Description
-
Model List:
- KLEOS DHM 250
- 1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1. THE SITE
- 1.2. THE OPERATOR
- 1.3. THE STACKER
- 1.3.1. A FITNESS OF THE STACKER FOR PURPOSE
- 1.3.2. B STACKER MODIFICATION
- 1.4. THE INSTRUCTIONS
- 1.5. MAINTENANCE
- 2. INSTRUCTIONS FOR THE OPERATOR
- 2.1. PREAMBLE
- 2.2. GENERAL INSTRUCTIONS
- 2.2.1. A OPERATORS MANUAL
- 2.2.2. B AUTHORISATION FOR USE
- 2.2.3. C MAINTENANCE
- 2.2.4. D MODIFICATION OF STACKER
- 2.2.5. E LIFTING PEOPLE
- 2.2.6. F STACKER DIRECTION OF TRAVEL
- 2.3. UNLADEN AND LADEN STACKER OPERATING INSTRUCTIONS
- 2.3.1. A PRIOR TO USING THE STACKER
- 2.3.2. B DRIVERS OPERATING INSTRUCTIONS
- 2.3.3. C ENVIRONMENT
- 2.3.4. D VISIBILITY
- 2.3.5. E STACKER OPERATION
- 2.3.6. F STOPPING THE STACKER
- 2.4. INSTRUCTIONS FOR HANDLING A LOAD
- 2.4.1. A CHOICE OF TOOL
- 2.4.2. B WEIGHT AND CENTRE OF GRAVITY OF THE LOAD
- 2.4.3. C TROLLEY POSITION
- 2.4.4. D PICKING UP A LOAD ON THE GROUND
- 2.4.5. E PICKING UP AND SETTING DOWN A LOAD
- 2.4.6. F SETTING DOWN A LOAD IN A STORAGE STRUCTURE
- 2.4.7. G PICKING UP A LOAD IN A STORAGE STRUCTURE
- 2.4.8. H PICKING UP AND SETTING DOWN A SUSPENDED LOAD
- 2.4.9. I TRAVELLING WITH A SUSPENDED LOAD
- 3. STACKER MAINTENANCE INSTRUCTIONS
- 3.1. GENERAL INSTRUCTIONS
- 3.2. MAINTENANCE
- 3.3. HYDRAULIC
- 4. STACKER DECOMMISSIONING AND DISPOSAL
- 4.1. DECOMMISSIONING
- 4.2. DISPOSAL
- 5. CE DECLARATION OF CONFORMITY
- 6. SAFETY PLATES AND STICKERS
- 6.1. EXTERNAL PLATES AND STICKERS
- 7. STACKER IDENTIFICATION
- 7.1. STACKER MANUFACTURERS PLATE (fig. A)
- 7.2. TOOL MANUFACTURERS PLATE (fig. B)
- 8. TECHNICAL CHARACTERISTICS
- 8.1. DESCRIPTION
- 8.1.1. CHASSIS
- 8.1.2. MOVING FRAME
- 8.1.3. GUIDE HANDLES
- 8.1.4. LIFTING DRIVE BELT
- 8.1.5. CARRIAGE
- 8.1.6. HYDRAULIC CYLINDER
- 8.1.7. FRONT WHEEL
- 8.1.8. REAR WHEEL
- 8.1.9. FOOT BRAKE
- 8.1.10. HYDRAULIC PUMP
- 8.1.11. PRESSURE RELEASE PEDAL
- 8.1.12. HYDRAULIC PUMP LEVER
- 8.1.13. TOOL
- 9. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 10. STARTUP CHECKLIST
- 11. LUBRICANTS
- 12. SERVICING SCHEDULE
- 13. A DAILY CHECKS
- 13.1. A1 FOOT BRAKE EFFICIENCY
- 13.2. A2 WHEEL WEAR
- 13.3. A3 BELT (CONDITION AND WEAR)
- 13.4. A4 HYDRAULIC SYSTEM OPERATION
- 13.5. A5 PRESSURE RELEASE PEDAL (RETURN TO NEUTRAL)
- 13.6. A6 CONDITION AND ATTACHMENT OF FORK OR TOOL
- 14. B MONTHLY
- 14.1. B1 TIGHTENING OF WHEEL HUTS
- 14.2. B2 TIGHTENING OF SCREWS AND NUTS
- 15. C EVERY SIX MONTHS
- 15.1. C1 MOVING FRAME
- 15.2. C2 CYLINDER CONDITION AND SEAL
- 15.3. C3 HYDRAULIC PUMP HOSE
- 16. D YEARLY
- 16.1. D1 MOVING FRAME
- 16.2. D2 CARRIAGE
- 16.3. D3 STROKE AND SPEED OF HYDRAULIC MOVEMENTS
- 16.4. D4 OPERATION OF PRESSURE LIMITER
- 17. E EVERY FOUR YEARS
- 17.1. E1 BELT
- 17.2. E2 PRESSURE RELEASE PEDAL, SPRING AND VALVE
- 18. F OCCASIONAL
- 18.1. F1 HANDLING
- 18.2. F2 TRANSPORT
- 19. INTRODUCTION
- 20. TECHNICAL CHARACTERISTICS
- 20.1. TOOLS FOR THE KLEOS HM 250 STACKER
