Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US

Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US - Image 2

Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US - Image 3

Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US - Image 4

Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US - Image 5

manitou tj 65 2rd t4 s1 tj 65p 4rd t4 s1 operator manual 647736 us 2

manitou tj 65 2rd t4 s1 tj 65p 4rd t4 s1 operator manual 647736 us 3

Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US

Type Of Manual: Operator Manual
Manual ID: 647736 US
Format: PDF
Size: 9.6MB
Number of Pages: 180

Category: Manitou Operator Manual PDF

Description

Model List:
- TJ 65 2RD T4 S1
- TJ 65P 4RD T4 S1

1. SAFETY PRECAUTIONS
1.1. GENERAL
1.1.1. FALL HAZARDS
1.1.2. ELECTROCUTION HAZARDS
1.1.3. TIPOVER HAZARDS
1.1.4. COLLISION AND CRUSHING HAZARDS
1.1.5. POISONING HAZARDS
1.1.6. INSPECTION AND MAINTENANCE HAZARDS
1.1.7. BATTERIES HAZARDS
2. INSTRUCTIONS
2.1. INSPECTIONS
2.1.1. GENERAL
2.1.2. WALKAROUND INSPECTION AND ROUTINE MAINTENANCE
2.1.2.1. INTRODUCTION
2.1.2.2. PROCEDURE
2.1.3. FUNCTION TESTS
2.1.3.1. INTRODUCTION
2.1.3.2. TEST THE GROUND CONTROLS AND THE ALARMS
2.1.3.3. TEST THE PLATFORM CONTROLS AND THE ALARMS
2.1.4. WORKPLACE INSPECTION
2.1.4.1. INTRODUCTION
2.1.4.2. PROCEDURE
2.2. COMPONENTS LOCATION
2.3. DECALS LOCATION USA
2.4. DECALS LOCATION CANADA
2.5. SAFETY COMPONENTS
2.5.1. SWING GATE AND SLIDING MIDRAILS
2.5.2. LANYARD ANCHORAGE POINTS
2.5.3. TURNTABLE LOCK PIN
2.6. MACHINE CONTROLS
2.6.1. GROUND CONTROLS PANEL AND GROUND SAFETY DEVICES
2.6.2. PLATFORM CONTROLS PANEL AND PLATFORM SAFETY DEVICES
2.6.3. REMOTE CONTROL UNIT
2.6.4. LCD READOUT SCREEN PAGES
2.6.4.1. STARTUP PAGE
2.6.4.2. PREHEATING PAGE
2.6.4.3. ENGINE START PAGE
2.6.4.4. MENU PAGE
2.6.4.5. EDIT A SUB MENU
2.6.4.6. WORK PAGE
2.6.4.7. FAULT PAGE
2.6.4.8. WARNING PAGE
2.6.4.9. FAULT/WARNING CODE PAGE
2.6.4.10. MENUS/SUBMENUS
2.7. OPERATING INSTRUCTIONS
2.7.1. GENERAL
2.7.2. TRANSPORT/WORK POSITION
2.7.2.1. TRANSPORT POSITION
2.7.2.2. WORK POSITION
2.7.3. OPERATE FROM THE GROUND CONTROLS PANEL
2.7.3.1. POWER UP THE MACHINE
2.7.3.2. POWER DOWN THE MACHINE
2.7.3.3. START THE ENGINE
2.7.3.4. STOP THE ENGINE
2.7.3.5. POSITION THE PLATFORM
2.7.3.6. EMERGENCY STOP
2.7.4. OPERATE FROM THE PLATFORM CONTROLS PANEL
2.7.4.1. POWER UP AND POWER DOWN THE MACHINE
2.7.4.2. START THE ENGINE
2.7.4.3. STOP THE ENGINE
2.7.4.4. DRIVE, STEER AND BRAKE
2.7.4.5. POSITION THE PLATFORM
2.7.4.6. EMERGENCY STOP
2.7.5. OPERATE FROM THE REMOTE CONTROL UNIT
2.7.5.1. POWER UP AND POWER DOWN THE MACHINE
2.7.5.2. START THE ENGINE
2.7.5.3. POSITION THE PLATFORM
2.7.5.4. STOP THE ENGINE
2.7.6. SIMULTANEOUS FUNCTIONS
2.7.6.1. GROUND CONTROLS PANEL
2.7.6.2. PLATFORM CONTROLS PANEL
2.7.6.3. REMOTE CONTROL UNIT
2.7.7. DRIVING ON A SLOPE
2.7.7.1. MEASURE THE SLOPE GRADE
2.7.8. LOCKED FUNCTIONS
2.7.8.1. TRANSPORT POSITION
2.7.8.2. WORK POSITION
2.7.9. RESCUE CONTROLS
2.7.9.1. IF THE ENGINE IS FUNCTIONAL
2.7.9.2. IF THE ENGINE IS NOT FUNCTIONAL
2.7.10. STANDARD EQUIPMENT
2.7.10.1. FRONT OSCILLATING AXLE
2.7.10.2. BATTERY MASTER SWITCH
2.7.10.3. DOUBLE 110 V ELECTRICAL OUTLET IN THE PLATFORM
2.7.10.4. BLOCK HEATER
2.7.11. OPTIONS
2.7.11.1. BATTERY HEATER
2.7.11.2. HYDRAULIC OIL HEATER
2.7.11.3. V/208 V GENERATOR
2.7.11.4. V GENERATOR
2.7.11.5. WORK LIGHT
2.7.11.6. SECONDARY GUARDING SYSTEM SAFEMANSYSTEM
2.8. PARKING AND STORAGE
2.9. TRANSPORTATION AND LIFTING
2.9.1. GENERAL
2.9.2. TRANSPORTATION INSTRUCTIONS
2.9.2.1. LOAD AND UNLOAD THE MACHINE
2.9.2.2. SET THE MACHINE FOR TRANSPORTATION
2.9.2.3. TIE DOWN THE MACHINE
2.9.2.4. TURNTABLE LOCK PIN
2.9.2.5. FREEWHEEL CONFIGURATION FOR WINCHING
2.9.3. LIFTING INSTRUCTIONS
2.10. CHARACTERISTICS
2.11. DIMENSIONS AND RANGE OF MOTION CHART TJ 65 2RD T4 S1
2.12. DIMENSIONS AND RANGE OF MOTION CHART TJ 65P 4RD T4 S1
3. MAINTENANCE
3.1. GENERAL
3.2. PERIODIC MAINTENANCES
3.3. MANDATORY MAINTENANCES AND SCHEDULED MAINTENANCE
3.4. OCCASIONAL MAINTENANCE AND OCCASIONAL OPERATION
3.5. FILTER ELEMENTS AND BELTS
3.6. LUBRICANTS, COOLANT AND FUEL
3.7. Ü ROUTINE MAINTENANCE
3.8. Ü EVERY 50 OPERATING HOURS OR EVERY MONTH
3.9. Ü EVERY 250 OPERATING HOURS OR EVERY 6 MONTHS
3.10. Ü EVERY 500 OPERATING HOURS OR EVERY YEAR
3.11. Ü EVERY 1000 OPERATING HOURS OR EVERY 2 YEARS
3.12. Ü EVERY 2000 OPERATING HOURS OR EVERY 4 YEARS
3.13. Ü EVERY 5 YEARS
3.14. Ü OCCASIONAL MAINTENANCE
3.15. Ü OCCASIONAL OPERATION
4. ACCESSORIES
4.1. PIPE CRADLE
4.1.1. INTRODUCTION
4.1.2. DECALS LOCATION
4.1.3. INSTALLATION
4.1.4. DISASSEMBLING
4.1.5. OPERATING INSTRUCTIONS
4.1.6. SETTING
4.2. PANEL CRADLE
4.2.1. INTRODUCTION
4.2.2. DECALS LOCATION
4.2.3. INSTALLATION
4.2.4. DISASSEMBLING
4.2.5. OPERATING INSTRUCTIONS

Manitou TJ 65 2RD T4 S1, TJ 65P 4RD T4 S1 Operator Manual 647736 US

Description

Related products

Login