Description
-
Model List:
- TMT-X 25 S K E3 S2
- TMT-X 25 S 4W K E3 S2
- 1. OPERATING AND SAFETY INSTRUCTIONS
- 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1.1. THE SITE
- 1.1.2. THE OPERATOR
- 1.1.3. THE MACHINE
- 1.1.3.1. A SUITABILITY OF THE MACHINE FOR THE TASK
- 1.1.3.2. B ADAPTING THE MACHINE TO USUAL ENVIRONMENTAL CONDITIONS
- 1.1.3.3. C MODIFYING THE MACHINE
- 1.1.3.4. D FRENCH ROAD TRAFFIC RULES
- 1.1.3.5. E PROTECTING THE CAB
- 1.1.4. INSTRUCTIONS
- 1.1.5. MAINTENANCE
- 1.2. INSTRUCTIONS FOR THE OPERATOR
- 1.2.1. INTRODUCTION
- 1.2.2. GENERAL INSTRUCTIONS
- 1.2.2.1. A INSTRUCTION MANUAL
- 1.2.2.2. B AUTHORIZATION FOR USE IN FRANCE
- 1.2.2.3. C MAINTENANCE
- 1.2.2.4. D TIRES
- 1.2.2.5. E MODIFYING THE MACHINE
- 1.2.2.6. F LIFTING PEOPLE
- 1.2.2.7. G REAR OF VEHICLE ATTACHMENT SYSTEM
- 1.2.2.8. H TRUCK LIFT SYSTEM
- 1.2.2.9. I MACHINE WITH ROLLERS
- 1.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
- 1.2.3.1. A BEFORE STARTING UP THE MACHINE
- 1.2.3.2. B DRIVERS OPERATING INSTRUCTIONS
- 1.2.3.3. C ENVIRONMENT
- 1.2.3.4. D VISIBILITY
- 1.2.3.5. E STARTING THE MACHINE
- 1.2.3.6. F OPERATING THE MACHINE
- 1.2.3.7. G STOPPING THE MACHINE
- 1.2.3.8. H DRIVING THE MACHINE ON THE PUBLIC HIGHWAY
- 1.2.4. INSTRUCTIONS FOR HANDLING A LOAD
- 1.2.4.1. A CHOICE OF ATTACHMENTS
- 1.2.4.2. B WEIGHT OF LOAD AND CENTER OF GRAVITY
- 1.2.4.3. C LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
- 1.2.4.4. D TRANSVERSE ATTITUDE OF THE MACHINE
- 1.2.4.5. E TAKING UP A LOAD ON THE GROUND
- 1.2.4.6. F PICKING UP AND SETTING DOWN A HIGH LOAD ON TIRES
- 1.2.4.7. G PICKING UP AND SETTING DOWN A HIGH LOAD ON STABILIZERS
- 1.2.4.8. H PICKING UP AND SETTING DOWN A SUSPENDED LOAD
- 1.2.4.9. I TRAVELING WITH A SUSPENDED LOAD
- 1.3. MACHINE MAINTENANCE INSTRUCTIONS
- 1.3.1. GENERAL INSTRUCTIONS
- 1.3.2. MAINTENANCE
- 1.3.3. LUBRICANT AND FUEL LEVELS
- 1.3.4. HYDRAULICS
- 1.3.5. ELECTRICITY
- 1.3.6. WELDING
- 1.3.7. WASHING THE MACHINE
- 1.3.8. TRANSPORTING THE MACHINE
- 1.4. PROLONGED MACHINE SHUTDOWN
- 1.4.1. INTRODUCTION
- 1.4.2. PREPARATION OF THE MACHINE
- 1.4.3. PROTECTING THE ENGINE
- 1.4.4. MACHINE PROTECTION
- 1.4.5. RETURNING THE MACHINE TO SERVICE
- 1.5. DISPOSING OF THE MACHINE
- 1.5.1. RECYCLING OF MATERIALS
- 1.5.1.1. METALS
- 1.5.1.2. PLASTICS
- 1.5.1.3. RUBBER
- 1.5.1.4. GLASS
- 1.5.2. ENVIRONMENTAL PROTECTION
- 1.5.2.1. WORN OR DAMAGED PARTS
- 1.5.2.2. USED OIL
- 1.5.2.3. USED BATTERIES
- 2. DESCRIPTION
- 2.1. SAFETY PLATES AND STICKERS
- 2.2. MACHINE IDENTIFICATION
- 2.3. SPECIFICATIONS TMTX 25 S K E3 S2
- 2.4. SPECIFICATIONS TMTX 25 S 4W K E3 S2
- 2.5. LOAD CHARTS TMTX 25 S K E3 S2 / TMTX 25 S 4W K E3 S2
- 2.6. TIRES
- 2.7. INSTRUMENTS AND CONTROLS
- 2.8. PROCEDURE FOR ATTACHING THE LIFT TRUCK TO THE REAR OF A LORRY OR TRAILER
- 3. MAINTENANCE
- 3.1. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 3.2. MACHINE MAINTENANCE
- 3.3. MAINTENANCE LOGBOOK
- 3.4. DAILY AND WEEKLY MAINTENANCE
- 3.5. MANDATORY FIRST 500 HOURS OR 6 MONTHS SERVICE
- 3.6. PERIODIC MAINTENANCE
- 3.7. OCCASIONAL MAINTENANCE AND OPERATION
- 3.8. FILTER CARTRIDGES AND BELTS
- 3.9. LUBRICANTS AND FUEL
- 3.10. Ü 10H DAILY MAINTENANCE OR EVERY 10HOURS OF SERVICE
- 3.11. Ü 50H WEEKLY MAINTENANCE OR EVERY 50HOURS OF SERVICE
- 3.12. Ü 500H PERIODIC MAINTENANCE EVERY 500 HOURS OF SERVICE
- 3.13. Ü 1000H PERIODIC MAINTENANCE EVERY 1,000 HOURS OF SERVICE OR 2 YEARS
- 3.14. Ü2000H PERIODIC MAINTENANCE EVERY 2,000 HOURS OF SERVICE OR 4 YEARS
- 3.15. Ü OCCASIONAL MAINTENANCE
- 3.16. Ü OCCASIONAL OPERATION
- 4. OPTIONAL ADAPTABLE ATTACHMENTS FOR THE RANGE
- 4.1. INTRODUCTION
- 4.2. TECHNICAL SPECIFICATIONS OF ATTACHMENTS
- 4.3. ATTACHMENT GUARDS
