John Deere DN200 and DN300 Spreader Operator Manual 5NL309744
John Deere DN200 and DN300 Spreader Operator Manual 5NL309744-2
John Deere DN200 and DN300 Spreader Operator Manual 5NL309744-3
John Deere DN200 and DN300 Spreader Operator Manual 5NL309744-2
John Deere DN200 and DN300 Spreader Operator Manual 5NL309744-3

John Deere DN200 and DN300 Spreader Operator Manual 5NL309744

$30

  • Type Of Manual: Operator Manual
  • Manual ID: 5NL309744
  • Format: PDF
  • Size: 7.1MB
  • Number of Pages: 202
Category: Tag:
Description
  • Model List:

    • DN200 Spreader
    • DN300 Spreader
  • 1. Contents
  • 1.0.1. Recognize Safety Information
  • 1.0.2. Understand Signal Words
  • 1.0.3. Follow Safety Instructions
  • 1.0.4. Prepare for Emergencies
  • 1.0.5. Wear Protective Clothing
  • 1.0.6. Protect Against Noise
  • 1.0.7. Practice Safe Maintenance
  • 1.0.8. Park Machine Safely
  • 1.0.9. Remove Paint Before Welding or Heating
  • 1.0.10. Avoid Heating Near Pressurized Fluid Lines
  • 1.0.11. Avoid HighPressure Fluids
  • 1.0.12. Check Hydraulic Hoses
  • 1.0.13. Dispose of Waste Properly
  • 1.0.14. Handle Chemical Products Safely
  • 1.0.15. Service Spreader Equipment Safely
  • 1.0.16. Use Proper Tools
  • 1.0.17. Work In Ventilated Area
  • 1.0.18. Handling Batteries Safely
  • 1.0.19. Service Drive Belts Safely
  • 1.0.20. Using Compressed Air For Cleaning
  • 1.0.21. Maintain a Safety Area Around the Machine
  • 1.0.22. Working Area
  • 1.0.23. Avoid Backover Accidents
  • 1.0.24. Before Operating
  • 1.0.25. Operate Safely
  • 1.0.26. Avoid Injury from Thrown Objects
  • 1.0.27. Use Safety Lights and Devices
  • 1.0.28. Keep Riders Off Machine
  • 1.0.29. Machine fitted with Instructional Seat
  • 1.0.30. Use Seat Belt Properly
  • 1.0.31. Use Caution On Hillsides
  • 1.0.32. Transport and Operate Safely
  • 1.0.33. Prevent Machine Runaway
  • 1.0.34. Handle Fuel SafelyAvoid Fires
  • 1.0.35. Handle Agricultural Chemicals Safely
  • 1.0.36. Spreading Dusty Materials
  • 1.0.37. Avoid Exposure To Chemicals
  • 1.0.38. Clean Vehicle of Hazardous Chemicals, Including Pesticides
  • 1.0.39. NonPermissible Use
  • 1.0.40. Emergency Exit
  • 1.1. Safety Signs Location
  • 1.1.1. Replace Safety Signs
  • 1.1.2. Safety Signs
  • 1.2. Installation Instructions
  • 1.2.1. Remove Rear Light BarIf Equipped
  • 1.2.2. Install Dry Spreader Body
  • 1.2.3. Attach Harness Connectors
  • 1.2.4. Install Hydraulic Hoses
  • 1.2.5. Hose Installation Guide
  • 1.2.6. Install Light Bracket
  • 1.2.7. Install Beacon Light Kit (Optional)
  • 1.2.8. Install Additional Mirrors and Mirror Brackets
  • 1.2.9. Install Inverted VDN200
  • 1.2.10. Install Inverted VDN300
  • 1.2.11. Install Second Product Bin
  • 1.2.12. Install Second Product Bin Hillside Divider
  • 1.2.13. Install Dual Conveyor Cover
  • 1.2.14. Remove Second Product Bin and Install Endgate
  • 1.3. Safety Features
  • 1.3.1. Safety Features
  • 1.4. SpreadstarSpreadstar is a trademark of Deere Company
  • 1.4.1. Introduction to SpreadStar
  • 1.4.2. Spreader Main Page
  • 1.4.3. Bin Status Icons
  • 1.4.4. Spreader Main Page Information Drop Down Lists
  • 1.4.5. Spreader Bin Setup
  • 1.4.6. Turning Spinner Alarm On/Off
  • 1.4.7. Turning Rate Alarm On/Off
  • 1.4.8. Turning Density Setting Alarm On/Off
  • 1.4.9. Operate Bin Chaining
  • 1.4.10. Spreader Product Setup
  • 1.4.11. Setting Application Rates
  • 1.4.12. Setting Product Density
  • 1.4.13. Setting Product CFR
  • 1.4.14. Spreader Machine Setup
  • 1.4.15. Select Single or Dual Bin Platform
  • 1.4.16. Vehicle Setup and Calibration
  • 1.4.17. Job Summaries and Current Totals
  • 1.4.18. Setup Summary
  • 1.4.19. Calibrate Product CFR
  • 1.4.20. Spinner Calibration
  • 1.4.21. Spreader Check Test
  • 1.4.22. Diagnostic Readings
  • 1.4.23. Diagnostic Tests
  • 1.4.24. Recent Problems
  • 1.4.25. Controller Diagnostics
  • 1.4.26. Setup of Prescriptions with SpreadStar
  • 1.4.27. Calculate Feedgate Opening
  • 1.4.28. SpreadStar Warning Statements
  • 1.4.29. Stop Warnings
  • 1.4.30. Message Center Cautions and Warnings
  • 1.4.31. Information (Protect) Messages
  • 1.5. PreStarting Checks
  • 1.5.1. Informational Decal
  • 1.5.2. Verify Spinner Orientation
  • 1.5.3. Squaring Spinner Frame
  • 1.5.4. Verify Material Divider Position
  • 1.5.5. Install Material DeflectorOptional
  • 1.5.6. Verify Spinner Fin Installation
  • 1.5.7. Verify Spinner Speed Sensor Gap
  • 1.5.8. Verify Hillside Divider Location
  • 1.5.9. Verify Second Product Bin Hillside Divider Location
  • 1.5.10. Verify Correct Chain TensionDN200
  • 1.5.11. Verify Correct Belt TensionDN300
  • 1.5.12. Spinner Initial Settings
  • 1.6. Operate System
  • 1.6.1. Initial StartUp
  • 1.6.2. Field Testing
  • 1.6.3. Spreader System Check
  • 1.6.4. Setup SpreadStar Display
  • 1.6.5. Calibrating Wheel Speed Sensor
  • 1.6.6. Calibrating Radar Sensor (Optional)
  • 1.6.7. Spinner Calibration
  • 1.6.8. General Operating Process
  • 1.7. Size Grading and Hardness Testing
  • 1.7.1. Introduction
  • 1.7.2. Crushing Strength
  • 1.7.3. Hardness Test
  • 1.7.4. Size Grade Number
  • 1.7.5. Size Grade Number Scale
  • 1.8. Spread Pattern
  • 1.8.1. Spread Pattern Adjustment
  • 1.8.2. Spinners
  • 1.8.3. Spreader Preparation
  • 1.8.4. Determine Material Bulk Density
  • 1.8.5. Determine Material CFR
  • 1.8.6. Spread Pattern Test Procedure
  • 1.8.7. Troubleshooting
  • 1.9. Lubrication and Maintenance
  • 1.9.1. Clean Vehicle of Hazardous Chemicals, Including Pesticides
  • 1.9.2. Prevent Hydraulic System Contamination
  • 1.9.3. Dispose of Waste Properly
  • 1.9.4. Service Intervals
  • 1.9.5. Conveyor Belt CleanoutAs Required
  • 1.9.6. DN300 Conveyor Belt Maintenance and Adjustment As Required
  • 1.9.7. DN200 Conveyor Chain and Belt Maintenance and AdjustmentAs Requ
  • 1.9.8. Install Replacement Spreader FinsAs Required
  • 1.9.9. Lubricate Second Product Bin ChainDaily
  • 1.9.10. Lubricate Idler Shaft Bearings and Adjustment ScrewsWeekly
  • 1.9.11. Lubricate Snubber and Drive Shaft BearingsWeekly
  • 1.9.12. Lubricate Spinner JackWeekly
  • 1.9.13. Lubricate Second Product Bin Drive and Idler Shaft BearingsWeek
  • 1.9.14. Lubricate Feedgate Jack Tube (if equipped)Weekly
  • 1.9.15. Check Gear Case OilMonthly
  • 1.9.16. Change Gear Case OilAnnually
  • 1.9.17. Lubricate Feedgate Jack Gears (if equipped)Annualy
  • 1.10. Lubricant Specifications
  • 1.10.1. Hydrostatic/Hydraulic Drive Oil
  • 1.10.2. Gear Case Oil
  • 1.10.3. Chain Oiler Mixture
  • 1.11. Troubleshooting
  • 1.11.1. Troubleshooting
  • 1.11.2. Hydraulic Schematic
  • 1.11.3. Conveyor Relief Valve Pressure Test
  • 1.12. Storage
  • 1.12.1. Avoid Exposure To Chemicals
  • 1.12.2. Clean Vehicle of Hazardous Chemicals, Including Pesticides
  • 1.12.3. Preparing Machine for Storage
  • 1.12.4. Removing Machine from Storage
  • 1.13. Specifications
  • 1.13.1. Specifications DN200
  • 1.13.2. Specifications DN300
  • 1.13.3. Dimensions DN200
  • 1.13.4. Dimensions DN300
  • 1.13.5. Unified Inch Bolt and Screw Torque Values
  • 1.13.6. Metric Bolt and Screw Torque Values
  • 1.13.7. Face Seal Fittings Assembly and InstallationAll Pressure Applic
  • 1.13.8. Metric Face Seal and ORing Stud End Fitting Torque ChartStanda
  • 1.13.9. Metric Face Seal and ORing Stud End Fitting Torque ChartHigh P
  • 1.13.10. SAE Face Seal and ORing Stud End Fitting Torque ChartStandard
  • 1.13.11. SAE Face Seal and ORing Stud End Fitting Torque ChartHigh Pres
  • 1.13.12. Four Bolt Flange Fittings Assembly and InstallationAll Pressure
  • 1.13.13. SAE Four Bolt Flange Cap Screw Torque ValuesStandard Pressure A
  • 1.13.14. SAE Four Bolt Flange Cap Screw Torque ValuesHigh Pressure Appli
  • 1.13.15. External Hexagon Port Plug Torque Chart
  • 1.13.16. Speed Limit Decal
  • 1.13.17. CE Plate Location
  • 1.13.18. Identification Numbers
  • 1.13.19. Interpreting the Serial Number of Your Machine 17 digits PIN
  • 1.13.20. Year of Production Table (Digit 5)
  • 1.13.21. Keep Proof of Ownership
  • 1.13.22. Keep Machines Secure
  • 1.14. John Deere Service Keeps You On The Job
  • 1.14.1. John Deere Parts
  • 1.14.2. The Right Tools
  • 1.14.3. WellTrained Technicians
  • 1.14.4. Prompt Service
  • 2. Page Number
  • 2.1. Section 05
  • 2.2. Section 10
  • 2.3. Section 15
  • 2.4. Section 20
  • 2.5. Section 25
  • 2.6. Section 30
  • 2.7. Section 35
  • 2.8. Section 40
  • 2.9. Section 45
  • 2.10. Section 50
  • 2.11. Section 55
  • 2.12. Section 60
  • 2.13. Section 65
  • 2.14. Section 70

Related products

-50%
Mahindra Tractor 16 Series 3016 3616 Auxiliary-Valve Instruction Fast Download

Mahindra

Mahindra Tractor 16 Series 3016 3616 Auxiliary-Valve Instruction

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 10 Series 4010 HST Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 4010 HST Parts Manual

$20
Add to cart
Mahindra Tractor 10 Series 5010 Gear Open Station Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 5010 Gear Open Station Parts Manual

$20
Add to cart
Mahindra Tractor 16 Series 2816 Gear HST Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 2816 Gear HST Parts Manual

$20
Add to cart
-50%
Mahindra Tractor 15 Series 2015 4WD Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 15 Series 2015 4WD Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 2816 HST Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 2816 HST Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 2216 Gear Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 2216 Gear Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 16 Series 1816 HST Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 1816 HST Parts Manual

$20
Add to cart