John Deere D120 and H120 Loader Operator Manual OMPXX10184

John Deere D120 and H120 Loader Operator Manual OMPXX10184-2

John Deere D120 and H120 Loader Operator Manual OMPXX10184-3

John Deere D120 and H120 Loader Operator Manual OMPXX10184

Type Of Manual: Operator Manual
Manual ID: OMPXX10184
Format: PDF
Size: 3.4MB
Number of Pages: 72

Category: John Deere Operators Manuals PDF Tag: Agricultural

Description

Model List:
- D120 Loader
- H120 Loader

1. Introduction
1.1. Foreword
2. General Information
2.1. Machine Overview
2.2. Product View
2.3. Trademarks
2.4. Abbreviations
2.5. Regions and Country Versions
2.6. Dealers Record
2.7. Predelivery
2.8. Delivery
2.9. AfterSale
2.10. Record Product Identification Number
2.11. Keep Proof of Ownership
2.12. Keep Machines Secure
2.13. Recognize Safety Information
2.14. Understand Signal Words
2.15. Follow Safety Instructions
2.16. Prepare for Emergencies
2.17. Wear Protective Clothing
2.18. Park Machine Safely
2.19. Protect People and Animals
2.20. Operating the Loader Tractor Safely
2.21. Use Seat Belt Properly
2.22. Use Foldable ROPS and Seat Belt Properly
2.23. Use Caution on Slopes, Uneven Terrain, and Rough Ground
2.24. Avoid Injury or Death from Falling Loads
2.25. Carry Materials Safely
2.26. Driving on Public Roads
2.27. Operating Loader with Attachments from Other Manufacturers
2.28. Operate Bucket/Attachment Safely
2.29. Operating NonSelfLevelling Loaders
2.30. Avoid Power Lines
2.31. Dig Safely
2.32. Detach Loader Safely
2.33. Use Safety Lights and Devices
2.34. Practice Safe Maintenance
2.35. Service Loader Safely
2.36. Service Machines Safely
2.37. Service Accumulator Systems Safely
2.38. Avoid Heating Near Pressurized Fluid Lines
2.39. Check Hoses for Damage
2.40. Avoid HighPressure Fluids
2.41. Remove Paint Before Welding or Heating
2.42. Decommissioning Proper Recycling and Disposal of Fluids and Components
3. Safety Signs
3.1. Replace Safety Signs
3.2. Avoid HighPressure Spray on Safety Decals
3.3. Mast, RightHand Side and Boom (H120 Loader)
3.4. Mast, LeftHand Side (H120 Loader)
3.5. Bucket (H120 Loader)
3.6. Ballast Box (H120 Loader)
3.7. Mast, RightHand Side and Boom (D120 Loader)
3.8. Mast, LeftHand Side (D120 Loader)
3.9. Bucket (D120 Loader)
3.10. Ballast Box (D120 Loader)
4. Prepare Tractor
4.1. Prepare the Tractor
4.2. Rear Ballast
4.3. Approved Tractors
4.4. Approved Tires and Ballast for 1023E, 1025R, and 1026R Tractors
4.5. Remove Front Weights
4.6. Set Tread Width
4.7. Inflate Front Tires
4.8. Check Front Wheel Hardware
4.9. Install Hitch Pin Bushings on Ballast Box for Category 1 QuickHitch
4.10. Attach Ballast Box to Tractor with 3Point Hitch
4.11. Attach Ballast Box to Tractor with QuickHitch
4.12. Add Ballast to 3Point Hitch
5. Detach Loader
5.1. Remove Ballast Box
5.2. Detach H120 Loader
5.3. Detach D120 Loader
6. Attach Loader
6.1. Attach H120 Loader
6.2. Attach D120 Loader
6.3. Check Loader Operation
7. Transport
7.1. Keep Riders Off Machine
7.2. Driving on Public Roads
7.3. Carry Loads
8. Operate Loader
8.1. PreOperational Inspection
8.2. Use Ballast Box
8.3. Avoid Rollover Accidents
8.4. Do Not Handle Round or Large Square Bales
8.5. Loader Controls
8.6. Use Bucket Level Indicator
8.7. Loader Operations
8.8. Level and Scrape Forward
8.9. Level in Reverse
8.10. Carry Material
8.11. Remove Material from a Pile
8.12. Backfill
8.13. Detach and Attach QuikChange Attachments
8.14. Attach and Detach PinOn Bucket (If Equipped)
8.15. Attachments Available
9. Lubrication and Maintenance
9.1. Lubricate and Maintain Loader Safely
9.2. Perform Lubrication and Maintenance
9.3. Observe Lubrication Symbols
9.4. Multipurpose Extreme Pressure (EP) Grease
9.5. Alternative and Synthetic Lubricants
9.6. First 10 Hours
9.7. Every 10 Hours
9.8. Every 50 Hours
9.8.1. Check and Tighten Hardware
9.8.2. Check Transmission and Hydraulic Oil Level
10. Service
10.1. Service Loader and/or Tractor Safely (Loader Attached)
10.2. Work in Clean Area
10.3. Avoid HighPressure Fluids
10.4. Loader Hanging Points
10.5. ORing Installation
10.6. Tighten Hydraulic Fittings and Hoses
10.7. Identify Hose Connections
10.8. Replace Orifice
10.9. Adjust Bucket Level Indicator
10.10. Metric Bolt and Screw Torque Values
10.11. Unified Inch Bolt and Screw Torque Values
11. Specifications
11.1. D120 Loader Specifications on 1023E and 1026R Tractors
11.2. H120 Loader Specifications on 1023E and 1026R Tractors
12. CE Approval Specification
12.1. Install TextFree Safety Decals
12.2. EC Declaration of ConformityD120
12.3. EC Declaration of ConformityH120
12.4. CE Label
13. John Deere Service Keeps You On The Job
13.1. John Deere Parts
13.2. The Right Tools
13.3. WellTrained Technicians
13.4. Prompt Service

John Deere D120 and H120 Loader Operator Manual OMPXX10184

Description

Related products

Login