Description
-
Model List:
- CX Gator Compact Series Utility Vehicles
- 1. Introduction
- 1.1. Thank You for Purchasing a John Deere Product
- 1.2. Using Your Operators Manual
- 1.3. Machine Use
- 1.4. Special Messages
- 1.5. Attachments for Your Machine
- 2. Contents
- 3. Product Identification
- 3.1. Record Identification Numbers
- 3.1.1. GATOR Compact Series Utility Vehicle
- 4. Safety Labels
- 4.1. Safety Label Location
- 4.2. Pictorial Safety Signs
- 4.3. Young Drivers Increase Chance of Death
- 4.3.1. Before Leaving Vehicle
- 4.4. Avoid Injury From Battery Gases and Acid
- 4.5. Avoid Injury From Tipping
- 4.6. Hot Surfaces
- 4.7. Drawbar Load
- 4.8. Avoid Injury From Explosion
- 4.9. Rollover Or Falling Off May Cause Death
- 4.10. Prevent Equipment Fires
- 4.11. Help Prevent Injury When Dumping Loads
- 4.12. CE Certification Label
- 4.13. Supervisor Safety Responsibilities
- 4.14. Operator Training Required
- 4.15. Operating Safely
- 4.16. Using a Spark Arrestor
- 4.17. Parking Safely
- 4.18. Protect Children and Prevent Accidents
- 4.19. Avoid Excessive Speeds
- 4.20. Vibration
- 4.21. Avoid Tipping
- 4.22. Keep Riders Off Vehicle
- 4.23. Using Front Attachments
- 4.24. Transport Loads Safely
- 4.25. Towing Loads Safely With Utility Vehicle
- 4.26. Before Driving
- 4.27. Driving On Rough Terrain
- 4.28. Climbing Or Descending A Hill
- 4.29. Driving Across Slopes
- 4.30. Riding Through Water
- 4.31. Checking Wheel Hardware
- 4.32. Wear Appropriate Clothing
- 4.33. Practice Safe Maintenance
- 4.34. Prevent Fires
- 4.35. Do Not Modify Machine
- 4.36. Tire Safety
- 4.37. Handling Fuel Safely
- 4.38. Handle Agricultural Chemical Safely
- 4.39. Handling Waste Product and Chemicals
- 5. Machine Cleanout
- 5.1. Prevent Fires
- 6. Operating Controls
- 6.1. Operator Station Controls
- 7. Operating
- 7.1. Daily Operating Checklist
- 7.2. Avoid Damage to Plastic and Painted Surfaces
- 7.3. Adjusting Seat
- 7.3.1. Adjusting Seat Position
- 7.4. Using Hand Holds
- 7.5. Testing Safety Systems
- 7.6. Testing the Safety Start System
- 7.7. Using Park Brake
- 7.7.1. Locking Park Brake
- 7.7.2. Unlocking Park Brake
- 7.8. Using Ignition Key Switch
- 7.9. Using Headlights
- 7.10. Using 3Way Light Switch (If Equipped)
- 7.11. Using Hazard Lights (If Equipped)
- 7.12. Using Hour Meter
- 7.13. Using Turn Signal Switch (If equipped)
- 7.14. Using Accessory Outlet (If equipped)
- 7.15. Starting the Engine
- 7.16. Stopping Engine
- 7.17. Emergency Stopping
- 7.18. Using Travel Controls
- 7.18.1. Traveling Forward
- 7.18.2. Traveling in Reverse
- 7.18.3. Stopping
- 7.19. Using Traction Assist
- 7.19.1. Engaging the traction assist
- 7.19.2. Disengaging the Traction Assist
- 7.20. Raising and Lowering Cargo Box
- 7.20.1. Manual Lift
- 7.20.2. Power Lift (Optional)
- 7.20.3. Manual Lift Assist (Optional)
- 7.21. Operating the Tailgate
- 7.21.1. Opening Tailgate
- 7.21.2. Closing Tailgate
- 7.22. Removing and Installing Tailgate
- 7.22.1. Removing Tailgate
- 7.22.2. Installing Tailgate
- 7.23. Loading the Cargo Box
- 7.24. Emptying Cargo Box
- 7.25. Towing Loads
- 7.26. Transporting Vehicle
- 7.26.1. Towing the Machine
- 7.26.2. Machine Tie Down Locations
- 7.26.3. Hauling the Machine
- 8. Replacement Parts
- 8.1. Service Literature
- 8.1.1. Order Service Parts Online
- 8.2. Part Numbers
- 9. Service Intervals
- 9.1. Servicing Your Machine
- 9.2. Break In
- 9.2.1. After 8 Hours of Use
- 9.3. Every 50 Hours or Annually
- 9.4. Every 100 Hours or Annually
- 9.5. Every 200 Hours
- 9.6. Every 250 Hours or Every 2 Years
- 10. Service Lubrication
- 10.1. Lubricating King Pins on Front Wheel Suspension
- 11. Service Engine
- 11.1. Avoid Fumes
- 11.2. Engine Oil
- 11.3. Checking Engine Oil Level
- 11.4. Changing Engine Oil and Filter
- 11.5. Cleaning Rubber Dust Unloading Valve
- 11.6. Servicing Air Cleaner Element
- 11.7. Checking Air Intake Hoses and Clamps
- 11.8. Checking Spark Plug
- 11.9. Replacing Fuel Filter
- 11.10. Adjusting Carburetor
- 11.11. Cleaning Engine Compartment and Fins
- 12. Service Transmission
- 12.1. Transaxle Oil
- 12.2. Checking Transaxle Oil Level
- 12.3. Changing Transaxle Oil
- 12.4. Checking Drive Belt
- 12.5. Replacing Drive Belt
- 12.6. Checking Secondary Clutch Buttons
- 13. Service Electrical
- 13.1. Service the Battery Safely
- 13.2. Removing and Installing Battery
- 13.2.1. Removing
- 13.2.2. Installing
- 13.3. Cleaning Battery and Terminals
- 13.4. Supplemental Battery Maintenance
- 13.5. Using Booster Battery
- 13.6. Replacing Headlight Bulb
- 13.7. Replacing Fuses
- 14. Service Miscellaneous
- 14.1. Using Proper Fuel and Stabilizer
- 14.2. Filling Fuel Tank
- 14.3. Checking Tire Pressure
- 14.4. Opening and Closing Hood
- 14.4.1. Opening Hood
- 14.4.2. Closing Hood
- 14.5. Removing and Installing Engine Access Panel
- 14.5.1. Removing
- 14.5.2. Installing
- 14.6. Lifting Machine
- 14.7. Shock Adjustment
- 14.7.1. Preload Adjustment
- 14.8. Removing and Installing Front Wheel Assembly
- 14.8.1. Removing
- 14.8.2. Installing
- 14.9. Removing and Installing Rear Wheel Assembly
- 14.9.1. Removing
- 14.9.2. Installing
- 14.10. Checking Brakes and Brake Cables
- 14.11. Checking Traction Assist Cable Operation
- 14.12. Cleaning Plastic Surfaces
- 14.13. Cleaning and Repairing Metal Surfaces
- 14.13.1. Cleaning
- 14.13.2. Repairing Minor Scratches (surface scratch)
- 14.13.3. Repairing Deep Scratches (bare metal or primer showing)
- 15. Troubleshooting
- 15.1. Using Troubleshooting Chart
- 15.2. Electrical
- 16. Storage
- 16.1. Storing Safety
- 16.2. Preparing Machine for Storage
- 16.3. Preparing Fuel and Engine For Storage
- 16.3.1. Engine
- 16.4. Removing Machine From Storage
- 17. Assembly
- 17.1. Checking Tire Pressure
- 17.2. Charge and Connect Battery
- 17.3. Prepare Brakes
- 17.3.1. Seat Brakes
- 17.3.2. Burnish Brakes
- 17.3.3. Check Fluid Levels
- 17.3.4. Test Safety Start System
- 17.4. Check Fluid Levels
- 17.5. Test Safety Start System
- 18. Specifications
- 18.1. Engine Specifications
- 18.2. Electrical System
- 18.3. Fuel System
- 18.4. Drive Train
- 18.5. Steering and Brakes
- 18.6. Capacities
- 18.6.1. Crankcase
- 18.7. Dimensions
- 18.7.1. Inflation Pressure
- 18.7.2. Inflation Pressure
- 18.8. Recommended Lubricants
- 18.9. Fast Idle Engine Speed
- 18.10. Sound Measurements
- 18.11. Vibration Measurements
- 19. Declaration Of Conformity
- 19.1. EC Declaration of Conformity
- 20. Service Statement
- 20.1. John Deere Parts
- 20.2. The Right Tools
- 20.3. WellTrained Technicians
- 20.4. Prompt Service
- 21. Service Record
- 21.1. Record Service Dates
