John Deere 600D Series Draper Platform Operator Manual OMHXE16778-1
John Deere 600D Series Draper Platform Operator Manual OMHXE16778-2
John Deere 600D Series Draper Platform Operator Manual OMHXE16778-3
John Deere 600D Series Draper Platform Operator Manual OMHXE16778-1
John Deere 600D Series Draper Platform Operator Manual OMHXE16778-2
John Deere 600D Series Draper Platform Operator Manual OMHXE16778-3

John Deere 600D Series Draper Platform Operator Manual OMHXE16778

$30

  • Type Of Manual: Operator Manual
  • Manual ID: OMHXE16778
  • Format: PDF
  • Size: 12.9MB
  • Number of Pages: 136
Category: Tag:
Description
  • Model List:

    • 600D Series Draper Platform
  • 1. Contents
  • 1.1. Safety Features
  • 1.1.1. Platform Safety Features
  • 1.1.2. Recognize Safety Information
  • 1.1.3. Understand Signal Words
  • 1.1.4. Use Safety Lights and Devices
  • 1.1.5. Follow Safety Instructions
  • 1.1.6. Spanish Safety Signs and Operators Manual
  • 1.1.7. Wear Protective Clothing
  • 1.1.8. Prepare for Emergencies
  • 1.1.9. Store Attachments Safely
  • 1.1.10. Road Transport Disconnect Switch
  • 1.1.11. Guards and Shields
  • 1.1.12. Stay Clear of Harvesting Units
  • 1.1.13. Keep Hands Away From Knives
  • 1.1.14. Stay Clear of Rotating Drivelines
  • 1.1.15. Ballasting for Safe Ground Contact
  • 1.1.16. Practice Safe Maintenance
  • 1.1.17. Service Machines Safely
  • 1.1.18. Support Machine Properly
  • 1.1.19. Park Machine Safely
  • 1.1.20. Avoid Contact With Moving Parts
  • 1.1.21. Avoid Contact With Cutterbar
  • 1.1.22. Service Belts Safely
  • 1.1.23. Transport Safely
  • 1.1.24. Observe Maximum Transport Speed
  • 1.1.25. Service Tires Safely
  • 1.1.26. Avoid HighPressure Fluids
  • 1.1.27. Remove Paint Before Welding or Heating
  • 1.1.28. Protect Against High Pressure Spray
  • 1.1.29. Avoid Heating Near Pressurized Fluid Lines
  • 1.1.30. Dispose of Waste Properly
  • 1.1.31. Replace Safety Signs
  • 1.2. Safety Sign Location
  • 1.2.1. Safety Sign Location
  • 1.3. Transporting
  • 1.3.1. Transporting
  • 1.3.2. Preparing Platform for Transport (If Equipped with Slow Speed In
  • 1.3.3. Preparing Platform for Field Operation (If Equipped with Slow Sp
  • 1.4. Attaching and Detaching
  • 1.4.1. Attaching Platform to Combine
  • 1.4.2. Detaching Platform from Combine
  • 1.4.3. Feeder House Manual Unlatching
  • 1.4.4. Replacement Shear Screw Location
  • 1.5. Calibration and Programming
  • 1.5.1. When to Calibrate
  • 1.5.2. Calibration with Slope Float Kit Installed
  • 1.5.3. Calibration Error Codes
  • 1.5.4. Active Header Control Display
  • 1.5.5. Automatic Header Height Control System
  • 1.6. Operating the Platform
  • 1.6.1. General Information
  • 1.6.2. Armrest Functions
  • 1.6.3. Draper Belt Speed
  • 1.6.4. Draper Belt Speed Adjust Switch (If Equipped)
  • 1.6.5. Setting Backshaft Speed
  • 1.6.6. Cutterbar Tilt Adjust Switch (If Equipped)
  • 1.6.7. Reel Settings
  • 1.6.8. Feed Drum Settings
  • 1.6.9. Active Header Height Control
  • 1.6.10. Recommended Combine Settings
  • 1.6.11. Recommended Initial Crop Settings
  • 1.6.12. Harvesting in Dry Crop Conditions
  • 1.6.13. Harvesting in Tough Feeding Crop Conditions
  • 1.6.14. Harvesting in Short, Thin Crops
  • 1.6.15. Harvesting in Down Crops
  • 1.6.16. Bushy or High Volume Crops
  • 1.6.17. Sorghum
  • 1.6.18. Seed Loss Chart
  • 1.7. Attachments and Options
  • 1.7.1. Feeding Auger
  • 1.7.2. Long Divider Points
  • 1.7.3. Plastic Skid Shoes
  • 1.7.4. Crop Lifters
  • 1.7.5. Crop Lifter Adjustments
  • 1.7.6. Reel End Fingers
  • 1.8. Adjustments Suspension and Leveling
  • 1.8.1. Leveling Draper Cutterbar to Ground
  • 1.8.2. Equalize the Float System
  • 1.8.3. Lock and Unlock the Float System
  • 1.8.4. Lock and Unlock Gauge Wheels (If Equipped)
  • 1.9. Adjustments Feeding Related
  • 1.9.1. Platform AdjustmentFeeding
  • 1.9.2. Cutterbar Tilt
  • 1.9.3. Feed Drum Finger Timing
  • 1.9.4. Side Draper Belt Tension
  • 1.9.5. Center Draper Belt Tension
  • 1.9.6. Knife HoldDown Clearance
  • 1.10. Adjustments Windrow Conversion
  • 1.10.1. Removing Attachment Frame and Center Feed Assembly
  • 1.10.2. Removing Center Feed Assembly from Attachment Frame
  • 1.10.3. Installing Center Feed Assembly to Attachment Frame
  • 1.10.4. Installing Attachment Frame
  • 1.10.5. Installing Attachment Frame with Center Feed Assembly
  • 1.10.6. Setting Windrow Opening
  • 1.11. Adjustments Reel
  • 1.11.1. Set Reel Safety Stops
  • 1.11.2. Minimum Reel Height and Leveling Reel
  • 1.11.3. Fore/Aft Cylinder Mount Adjustment
  • 1.11.4. Rephasing Reel Fore/Aft Cylinders
  • 1.11.5. Rephasing Reel Lift Cylinders
  • 1.11.6. Bleeding Reel Lift Cylinder System
  • 1.11.7. Pickup Finger Settings
  • 1.11.8. DialASpeedDialASpeed is a trademark of Deere Company
  • 1.11.9. DialASpeed for 70 Series Combines
  • 1.11.10. Reel Speed Ratio Sensor Adjustment
  • 1.11.11. Reel Drive Gear Adjustment
  • 1.12. Lubrication
  • 1.12.1. Lubricant Storage
  • 1.12.2. Alternative and Synthetic Lubricants
  • 1.12.3. Mixing of Lubricants
  • 1.13. Lubrication and Maintenance
  • 1.13.1. Lubrication Interval Chart
  • 1.13.2. Care and Maintenance of Belts
  • 1.13.3. Every 50 Hours of Operation
  • 1.13.4. Every 200 400 Hours of Operation
  • 1.14. Troubleshooting
  • 1.14.1. Cutting Platform
  • 1.14.2. Active Header Height Control
  • 1.15. Service
  • 1.15.1. Tire Pressure and Wheel Bolt Torque
  • 1.15.2. Feeder House Safety Stop
  • 1.15.3. Reel Safety Stops
  • 1.15.4. Open Side Shields
  • 1.15.5. Remove and Install Side Shields
  • 1.15.6. Remove and Install Backshaft Drive Belts
  • 1.15.7. Remove and Install Telescoping Knife Drive Shaft
  • 1.15.8. Cutterbar Maintenance
  • 1.15.9. Knife Section Service Kit
  • 1.15.10. Remove and Install Cutterbar Knife
  • 1.15.11. Remove and Install Knife Sections
  • 1.15.12. Align Knife Head and Knife Drive
  • 1.15.13. Spare Knife Storage
  • 1.15.14. Remove and Install Knife Guards
  • 1.15.15. Center Draper Cleanout
  • 1.15.16. Cleaning Material Build Up at Side Shields
  • 1.15.17. Remove and Install Side Draper Belts
  • 1.15.18. Remove and Install Center Draper Belt
  • 1.15.19. Remove and Install Feed Drum Finger Guides
  • 1.15.20. Remove and Install Feed Drum Fingers
  • 1.15.21. Header Warning Light Bulb Replacement
  • 1.15.22. Remove and Install Sump Cover
  • 1.16. Storage
  • 1.16.1. End of Season Service
  • 1.16.2. Beginning of Season Service
  • 1.17. Specifications
  • 1.17.1. Overall Dimensions
  • 1.17.2. Gauge Wheel Tire Pressure and Wheel Bolt Torque
  • 1.17.3. Specifications
  • 1.17.4. Platform Weights
  • 1.17.5. Header Identification Number
  • 1.17.6. Keep Machines Secure
  • 1.17.7. Keep Proof of Ownership
  • 1.17.8. Unified Inch Bolt and Screw Torque Values
  • 1.17.9. Metric Bolt and Screw Torque Values
  • 1.18. John Deere Service Literature Available
  • 1.18.1. Technical Information
  • 1.19. John Deere Service Keeps You On The Job
  • 1.19.1. John Deere Is At Your Service
  • 2. Page Number
  • 2.1. Section 05
  • 2.2. Section 10
  • 2.3. Section 15
  • 2.4. Section 20
  • 2.5. Section 25
  • 2.6. Section 30
  • 2.7. Section 35
  • 2.8. Section 40
  • 2.9. Section 45
  • 2.10. Section 50
  • 2.11. Section 55
  • 2.12. Section 60
  • 2.13. Section 65
  • 2.14. Section 70
  • 2.15. Section 75
  • 2.16. Section 80
  • 2.17. Section 85
  • 2.18. Section 90

Related products

-50%
Mahindra Tractor 30 Series 4WD 4530 Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 30 Series 4WD 4530 Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 10 Series 6010 HST Cab Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 6010 HST Cab Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 2216 Gear Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 2216 Gear Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 16 Series 3316 Gear HST Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 3316 Gear HST Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 16 Series 3616 Gear HST Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 3616 Gear HST Parts Manual

$20
Add to cart
-50%
Mahindra Tractor 10 Cab Series 4510C Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 10 Cab Series 4510C Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
-50%
Mahindra Tractor 10 Series 3510 4110 Full Operator Manual Fast Download

Mahindra

Mahindra Tractor 10 Series 3510 4110 Operator Manual

Original price was: $20.Current price is: $10.
Add to cart
Mahindra Tractor 16 Series 1816 HST Full Parts Manual Fast Download

Mahindra

Mahindra Tractor 16 Series 1816 HST Parts Manual

$20
Add to cart