-
Model List:
- A4VG Series 40 Pump
- 1. About this manual
- 1.1. Related documents
- 1.2. Abbreviations used
- 2. General safety instructions
- 2.1. Intended use
- 2.2. Improper use
- 2.3. Personnel qualifications
- 2.4. Safety instructions in this manual
- 2.5. Adhere to the following instructions
- 2.6. Operators obligations
- 3. Product description
- 3.1. Name plate
- 3.2. Functional description
- 3.3. Technical data
- 4. Controller
- 4.1. Removing controller
- 4.2. Sealing controller
- 4.3. Installing the controller
- 4.4. Setting controller (hydraulic neutral position)
- 5. Internal gear pump
- 5.1. Remove internal gear pump cover
- 5.2. Seal/install internal gear pump cover
- 6. Shaft seal
- 6.1. Exchange shaft seal
- 7. Valves
- 7.1. Seal/replace the high pressure relief valve
- 7.2. Seal/replace low pressure relief valve
- 7.3. Seal/replace pressure cutoff
- 7.3.1. Set pressure cutoff
- 7.4. Seal control cartridge
- 7.4.1. Set beginning of control
- 7.5. Seal shuttle valve
- 7.6. Exchange angle position sensor
- 8. Filter
- 8.1. Mountable filter
- 8.2. Seal/replace filter head
- 9. Threaded plugs
- 9.1. Seal/replace threaded plugs
- 10. Settings
- 10.1. Low pressure
- 10.2. High pressure
- 10.3. Tightening torques








