adjusting the steering wheel
- 4.1.4. Adjusting the minilevers armrest
- 4.1.5. Fastening the seat belt
- 4.2. Operating the machine
- 4.2.1. Operating the machine with the operator presence system
- 4.2.2. Powering up the machine
- 4.2.3. Powering down the machine
- 4.2.4. Operating the horn
- 4.2.5. Operating the horn on the minilevers
- 4.2.6. Operating the rotating beacon
- 4.2.7. Operating the heater
- 4.2.8. Driving the machine
- 4.2.9. Handling a load
- 4.3. Management of the pollution control system
- 4.3.1. Deactivating the exhaust regeneration
- 4.3.2. Reactivating the exhaust regeneration
- 4.3.3. Starting the parked regeneration
- 4.4. Parking and storing the machine
- 4.4.1. Parking the machine
- 4.4.2. Storing the machine for a short duration
- 4.5. Transport and lifting of the machine
- 4.5.1. Winching/towing the machine
- 4.5.2. Loading/Unloading the machine
- 4.5.3. Tying down the machine
- 4.5.4. Lifting the machine MI 2035 D K ST5 S1
- 5. Maintenance
- 5.1. Maintenance components location MI 2035 D K ST5 S1
- 5.1.1. Maintenance components location MI 2035 D K ST5 S1
- 5.1.2. Maintenance components location MI 2035 D K ST5 S1
- 5.1.3. Maintenance components location under the engine cover MI 2035 D K ST5 S1
- 5.1.4. Maintenance components location under the engine cover MI 2035 D K ST5 S1
- 5.2. Opening the engine cover
- 5.2.1. Key in engine cover lock
- 5.2.2. Gas strut safety catch
- 5.3. Original Manitou Spare Parts and Equipment
- 5.3.1. Original Manitou Spare Parts and Equipment
- 5.3.2. By Allowing the Use of NonOriginal Manitou Parts, You Risk
- 5.3.3. Benefit of Using Manitou Original Parts
- 5.4. Forklift Truck Maintenance
- 5.4.1. Daily and Weekly Maintenance
- 5.4.2. Mandatory First 500 Hours or 6 Months Service
- 5.4.3. Periodic Service
- 5.4.4. Occasional Maintenance and Operation
- 5.5. Maintenance logbook
- 5.6. Servicing program
- 5.6.1. Daily and weekly maintenance
- 5.6.2. First mandatory servicing
- 5.6.3. Periodic servicing
- 5.7. hours of service or daily maintenance
- 5.7.1. Check engine oil level
- 5.7.2. Check cooling liquid level
- 5.7.3. Check fuel level
- 5.7.4. Check hydraulic fluid level
- 5.7.5. Check break fluid level
- 5.8. hours of service or weekly maintenance
- 5.8.1. Check transmission oil level
- 5.8.2. Check differential oil level
- 5.8.3. Clean radiator core
- 5.8.4. Clean dry air filter cartridge
- 5.8.5. Check wheel nut torques
- 5.8.6. Adjust tension and alignment of mast lifting chains
- 5.8.7. Grease mast
- 5.8.8. Check windscreen washer liquid level
- 5.8.9. Grease cab door
- 5.8.10. Grease rear axle
- 5.9. hours of service or 6 months
- 5.9.1. Replace dry air filter cartridge
- 5.9.2. Replace engine oil
- 5.9.3. Drain fuel water trap
- 5.9.4. Adjust alternator/fan/crankshaft belt tension
- 5.9.5. Grease mast lifting chains
- 5.10. hours of service or 1 year
- 5.10.1. Replace fuel filter
- 5.10.2. Replace fuel prefilter
- 5.10.3. Replace safety dry air cartridge
- 5.10.4. Replace transmission oil
- 5.10.5. Replace hydraulic oil
- 5.10.6. Grease brake pedal axles
- 5.10.7. Check seat belt
- 5.11. hours of service or 2 years
- 5.11.1. Replace cooling fluid
- 5.11.2. Clean fuel tank
- 5.11.3. Replace differential oil
- 5.11.4. Check wheel nuts tightening
- 5.12. Ocassional maintenance
- 5.12.1. Replace wheel
- 6. References attachments
- 6.1. References
- 6.1.1. Lubricants fuel MI 2035 D K ST5 S1
- 6.1.2. Filter elements belts MI 2035 D K ST5 S1
- 6.1.3. Fuses relays MI 2035 D K ST5 S1
- 6.2. Optional Adaptable Attachments for the Range
- 6.2.1. Usage and Installation of Attachment and Safety Rules
- 6.2.2. Use of Attachment
- 6.2.3. Attachment Assembly
- 6.3. Attachment specifications
- 6.3.1. Introduction
- 6.3.2. Technical specifications of attachments
