Description
-
Model List:
- TMT 25 I S1-E3
- TMT 25 S S1-E3
- TMT 27 S S1-E3
- TMT 27 P S1-E3
- TMT 25 P S1-E3
- 2.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 2.1.1. THE SITE
- 2.1.2. THE OPERATOR
- 2.1.3. THE LIFT TRUCK
- 2.1.4. THE INSTRUCTIONS
- 2.1.5. THE MAINTENANCE
- 2.2. INSTRUCTIONS FOR THE OPERATOR
- 2.2.1. PREAMBLE
- 2.2.2. GENERAL INSTRUCTIONS
- 2.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
- 2.2.4. INSTRUCTIONS FOR HANDLING A LOAD
- 2.3. MAINTENANCE INSTRUCTIONS OF THE LIFT TRUCK
- 2.3.1. GENERAL INSTRUCTIONS
- 2.3.2. MAINTENANCE
- 2.3.3. LUBRICANT AND FUEL LEVELS
- 2.3.4. HYDRAULIC
- 2.3.5. ELECTRICITY
- 2.3.6. WELDING
- 2.3.7. WASHING THE LIFT TRUCK
- 2.4. IF THE LIFT TRUCK IS NOT TO BE USED FOR A LONG TIME
- 2.4.1. INTRODUCTION
- 2.4.2. PREPARING THE LIFT TRUCK
- 2.4.3. PROTECTING THE ENGINE
- 2.4.4. PROTECTING THE LIFT TRUCK
- 2.4.5. BRINGING THE LIFT TRUCK BACK INTO SERVICE
- 3.1. EC DECLARATION OF CONFORMITY
- 3.2. IDENTIFICATION OF THE LIFT TRUCK
- 3.3. CHARACTERISTICS TMT 25 I S1E3
- 3.4. CHARACTERISTICS TMT 25 S S1E3
- 3.5. CHARACTERISTICS TMT 27 S S1E3
- 3.6. CHARACTERISTICS TMT 27 P S1E3
- 3.7. CHARACTERISTICS TMT 25 P S1E3
- 3.8. FRONT AND REAR TIRES
- 3.9. DIMENSIONS AND LOAD CHARTS TMT 25 I S1E3
- 3.10. DIMENSIONS AND LOAD CHARTS TMT 25 S S1E3
- 3.11. DIMENSIONS AND LOAD CHARTS TMT 27 S S1E3
- 3.12. DIMENSIONS AND LOAD CHARTS TMT 27 P S1E3
- 3.13. DIMENSIONS AND LOAD CHARTS TMT 25 P S1E3
- 3.14. INSTRUMENTS AND CONTROLS
- 3.15. SCREEN DISPLAY DESCRIPTION OF PAGES
- 3.16. DESCRIPTION AND USE OF ELECTRIC AND HYDRAULIC OPTIONS
- 3.17. PROCEDURE FOR ATTACHING THE LIFT TRUCK TO THE REAR OF A LORRY OR TRAILER
- 4.1. MANITOU ORIGINAL SPARE PARTS AND EQUIPMENT
- 4.2. STARTUP CHECKLIST
- 4.3. FILTERS CARTRIDGES AND BELTS
- 4.4. LUBRICANTS AND FUEL
- 4.5. SERVICING SCHEDULE
- 4.6. A DAILY OR EVERY 10 HOURS SERVICE
- 4.7. B EVERY 50 HOURS SERVICE
- 4.8. C EVERY 250 HOURS OF SERVICE
- 4.9. D EVERY 500 HOURS SERVICE
- 4.10. E EVERY 1000 HOURS OF SERVICE
- 4.11. F EVERY 2000 HOURS OF SERVICE
- 4.12. G OCCASIONAL MAINTENANCE
- 5.1. INTRODUCTION
- 5.2. TECHNICAL SPECIFICATIONS OF ATTACHMENTS
- 5.3. ATTACHMENT SHIELDS
