Manitou 220 TJ-X 2RD ST3A S1, 220 TJ-XP 4RD ST3A S1 Australia Operator Manual 647768EN
$20
- Type Of Manual: Operator Manual
- Manual ID: 647768EN
- Format: PDF
- Size: 10.5MB
- Number of Pages: 186
Description
-
Model List:
- 220 TJ-X 2RD ST3A S1
- 220 TJ-XP 4RD ST3A S1 Australia
- 1. OPERATING AND SAFETY INSTRUCTIONS
- 1.1. INSTRUCTIONS TO THE COMPANY MANAGER
- 1.1.1. THE SITE
- 1.1.2. THE OPERATOR
- 1.1.3. PLATFORM
- 1.1.3.1. A SUITABILITY OF THE PLATFORM FOR THE TASK
- 1.1.3.2. B ADAPTING THE PLATFORM TO USUAL ENVIRONMENTAL CONDITIONS
- 1.1.3.3. C MODIFYING THE PLATFORM
- 1.1.4. INSTRUCTIONS
- 1.1.5. MAINTENANCE
- 1.2. INSTRUCTIONS FOR THE OPERATOR
- 1.2.1. INTRODUCTION
- 1.2.2. GENERAL INSTRUCTIONS
- 1.2.2.1. A INSTRUCTION MANUAL
- 1.2.2.2. B AUTHORISATION FOR USE IN FRANCE
- 1.2.2.3. C MAINTENANCE
- 1.2.2.4. D MODIFYING THE PLATFORM
- 1.2.2.5. E DIESEL PLATFORM AXLES
- 1.2.2.6. F SAFETY DEVICES
- 1.2.3. OPERATING INSTRUCTIONS
- 1.2.3.1. A BEFORE STARTINGUP THE PLATFORM
- 1.2.3.2. B DRIVERS OPERATING INSTRUCTIONS
- 1.2.3.3. C ENVIRONMENT
- 1.2.3.4. D VISIBILITY
- 1.2.3.5. E STARTINGUP THE ENGINEPOWERED PLATFORM
- 1.2.3.6. F STARTING UP THE ELECTRICPOWERED PLATFORM
- 1.2.3.7. G OPERATING THE PLATFORM
- 1.2.3.8. H STOPPING THE PLATFORM
- 1.2.4. INSTRUCTIONS FOR WELDING AND BLOW TORCH WORK ON AN EXTERNAL STRUCTURE
- 1.2.4.1. A WITH AN ELECTRICAL WELDING SET
- 1.2.4.2. B WITH A BLOW TORCH
- 1.3. PLATFORM MAINTENANCE INSTRUCTIONS
- 1.3.1. GENERAL INSTRUCTIONS
- 1.3.2. MAINTENANCE
- 1.3.3. LUBRICANT AND FUEL LEVELS
- 1.3.4. BATTERY ELECTROLYTE LEVEL (ELECTRIC PLATFORM)
- 1.3.5. HYDRAULICS
- 1.3.6. ELECTRICITY
- 1.3.7. TILT SENSOR
- 1.3.8. WELDING ON THE ACCESS PLATFORM
- 1.3.9. WASHING THE PLATFORM
- 1.4. IF THE PLATFORM IS NOT TO BE USED FOR A LONG TIME
- 1.4.1. INTRODUCTION
- 1.4.2. PREPARING THE PLATFORM
- 1.4.3. PROTECTING THE ENGINE (DIESEL PLATFORM)
- 1.4.4. BATTERY CHARGING (ELECTRIC PLATFORM)
- 1.4.5. PROTECTING THE PLATFORM
- 1.4.6. BRINGING THE PLATFORM BACK INTO SERVICE
- 1.5. DISPOSING OF THE PLATFORM
- 1.5.1. RECYCLING OF MATERIALS
- 1.5.1.1. METALS
- 1.5.1.2. PLASTICS
- 1.5.1.3. RUBBER
- 1.5.1.4. GLASS
- 1.5.2. ENVIRONMENTAL PROTECTION
- 1.5.2.1. WORN OR DAMAGED PARTS
- 1.5.2.2. USED OIL
- 1.5.2.3. USED BATTERIES
- 2. DESCRIPTION
- 2.1. STICKERS
- 2.2. IDENTIFICATION OF THE PLATFORM
- 2.3. SPECIFICATIONS
- 2.4. DIMENSIONS AND DIAGRAM 220 TJX 2RD ST3A S1
- 2.5. DIMENSIONS AND DIAGRAM 220 TJXP 4RD ST3A S1
- 2.6. SAFETY COMPONENTS
- 2.7. CONTROL PANEL AND SAFETY DEVICES AT GROUND LEVEL
- 2.8. CONTROL PANEL AND SAFETY DEVICES IN THE BASKET
- 2.9. REMOTE CONTROL UNIT
- 2.10. SCREEN DISPLAY DESCRIPTION OF PAGES
- 2.11. DEFINITION OF SUBMENUS
- 2.12. OPERATING THE PLATFORM
- 2.13. TRANSPORTING THE PLATFORM
- 2.14. RESCUE PROCEDURE
- 2.15. OPTIONS
- 3. MAINTENANCE
- 3.1. INTRODUCTION
- 3.2. ORIGINAL MANITOU SPARE PARTS AND EQUIPMENT
- 3.3. DAILY AND MONTHLY MAINTENANCE
- 3.4. MANDATORY SERVICING AND PERIODIC MAINTENANCE
- 3.5. OCCASIONAL MAINTENANCE AND OCCASIONAL OPERATIONS
- 3.6. FILTER CARTRIDGES AND BELTS
- 3.7. LUBRICANTS AND FUEL
- 3.8. Ü 10H DAILY MAINTENANCE OR EVERY 10 HOURS OF SERVICE
- 3.9. Ü 50H MONTHLY MAINTENANCE OR EVERY 50HOURS OF SERVICE
- 3.10. Ü 250H PERIODIC MAINTENANCE EVERY 250 HOURS OF SERVICE OR 6 MONTHS
- 3.11. Ü 500H PERIODIC MAINTENANCE EVERY 500 HOURS OF SERVICE OR 1 YEAR
- 3.12. Ü 1000H PERIODIC MAINTENANCE EVERY 1,000 HOURS OF SERVICE OR 2 YEARS
- 3.13. Ü 2000H PERIODIC MAINTENANCE EVERY 2,000 HOURS OF SERVICE OR 4 YEARS
- 3.14. Ü 6000H PERIODIC MAINTENANCE EVERY 6,000 HOURS OF SERVICE OR 12 YEARS
- 3.15. Ü OCCASIONAL MAINTENANCE
- 3.16. Ü OCCASIONAL OPERATIONS
- 4. ATTACHMENTS
- 4.1. PIPE SUPPORT Part No. 52571261OPT
- 4.2. PANEL SUPPORT Part No. 52571261OPT
Related products
Manitou Operator Manual PDF
Manitou 1050RT, 1050RT (EU), 1050RT X-Series Compact Track Loader Operator Manual 50950436 Rev. H
$20
Manitou Operator Manual PDF
$20
Manitou Operator Manual PDF
Manitou 1050R, 1050R (EU), 1050R X-Series Skid-Steer Loader Operator Manual 50950262
$20
