Manitou MI 15 D, MI 15 G, MI 18 D, MI 18 G, MI 20 D, MI 20 G, MI 25 D, MI 25 G, MI 30 D, MI 30 G, MI 35 D, MI 35 G Operator Manual 647377EN

Description

• Model List:
  • MI 15 D
  • MI 15 G
  • MI 18 D
  • MI 18 G
  • MI 20 D
  • MI 20 G
  • MI 25 D
  • MI 25 G
  • MI 30 D
  • MI 30 G
  • MI 35 D
  • MI 35 G

• 2.1. INSTRUCTIONS TO THE COMPANY MANAGER
• 2.1.1. THE SITE
• 2.1.2. THE OPERATOR
• 2.1.3. THE LIFT TRUCK
• 2.1.4. THE INSTRUCTIONS
• 2.1.5. THE MAINTENANCE
• 2.2. INSTRUCTIONS FOR THE OPERATOR
• 2.2.1. PREAMBULE
• 2.2.2. GENERAL INSTRUCTIONS
• 2.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
• 2.2.4. INSTRUCTIONS FOR HANDLING A LOAD
• 2.3. MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
• 2.3.1. GENERAL INSTRUCTIONS
• 2.3.2. MAINTENANCE
• 2.3.3. LUBRICANT AND FUEL LEVELS
• 2.3.4. HYDRAULIC
• 2.3.5. ELECTRICITY
• 2.3.6. WELDING
• 2.3.7. WASHING THE LIFT TRUCK
• 2.4. IF THE LIFT TRUCK IS NOT TO BE USED FOR A LONG TIME
• 2.4.1. INTRODUCTION
• 2.4.2. PREPARING THE LIFT TRUCK
• 2.4.3. PROTECTING THE I.C. ENGINE
• 2.4.4. PROTECTING THE LIFT TRUCK
• 2.4.5. BRINGING THE LIFT TRUCK BACK INTO SERVICE
• 3.1. EC DECLARATION OF CONFORMITY
• 3.2. IDENTIFICATION OF THE LIFT TRUCK
• 3.3. CHARACTERISTICS MI 15 D MI 18 D
• 3.4. CHARACTERISTICS MI 15 G MI 18 G
• 3.5. CHARACTERISTICS MI 20 D MI 25 D
• 3.6. CHARACTERISTICS MI 20 G MI 25 G
• 3.7. CHARACTERISTICS MI 30 D MI 35 D
• 3.8. CHARACTERISTICS MI 30 G MI 35 G
• 3.9. CHARACTERISTICS OF MASTS WITH ROLLERS AND LOAD CHARTS MI 15 D MI 15 G MI 18 D MI 18 G
• 3.10. CHARACTERISTICS OF MASTS WITH ROLLERS AND LOAD CHARTS MI 20 D MI 20 G MI 25 D MI 25 G
• 3.11. CHARACTERISTICS OF MASTS WITH ROLLERS AND LOAD CHARTS MI 30 D MI 30 G MI 35 D MI 35 G
• 3.12. FRONT AND REAR TIRES
• 3.13. INSTRUMENTS AND CONTROLS
• 3.14. TOWING PIN AND HOOK
• 4.1. MANITOU ORIGINAL SPARE PARTS AND EQUIPMENT
• 4.2. FILTERS CARTRIDGES AND BELTS MI 15 D MI 18 D MI 20 D MI 25 D MI 30 D MI 35 D
• 4.3. FILTERS CARTRIDGES AND BELTS MI 15 G MI 18 G MI 20 G MI 25 G MI 30 G MI 35 G
• 4.4. LUBRICANTS AND FUEL
• 4.5. SERVICING SCHEDULE
• 4.6. A DAILY OR EVERY 10 HOURS OF SERVICE
• 4.7. B EVERY 50 HOURS OF SERVICE
• 4.8. C EVERY 250 HOURS OF SERVICE
• 4.9. D EVERY 500 HOURS OF SERVICE
• 4.10. E EVERY 1000 HOURS OF SERVICE
• 4.11. F EVERY 2000 HOURS OF SERVICE
• 4.12. G OCCASIONAL MAINTENANCE
• 5.1. INTRODUCTION
• 5.2. TECHNICAL SPECIFICATIONS OF ATTACHMENTS
• 5.3. ATTACHMENT SHIELDS