Manitou MLT-X 741 140 V PLUS D ST3A S1 Operator Manual 647775EN
$20
- Type Of Manual: Operator Manual
- Manual ID: 647775EN
- Format: PDF
- Size: 8.4MB
- Number of Pages: 168
Description
-
Model List:
- MLT-X 741 140 V PLUS D ST3A S1
- 1. OPERATING AND SAFETY INSTRUCTIONS
- 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1.1. THE SITE
- 1.1.2. THE OPERATOR
- 1.1.3. THE LIFT TRUCK
- 1.1.3.1. A SUITABILITY OF THE LIFT TRUCK FOR THE JOB
- 1.1.3.2. B ADAPTATION OF THE LIFT TRUCK TO STANDARD ENVIRONMENTAL CONDITIONS
- 1.1.3.3. C MODIFICATION OF THE LIFT TRUCK
- 1.1.3.4. D FRENCH ROAD TRAFFIC RULES
- 1.1.3.5. E LIFT TRUCK CAB PROTECTION
- 1.1.4. INSTRUCTIONS
- 1.1.5. MAINTENANCE
- 1.2. INSTRUCTIONS FOR THE OPERATOR
- 1.2.1. FOREWORD
- 1.2.2. GENERAL INSTRUCTIONS
- 1.2.2.1. A OPERATORS MANUAL
- 1.2.2.2. B AUTHORISATION FOR USE IN FRANCE
- 1.2.2.3. C MAINTENANCE
- 1.2.2.4. D TYRES
- 1.2.2.5. E MODIFICATION OF THE LIFT TRUCK
- 1.2.2.6. F LIFTING PEOPLE
- 1.2.3. OPERATING INSTRUCTIONS UNLADEN AND LADEN
- 1.2.3.1. A BEFORE STARTING THE LIFT TRUCK
- 1.2.3.2. B AVAILABLE IN THE DRIVERS CAB
- 1.2.3.3. C ENVIRONMENT
- 1.2.3.4. D VISIBILITY
- 1.2.3.5. E STARTING THE LIFT TRUCK
- 1.2.3.6. F DRIVING THE LIFT TRUCK
- 1.2.3.7. G STOPPING THE LIFT TRUCK
- 1.2.3.8. H DRIVING THE LIFT TRUCK ON THE PUBLIC HIGHWAY
- 1.2.4. INSTRUCTIONS FOR HANDLING A LOAD
- 1.2.4.1. A CHOICE OF ATTACHMENTS
- 1.2.4.2. B WEIGHT OF LOAD AND CENTRE OF GRAVITY
- 1.2.4.3. C LONGITUDINAL STABILITY LIMITER AND WARNING DEVICE
- 1.2.4.4. D TRANSVERSE ATTITUDE OF THE LIFT TRUCK
- 1.2.4.5. E PICKING UP A LOAD ON THE GROUND
- 1.2.4.6. F PICKING UP AND PUTTING DOWN A HIGH LOAD ON TYRES
- 1.2.4.7. G PICKING UP AND PUTTING DOWN A HIGH LOAD ON STABILISERS
- 1.2.4.8. H PICKING UP AND PUTTING DOWN A SUSPENDED LOAD
- 1.2.4.9. I TRAVELLING WITH A SUSPENDED LOAD
- 1.2.5. INSTRUCTIONS FOR USE AS A LOADER
- 1.2.5.1. A LOADING
- 1.2.5.2. B BACKFILLING
- 1.2.6. PLATFORM OPERATING INSTRUCTIONS
- 1.2.6.1. A AUTHORISATION FOR USE
- 1.2.6.2. B SUITABILITY OF THE PLATFORM FOR THE JOB
- 1.2.6.3. C PROVIDED ON THE PLATFORM
- 1.2.6.4. D USING THE PLATFORM
- 1.2.6.5. E ENVIRONMENT
- 1.2.6.6. F MAINTENANCE
- 1.2.7. INSTRUCTIONS FOR USING THE RADIOCONTROL
- 1.2.7.1. HOW TO USE THE RADIOCONTROL
- 1.2.7.2. PROTECTIVE DEVICES
- 1.3. LIFT TRUCK MAINTENANCE INSTRUCTIONS
- 1.3.1. GENERAL INSTRUCTIONS
- 1.3.2. PLACING THE BOOM SAFETY WEDGE
- 1.3.2.1. FITTING THE WEDGE
- 1.3.2.2. REMOVING THE WEDGE
- 1.3.3. MAINTENANCE
- 1.3.3.1. MAINTENANCE LOGBOOK
- 1.3.4. LUBRICANT AND FUEL LEVELS
- 1.3.5. HYDRAULICS
- 1.3.6. ELECTRICITY
- 1.3.7. WELDING
- 1.3.8. WASHING THE LIFT TRUCK
- 1.3.9. TRANSPORTING THE LIFT TRUCK
- 1.4. IF THE LIFT TRUCK IS NOT TO BE USED FOR A LONG TIME
- 1.4.1. INTRODUCTION
- 1.4.2. PREPARING THE LIFT TRUCK
- 1.4.3. DEF (Diesel Exhaust Fluid) TANK
- 1.4.4. PROTECTING THE ENGINE
- 1.4.5. PROTECTING THE LIFT TRUCK
- 1.4.6. BRINGING THE LIFT TRUCK BACK INTO SERVICE
- 1.5. LIFT TRUCK DISPOSAL
- 1.5.1. RECYCLING OF MATERIALS
- 1.5.1.1. METALS
- 1.5.1.2. PLASTICS
- 1.5.1.3. RUBBER
- 1.5.1.4. GLASS
- 1.5.2. ENVIRONMENTAL PROTECTION
- 1.5.2.1. WORN OR DAMAGED PARTS
- 1.5.2.2. USED OIL
- 1.5.2.3. USED BATTERIES
- 2. DESCRIPTION
- 2.1. SAFETY PLATES AND STICKERS
- 2.2. IDENTIFICATION OF THE LIFT TRUCK
- 2.3. CHARACTERISTICS
- 2.4. TYRES
- 2.5. DIMENSIONS AND LOAD CHARTS
- 2.6. VISIBILITY
- 2.7. INSTRUMENTS AND CONTROLS
- 2.8. TOWING DEVICE
- 2.9. DESCRIPTION AND USE OF THE OPTIONS
- 3. MAINTENANCE
- 3.1. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 3.2. FORKLIFT TRUCK MAINTENANCE
- 3.3. DAILY AND WEEKLY MAINTENANCE
- 3.4. MANDATORY FIRST 500 HOURS OR 6 MONTHS SERVICE
- 3.5. PERIODIC MAINTENANCE
- 3.6. OCCASIONAL MAINTENANCE AND OPERATION
- 3.7. FILTERS ELEMENTS AND BELTS
- 3.8. LUBRICANTS AND FUEL
- 3.9. Ü 10H DAILY MAINTENANCE OR EVERY 10 HOURS OF SERVICE
- 3.10. Ü 50H WEEKLY MAINTENANCE OR EVERY 50 HOURS OF SERVICE
- 3.11. Ü 500H PERIODIC MAINTENANCE EVERY 500HOURS OF SERVICE OR 1 YEAR
- 3.12. Ü 1000H PERIODIC MAINTENANCE EVERY 1000 HOURS OF SERVICE OR 2 YEARS
- 3.13. Ü 2000H PERIODIC MAINTENANCE EVERY 2000 HOURS OF SERVICE OR 4 YEARS
- 3.14. Ü OCCASIONAL MAINTENANCE
- 3.15. Ü OCCASIONAL OPERATION
- 4. OPTIONAL ADAPTABLE ATTACHMENTS FOR THE RANGE
- 4.1. INTRODUCTION
- 4.2. PICKING UP THE ATTACHMENTS
- 4.3. TECHNICAL SPECIFICATIONS OF ATTACHMENTS
- 4.4. ATTACHMENT GUARDS
Related products
Manitou Operator Manual PDF
Manitou 1050RT, 1050RT (EU), 1050RT X-Series Compact Track Loader Operator Manual 50950436 Rev. H
$20
Manitou Operator Manual PDF
Manitou 150 ATT, 170 ATT Access Platform Operator Manual Operator Manual
$20
Manitou Operator Manual PDF
Manitou 1350R NXT2 to 1500R NXT2 X-Series Skid-Steer Loader Operator Manual 50950504
$20
