John Deere 455 Series Two and Three Unit Folding Grain Drill Operator Manual OMKK33717
John Deere 455 Series Two and Three Unit Folding Grain Drill Operator Manual OMKK33717-2
John Deere 455 Series Two and Three Unit Folding Grain Drill Operator Manual OMKK33717-3
John Deere 455 Series Two and Three Unit Folding Grain Drill Operator Manual OMKK33717-2
John Deere 455 Series Two and Three Unit Folding Grain Drill Operator Manual OMKK33717-3

John Deere 455 Series Two and Three Unit Folding Grain Drill Operator Manual OMKK33717

$30

  • Type Of Manual: Operator Manual
  • Manual ID: OMKK33717
  • Format: PDF
  • Size: 3.5MB
  • Number of Pages: 146
Category: Tag:
Description
  • Model List:

    • 455 Series Two and Three Unit Folding Grain Drill
  • 1. Contents
  • 1.0.1. Recognize Safety Information
  • 1.0.2. Understand Signal Words
  • 1.0.3. Follow Safety Instructions
  • 1.0.4. Replace Safety Signs
  • 1.0.5. Hydraulic Hose Replacement
  • 1.0.6. Prevent Machine Runaway
  • 1.0.7. Operate Safely
  • 1.0.8. Keep Riders Off Machine
  • 1.0.9. Prepare for Emergencies
  • 1.0.10. Wear Protective Clothing
  • 1.0.11. Handle Agricultural Chemicals Safely
  • 1.0.12. Use Safety Lights and Devices
  • 1.0.13. Use a Safety Chain
  • 1.0.14. Avoid TipOvers
  • 1.0.15. Follow Tire Recommendations
  • 1.0.16. Transport Safely
  • 1.0.17. Tow Loads Safely
  • 1.0.18. Observe Maximum Transport Speed
  • 1.0.19. Remove Paint Before Welding or Heating
  • 1.0.20. Avoid Heating Near Pressurized Fluid Lines
  • 1.0.21. Practice Safe Maintenance
  • 1.0.22. Avoid HighPressure Fluids
  • 1.0.23. Store Attachments Safely
  • 1.0.24. Decommissioning Proper Recycling and Disposal of Fluids and Components
  • 1.0.25. Safety Features
  • 1.1. Safety Signs
  • 1.1.1. Safety Signs
  • 1.2. Information Signs
  • 1.2.1. Information Signs
  • 1.3. Preparing Tractor
  • 1.3.1. Use The Tractor Operators Manual
  • 1.3.2. Adjust Metering ValvesTractors With Mechanical SCV (Selective Control Valve)
  • 1.3.3. Adjust Metering ValvesTractors With Electro/Hydraulic SCV Controls
  • 1.3.4. Check Seed MonitorIf Equipped
  • 1.3.5. ImplementTractor Compatibility
  • 1.3.6. Prepare Hitch
  • 1.3.7. Install Regular Drawbar Support (5560 Series Tractors)
  • 1.3.8. Install WideSwing Drawbar Support (5560 Series Tractors)
  • 1.3.9. Attach Drawbar Support on 7000 Series Tractors
  • 1.3.10. Safety Chain
  • 1.3.11. Lever Lock ClipTractors With Mechanical SCV Controls
  • 1.3.12. Install Lever Lock ClipTractors With Mechanical SCV Controls
  • 1.4. Preparing Machine
  • 1.4.1. Check Tire Pressure
  • 1.4.2. Calibrate Drill
  • 1.4.3. Tighten Wheel Bolts
  • 1.4.4. Lubricate Grain Drill
  • 1.5. Attaching and Detaching
  • 1.5.1. Attach Machine to Tractor
  • 1.5.2. Detach Machine From Tractor
  • 1.6. Transporting
  • 1.6.1. Transporting
  • 1.6.2. Warning Light Configuration (Style A)
  • 1.6.3. Light Enhancement Module
  • 1.7. Operating Machine
  • 1.7.1. Guidelines for Use
  • 1.7.2. Check Seed MonitorIf Equipped
  • 1.7.3. Level Machine
  • 1.7.4. Fold Machine
  • 1.7.5. Unfold Machine
  • 1.7.6. Adjust Hydraulic Down Force (John Deere Tractors With Closed Center Hydraulic Systems)
  • 1.7.7. Adjust Hydraulic Down Force (Tractors With Open Center Hydraulic Systems)
  • 1.7.8. Adjust Depth Gauging Press Wheels
  • 1.7.9. Adjust Depth Gauging Press Wheel Handle
  • 1.7.10. Operate Select LiftIf Equipped
  • 1.7.11. Use Lever Lock Clip
  • 1.7.12. Adjust DoubleDisk Outside Scrapers
  • 1.7.13. Check Disk BladesAluminum Boot
  • 1.7.14. Set Spill Shields
  • 1.7.15. Change Partition
  • 1.7.16. Change to Grain Only Partition Position
  • 1.7.17. Change to 40 Grain and 60 Fertilizer Partition Position
  • 1.7.18. Importance of Checking Quantities Drilled
  • 1.7.19. Checking Quantities DrilledMethod 1
  • 1.7.20. Checking Quantities DrilledMethod 2
  • 1.7.21. Drilling Row Crops
  • 1.8. Operating FlutedFeed Meter
  • 1.8.1. Check Grain Feeds
  • 1.8.2. Set Grain Shifter
  • 1.8.3. Using Seed Mixtures
  • 1.8.4. Cleaning and Setting
  • 1.8.5. Using Half Speed Drive Attachment
  • 1.8.6. Understand Rate Charts
  • 1.8.7. Using Kilograms of Seed Per Hectare Chart
  • 1.8.8. Using Pounds of Seed Per Acre Chart
  • 1.8.9. Use Density Meter and Seed Charts
  • 1.8.10. cm Row Spacing Rate Chart
  • 1.8.11. in. Row Spacing Rate Chart
  • 1.8.12. cm Row Spacing Rate Chart
  • 1.8.13. in. Row Spacing Rate Chart
  • 1.8.14. cm Row Spacing Rate Chart
  • 1.8.15. in. Row Spacing Rate Chart
  • 1.9. Operating Fertilizer Meter
  • 1.9.1. Fertilizer Feed Shaft Speed
  • 1.9.2. Fertilizer Drive Settings
  • 1.9.3. Use Density Meter and Fertilizer Charts
  • 1.9.4. Fertilizer Charts
  • 1.9.5. Clean Fertilizer Box
  • 1.10. Operating Grass Seed Meter
  • 1.10.1. Checking Feeds
  • 1.10.2. Set Feed Shifter
  • 1.10.3. Use Seed Mixtures
  • 1.10.4. Use Seed Charts
  • 1.10.5. Use Density Meter and Grass Seed Charts
  • 1.10.6. cm Row Spacing Rate Chart
  • 1.10.7. in. Row Spacing Rate Chart
  • 1.10.8. cm Row Spacing Rate Chart
  • 1.10.9. in. Row Spacing Rate Chart
  • 1.10.10. cm Row Spacing Rate Chart
  • 1.10.11. in. Row Spacing Rate Chart
  • 1.11. Attachments
  • 1.11.1. Select Lift
  • 1.11.2. Grass Seed Attachment
  • 1.11.3. Seed Agitator
  • 1.11.4. DrillShaft Turn Indicator
  • 1.11.5. HalfSpeed Drive for FlutedFeed
  • 1.11.6. Grain Feed StopFluted Feeds
  • 1.11.7. Fertilizer Feed Stop
  • 1.11.8. Grass Seed Feed Stop
  • 1.11.9. Install Press Wheels
  • 1.11.10. Dual Press Wheel Placement 19 cm and 25 cm (7.5 in. and 10 in. Spacing)
  • 1.11.11. Install Marker Disk to Arm
  • 1.11.12. Additional Selector Valve for Two Outlet Tractor Systems
  • 1.11.13. Row Marker Sequencer Control
  • 1.11.14. Row Marker Selector Valve
  • 1.12. Lubrication and Maintenance
  • 1.12.1. Gear Oil
  • 1.12.2. Alternative and Synthetic Lubricants
  • 1.12.3. Lubrication Symbols
  • 1.12.4. Lubricant Storage
  • 1.12.5. Lubrication
  • 1.12.6. Every 100 Hours
  • 1.13. Troubleshooting
  • 1.13.1. TroubleshootingGeneral
  • 1.13.2. TroubleshootingHydraulic Down Force
  • 1.13.3. TroubleshootingHydraulic Down Force on Tractors with Open Center Hydraulics Using Attachment for Field Conversion
  • 1.14. Servicing
  • 1.14.1. Practice Safe Maintenance
  • 1.14.2. Prevent Machine Runaway
  • 1.14.3. Handle Agricultural Chemicals Safely
  • 1.14.4. LockUp Rockshafts and Openers
  • 1.14.5. Metric Bolt and Screw Torque Values
  • 1.14.6. Unified Inch Bolt and Screw Torque Values
  • 1.14.7. Service Tires Safely
  • 1.14.8. Check Tire Pressure
  • 1.14.9. Check Wheel Bolts and Wheel Bearings
  • 1.14.10. Secure Machine for Safe Servicing
  • 1.14.11. Hydraulic Hose Replacement
  • 1.14.12. Remove and Repair Cylinders
  • 1.14.13. Bleed Trapped Air From Cylinders
  • 1.14.14. Reset FlutedFeed Cups
  • 1.14.15. Check Feed Shaft Rolling Torque
  • 1.14.16. Tighten Fertilizer Feed Shaft Drive Chains
  • 1.14.17. Tighten Fertilizer Drive Chains
  • 1.14.18. Replace Fertilizer Feed Wheels
  • 1.14.19. Determine When to Replace DoubleDisk Blades
  • 1.14.20. Reverse DoubleDisk Blades to Maintain Offset
  • 1.14.21. Replace and Adjust DoubleDisk Blades on Aluminum Boots
  • 1.14.22. Replace Inside Scrapers
  • 1.14.23. Replace Seed TubesDoubleDisk Opener
  • 1.14.24. Replace Single Wheel Wing Drive Shear Pin
  • 1.14.25. Hydraulic DiagramOpener Lift Cylinders 7.6 m (25 ft)
  • 1.14.26. Hydraulic DiagramOpener Lift Cylinders 9.1 m (30 ft)
  • 1.14.27. Hydraulic DiagramOpener Lift Cylinders 10.7 m (35 ft)
  • 1.14.28. Hydraulic DiagramCart Lift Cylinders 7.6 m (25 ft)
  • 1.14.29. Hydraulic DiagramCart Lift Cylinders 9.1 m and 10.7 m (30 and 35 ft)
  • 1.14.30. Hydraulic DiagramWing Fold Cylinders
  • 1.14.31. Hydraulic DiagramSelector Valve (2 Outlet Conversion)
  • 1.14.32. Hydraulic DiagramSingle (LeftHand) Row Markers
  • 1.14.33. Hydraulic DiagramLeftHand and RightHand Dual Row Markers
  • 1.15. Storing
  • 1.15.1. Prepare Drill for Storage
  • 1.15.2. Remove Drill From Storage
  • 1.16. Specifications
  • 1.16.1. Tractor Requirements
  • 1.16.2. Drawbar Hitch Loads
  • 1.16.3. Specifications
  • 1.16.4. Locate and Record Your Drill Identification Number
  • 1.16.5. Keep Proof of Ownership
  • 1.16.6. Keep Machines Secure
  • 1.17. John Deere Service Literature
  • 1.17.1. Technical Information
  • 1.18. John Deere Service Keeps You on the Job
  • 1.18.1. John Deere Is At Your Service
  • 2. Page Number
  • 2.1. Section 05
  • 2.2. Section 10
  • 2.3. Section 15
  • 2.4. Section 20
  • 2.5. Section 25
  • 2.6. Section 30
  • 2.7. Section 35
  • 2.8. Section 40
  • 2.9. Section 45
  • 2.10. Section 50
  • 2.11. Section 55
  • 2.12. Section 60
  • 2.13. Section 65
  • 2.14. Section 70
  • 2.15. Section 75
  • 2.16. Section 80
  • 2.17. Section 85

Related products

-50%
Mahindra Tractor 10 Series 6110 Gear Cab Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 6110 Gear Cab Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 2216 Gear Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 2216 Gear Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 15 Series 2015 4WD Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 15 Series 2015 4WD Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 1816 HST Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 1816 HST Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 10 Cab Series 4510C Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 10 Cab Series 4510C Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 10 Series 4010 HST Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 4010 Gear Parts Manual

$20
Add to cart
-50%
Mahindra Tractor 00 Series 4500 5500 6000 6500 Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 0 Series 2WD 4500 5500 6000 6500 Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 10 Series 4010 HST Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 4010 HST Parts Manual

$20
Add to cart