Manitou MXT 840 Operator Manual 53109859EN

Description

• Model List:
  • MXT 840

• 1. OPERATING AND SAFETY INSTRUCTIONS
• 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
• 1.1.1. THE SITE
• 1.1.2. THE OPERATOR
• 1.1.3. THE LIFT TRUCK
• 1.1.3.1. A SUITABILITY OF THE LIFT TRUCK FOR THE JOB
• 1.1.3.2. B ADAPTATION OF THE LIFT TRUCK TO STANDARD ENVIRONMENTAL CONDITIONS
• 1.2. INSTRUCTIONS FOR THE OPERATOR
• 1.2.1. FOREWORD
• 1.2.2. GENERAL INSTRUCTIONS
• 1.2.2.1. A OPERATORS MANUAL
• 1.2.2.2. B MAINTENANCE
• 1.2.2.3. C MODIFICATION OF THE LIFT TRUCK
• 1.2.2.4. D LIFTING PEOPLE
• 1.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
• 1.2.3.1. A BEFORE STARTING THE LIFT TRUCK
• 1.2.3.2. B AVAILABLE IN THE DRIVERS CAB
• 1.2.3.3. C ENVIRONMENT
• 1.2.3.4. D VISIBILITY
• 1.2.3.5. E STARTING THE LIFT TRUCK
• 1.2.3.6. F DRIVING THE LIFT TRUCK
• 1.2.3.7. G STOPPING THE LIFT TRUCK
• 1.2.4. INSTRUCTIONS FOR HANDLING A LOAD
• 1.2.4.1. A CHOICE OF ATTACHMENTS
• 1.2.4.2. B WEIGHT OF LOAD AND CENTRE OF GRAVITY
• 1.2.4.3. C LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
• 1.2.4.4. D TRANSVERSE ATTITUDE OF THE LIFT TRUCK
• 1.2.4.5. E PICKING UP A LOAD ON THE GROUND
• 1.2.4.6. F PICKING UP AND PUTTING DOWN A HIGH LOAD ON TYRES
• 1.2.4.7. G PICKING UP AND PUTTING DOWN A SUSPENDED LOAD
• 1.2.4.8. H TRAVELLING WITH A SUSPENDED LOAD
• 1.2.5. INSTRUCTIONS FOR USE AS A LOADER
• 1.2.5.1. A LOADING
• 1.2.5.2. B BACKFILLING
• 1.3. LIFT TRUCK MAINTENANCE INSTRUCTIONS
• 1.3.1. GENERAL INSTRUCTIONS
• 1.3.2. PLACING THE BOOM SAFETY WEDGE
• 1.3.2.1. FITTING THE WEDGE
• 1.3.2.2. REMOVING THE WEDGE
• 1.3.3. MAINTENANCE
• 1.3.3.1. MAINTENANCE LOGBOOK
• 1.3.4. LUBRICANT AND FUEL LEVELS
• 1.3.5. HYDRAULICS
• 1.3.6. ELECTRICITY
• 1.3.7. WELDING
• 1.3.8. WASHING THE LIFT TRUCK
• 1.3.9. TRANSPORTING THE LIFT TRUCK
• 1.4. IF THE LIFT TRUCK IS NOT GOING TO BE USED FOR A LONG TIME
• 1.4.1. INTRODUCTION
• 1.4.2. PREPARING THE LIFT TRUCK
• 1.4.3. DEF (Diesel Exhaust Fluid) TANK
• 1.4.4. PROTECTING THE ENGINE
• 1.4.5. PROTECTING THE LIFT TRUCK
• 1.5. LIFT TRUCK DISPOSAL
• 1.5.1. RECYCLING OF MATERIALS
• 1.5.1.1. METALS
• 1.5.1.2. PLASTICS
• 1.5.1.3. RUBBER
• 1.5.1.4. GLASS
• 1.5.2. ENVIRONMENTAL PROTECTION
• 1.5.2.1. WORN OR DAMAGED PARTS
• 1.5.2.2. USED OIL
• 1.5.2.3. USED BATTERIES
• 1.5.3. BRINGING THE LIFT TRUCK BACK INTO SERVICE
• 2. DESCRIPTION
• 2.1. IDENTIFICATION OF THE LIFT TRUCK
• 2.2. CHARACTERISTICS
• 2.3. DIMENSIONS AND LOAD CHARTS
• 2.4. VISIBILITY
• 2.5. INSTRUMENTS AND CONTROLS
• 2.6. DESCRIPTION AND USE OF THE OPTIONS
• 3. MAINTENANCE
• 3.1. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
• 3.2. FORKLIFT TRUCK MAINTENANCE
• 3.3. MANDATORY FIRST 500 HOURS OR 6 MONTHS SERVICE
• 3.4. FILTERS CARTRIDGES AND BELTS
• 3.5. LUBRICANTS AND FUEL
• 3.6. Ü 10 H DAILY SERVICING OR EVERY 10 HOURS OF SERVICE
• 3.7. Ü 50 H WEEKLY MAINTENANCE OR EVERY 50HOURS OF SERVICE
• 3.8. Ü 500 H ROUTINE SERVICING EVERY 500HOURS OF SERVICE OR 1 YEAR
• 3.9. Ü 1000 H ROUTINE SERVICING EVERY 1000 HOURS OF SERVICE OR 2 YEARS
• 3.10. Ü 2000 H ROUTINE SERVICING EVERY 2000 HOURS OF SERVICE OR 4 YEARS
• 3.11. Ü OCCASIONAL MAINTENANCE
• 4. OPTIONAL ADAPTABLE ATTACHMENTS FOR THE RANGE
• 4.1. INTRODUCTION
• 4.2. PICKING UP THE ATTACHMENTS
• 4.3. TECHNICAL SPECIFICATIONS OF ATTACHMENTS