Manitou 220 TJ, 220 TJ- Operator Manual 647641EN

Manitou 220 TJ, 220 TJ- Operator Manual 647641EN - Image 2

Manitou 220 TJ, 220 TJ- Operator Manual 647641EN - Image 3

Manitou 220 TJ, 220 TJ- Operator Manual 647641EN - Image 4

Manitou 220 TJ, 220 TJ- Operator Manual 647641EN - Image 5

manitou 220 tj 220 tj operator manual 647641en 2

manitou 220 tj 220 tj operator manual 647641en 3

Manitou 220 TJ, 220 TJ- Operator Manual 647641EN

Type Of Manual: Operator Manual
Manual ID: 647641EN
Format: PDF
Size: 9.6MB
Number of Pages: 176

Category: Manitou Operator Manual PDF

Description

Model List:
- 220 TJ
- 220 TJ-

1. OPERATING AND SAFETY INSTRUCTIONS
1.1. INSTRUCTIONS TO THE COMPANY MANAGER
1.1.1. THE SITE
1.1.2. THE OPERATOR
1.1.3. PLATFORM
1.1.3.1. A SUITABILITY OF THE PLATFORM FOR THE TASK
1.1.3.2. B ADAPTING THE PLATFORM TO USUAL ENVIRONMENTAL CONDITIONS
1.1.3.3. C MODIFYING THE PLATFORM
1.1.4. INSTRUCTIONS
1.1.5. MAINTENANCE
1.2. INSTRUCTIONS FOR THE OPERATOR
1.2.1. INTRODUCTION
1.2.2. GENERAL INSTRUCTIONS
1.2.2.1. A INSTRUCTION MANUAL
1.2.2.2. B AUTHORISATION FOR USE IN FRANCE
1.2.2.3. C MAINTENANCE
1.2.2.4. D MODIFYING THE PLATFORM
1.2.2.5. E DIESEL PLATFORM AXLES
1.2.2.6. F SAFETY DEVICES
1.2.3. OPERATING INSTRUCTIONS
1.2.3.1. A BEFORE STARTINGUP THE PLATFORM
1.2.3.2. B DRIVERS OPERATING INSTRUCTIONS
1.2.3.3. C ENVIRONMENT
1.2.3.4. D VISIBILITY
1.2.3.5. E STARTINGUP THE ENGINEPOWERED PLATFORM
1.2.3.6. F STARTING UP THE ELECTRICPOWERED PLATFORM
1.2.3.7. G OPERATING THE PLATFORM
1.2.3.8. H STOPPING THE PLATFORM
1.2.4. INSTRUCTIONS FOR WELDING AND BLOW TORCH WORK ON AN EXTERNAL STRUCTURE
1.2.4.1. A WITH AN ELECTRICAL WELDING SET
1.2.4.2. B WITH A BLOW TORCH
1.3. PLATFORM MAINTENANCE INSTRUCTIONS
1.3.1. GENERAL INSTRUCTIONS
1.3.2. MAINTENANCE
1.3.3. LUBRICANT AND FUEL LEVELS
1.3.4. BATTERY ELECTROLYTE LEVEL (ELECTRIC PLATFORM)
1.3.5. HYDRAULICS
1.3.6. ELECTRICITY
1.3.7. TILT SENSOR
1.3.8. WELDING ON THE ACCESS PLATFORM
1.3.9. WASHING THE PLATFORM
1.4. IF THE PLATFORM IS NOT TO BE USED FOR A LONG TIME
1.4.1. INTRODUCTION
1.4.2. PREPARING THE PLATFORM
1.4.3. PROTECTING THE ENGINE (DIESEL PLATFORM)
1.4.4. BATTERY CHARGING (ELECTRIC PLATFORM)
1.4.5. PROTECTING THE PLATFORM
1.4.6. BRINGING THE PLATFORM BACK INTO SERVICE
1.5. DISPOSING OF THE PLATFORM
1.5.1. RECYCLING OF MATERIALS
1.5.1.1. METALS
1.5.1.2. PLASTICS
1.5.1.3. RUBBER
1.5.1.4. GLASS
1.5.2. ENVIRONMENTAL PROTECTION
1.5.2.1. WORN OR DAMAGED PARTS
1.5.2.2. USED OIL
1.5.2.3. USED BATTERIES
2. DESCRIPTION
2.1. CE DECLARATION OF CONFORMITY
2.2. STICKERS
2.3. IDENTIFICATION OF THE PLATFORM
2.4. SPECIFICATIONS
2.5. DIMENSIONS AND DIAGRAM 220 TJ
2.6. DIMENSIONS AND DIAGRAM 220 TJ
2.7. SAFETY COMPONENTS
2.8. CONTROL PANEL AND SAFETY DEVICES AT GROUND LEVEL
2.9. CONTROL PANEL AND SAFETY DEVICES IN THE BASKET
2.10. REMOTE CONTROL UNIT
2.11. SCREEN DISPLAY DESCRIPTION OF PAGES
2.12. DEFINITION OF SUBMENUS
2.13. OPERATING THE PLATFORM
2.14. TRANSPORTING THE PLATFORM
2.15. RESCUE PROCEDURE
2.16. OPTIONS
3. MAINTENANCE
3.1. INTRODUCTION
3.2. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
3.3. DAILY AND MONTHLY MAINTENANCE
3.4. MANDATORY SERVICING AND PERIODIC MAINTENANCE
3.5. OCCASIONAL MAINTENANCE AND OCCASIONAL OPERATIONS
3.6. FILTER CARTRIDGES AND BELTS
3.7. LUBRICANTS AND FUEL
3.8. Ü 10H DAILY MAINTENANCE OR EVERY 10 HOURS OF SERVICE
3.9. Ü 50H MONTHLY MAINTENANCE OR EVERY 50HOURS OF SERVICE
3.10. Ü 250H PERIODIC MAINTENANCE EVERY 250 HOURS OF SERVICE OR 6 MONTHS
3.11. Ü 500H PERIODIC MAINTENANCE EVERY 500 HOURS OF SERVICE OR 1 YEAR
3.12. Ü 1000H PERIODIC MAINTENANCE EVERY 1,000 HOURS OF SERVICE OR 2 YEARS
3.13. Ü 2000H PERIODIC MAINTENANCE EVERY 2,000 HOURS OF SERVICE OR 4 YEARS
3.14. Ü 6000H PERIODIC MAINTENANCE EVERY 6,000 HOURS OF SERVICE OR 12 YEARS
3.15. Ü OCCASIONAL MAINTENANCE
3.16. Ü OCCASIONAL OPERATIONS
4. ATTACHMENTS
4.1. PIPE SUPPORT Part No. 52571261OPT
4.2. PANEL SUPPORT Part No. 52571261OPT

Manitou 220 TJ, 220 TJ- Operator Manual 647641EN

Description

Related products

Login