-
Model List:
- XUV825M S4 California Edition Gator Utility Vehicles
- 1. Introduction
- 1.1. Thank You for Purchasing a John Deere Product
- 1.2. Using Your Operators Manual
- 1.3. Special Messages
- 1.4. Attachments for Your Machine
- 1.5. Service Literature
- 2. Contents
- 3. Product Identification
- 3.1. Record Identification Numbers
- 4. Safety Labels with Text
- 4.1. Safety Label Location
- 4.2. Understanding the Machine Safety Labels
- 4.3. WARNINGCAUTION
- 4.4. WARNING
- 4.5. CAUTION
- 4.6. WARNING
- 4.7. WARNING
- 4.8. CAUTIONWARNING
- 4.9. Protective Structure Safety and Certification Label
- 4.10. WARNING
- 5. Safety Labels without Text
- 5.1. Safety Label Location
- 5.2. Understanding the Machine Safety Labels without Text
- 5.3. Avoid Injury or Death from Falling Off
- 5.4. Avoid Injury or Death from Rollover or Falling Off
- 5.5. Hot Surfaces
- 5.6. Avoid Injury From Equipment Fires
- 5.7. Avoid Injury or Death from Rollover or Falling Off
- 5.8. Avoid Injury or Death from Rollover or Falling Off
- 5.9. Read Operators Manual, Service Battery
- 5.10. Avoid Injury From Battery Gases and Acid
- 5.11. Avoid Injury from Fire, Falling Off, or Improper Loading
- 5.12. Protective Structure Safety and Certification Label
- 5.13. Supervisor Safety Responsibilities
- 5.14. Operator Training Required
- 5.15. Operating Safely
- 5.16. Using a Spark Arrestor
- 5.17. Parking Safely
- 5.18. Protect Children/Small Adults and Prevent Accidents
- 5.19. Avoid Excessive Speeds
- 5.20. Avoid Tipping
- 5.21. Use Seat Belts, Nets, and Doors Properly
- 5.22. Keep Protective Structure Installed Properly
- 5.23. Keep Riders Off Vehicle
- 5.24. Operator Ability
- 5.25. Before Driving
- 5.26. Transport Loads Safely
- 5.27. Using Front Attachments
- 5.28. Towing Loads Safely With Utility Vehicle
- 5.29. Driving On Rough Terrain
- 5.30. Climbing or Descending a Hill or Slope
- 5.31. Driving Across Slopes
- 5.32. Riding Through Water
- 5.33. Checking Wheel Hardware
- 5.34. Wear Appropriate Clothing
- 5.35. Practice Safe Maintenance
- 5.36. Prevent Fires
- 5.37. Do Not Modify Machine
- 5.38. Tire Safety
- 5.39. Handling Fuel Safely
- 5.40. Handling Waste Product and Chemicals
- 5.41. Use Electronic Display Properly
- 6. Machine Cleanout
- 6.1. General Cleaning Guidelines
- 6.2. Cleanout Areas
- 7. Operating Controls
- 7.1. Operator Station Controls
- 8. Operating
- 8.1. Daily Operating Checklist
- 8.2. Avoid Damage to Plastic and Painted Surfaces
- 8.3. Using Nets
- 8.4. Using Doors
- 8.5. Using Hand Holds
- 8.6. Adjusting Bucket Seats
- 8.7. Using Seat Belt
- 8.8. Using Ignition Key Switch
- 8.9. Starting the Engine
- 8.10. Stopping Engine
- 8.11. Using Instrument Display
- 8.12. Using Instrument Display Buttons
- 8.13. Exit Lighting Operation
- 8.14. Testing Safety Systems
- 8.15. Testing the Safety Start System
- 8.16. Testing the Park Interlock System
- 8.17. Using Park Brake (If Equipped)
- 8.18. Using Travel Controls
- 8.19. Emergency Stopping
- 8.20. Using Rear Differential Lock
- 8.21. Using Four Wheel Drive
- 8.22. Using Headlights
- 8.23. Using Turn Signals (If Equipped)
- 8.24. Using Hazard Lights (If Equipped)
- 8.25. Using Horn (If Equipped)
- 8.26. Opening and Closing Hood
- 8.27. Using Storage Areas
- 8.28. Using Accessory Outlet
- 8.29. Using Electric Power Assist Steering (EPAS)
- 8.30. Using Correct Tires and Inflation
- 8.31. Determining Vehicle Load Capacity
- 8.32. Using Cargo Rack
- 8.33. Using the Cargo Box
- 8.34. Loading the Cargo Box
- 8.35. Emptying Cargo Box
- 8.36. Using a Trailer
- 8.37. Towing Loads
- 8.38. Tire Chains
- 8.39. Using Park Lock Override
- 8.40. Using Front Receiver Hitch
- 8.41. Transporting Machine
- 9. Service Intervals
- 9.1. Servicing Your Machine
- 9.2. Break In
- 9.3. Every 50 Hours or Annually (whichever comes first)
- 9.4. Every 100 Hours or Annually (whichever comes first)
- 9.5. Every 200 Hours or Annually (whichever comes first)
- 9.6. Every 400 Hours or 24 Months (whichever comes first)
- 9.7. Every 800 Hours or 24 Months (whichever comes first)
- 9.8. Every 1000 Hours or 24 Months (whichever comes first)
- 10. Service Lubrication
- 10.1. Lubricating Drive Line
- 10.2. Lubricating Cargo Box Strikers
- 11. Service Engine
- 11.1. Emissions Service Information
- 11.2. Avoid Fumes
- 11.3. Gasoline Engine Oil
- 11.4. Checking Engine Oil Level
- 11.5. Changing Engine Oil and Filter
- 11.6. Cleaning Dust Unloading Valve
- 11.7. Servicing Air Cleaner Element
- 11.8. Checking Air Intake, Hoses and Clamps
- 11.9. Checking Spark Plug
- 11.10. Cleaning Engine Compartment
- 11.11. Service Cooling System Safely
- 11.12. Cleaning Radiator Cooling Fins
- 11.13. Recommended Engine Coolant
- 11.14. Checking Coolant Level
- 11.15. Checking Radiator Hoses and Clamps
- 11.16. Servicing Cooling System
- 11.17. Servicing Timing Belt
- 11.18. Servicing the Alternator Belt
- 11.19. Checking Spark Arrestor
- 12. Service Transmission
- 12.1. Transmission and 4WD Front Differential Oil
- 12.2. Checking 4WD Front Differential Oil Level
- 12.3. Changing 4WD Front Differential Oil
- 12.4. Checking Transmission Oil Level
- 12.5. Changing Transmission Oil
- 12.6. Inspecting Driveline CV Boots
- 12.7. Checking Driven Clutch Rollers
- 12.8. Cleaning Primary Drive Clutch and Enclosure
- 12.9. Servicing Drive Belt
- 13. Service Steering Brakes
- 13.1. Brake Fluid
- 13.2. Prepare Vehicle
- 13.3. Checking Brake Fluid Level
- 13.4. Checking Brake Lines
- 13.5. Bleeding Brake System
- 13.6. Checking Brake Pads
- 13.7. Checking Park Brake Fluid (If Equipped)
- 13.8. Adjusting Park Brake (If Equipped)
- 14. Service Electrical
- 14.1. Electrical
- 14.2. Service the Battery Safely
- 14.3. Checking the Battery (Sealed Batteries)
- 14.4. Removing and Installing Battery
- 14.5. Cleaning Battery and Terminals
- 14.6. Using Booster Battery
- 14.7. Replacing Headlight Bulbs
- 14.8. Replacing Rear Light Bulbs (If Equipped)
- 14.9. Checking and Replacing Fuses
- 15. Service Miscellaneous
- 15.1. Using Proper Fuel and Stabilizer
- 15.2. Filling Fuel Tank
- 15.3. Lifting Machine
- 15.4. Removing and Installing Wheel Assembly
- 15.5. Checking and Adjusting ToeIn
- 15.6. Adjusting Suspension (Standard Shocks)
- 15.7. Removing and Installing Front Seats
- 15.8. Removing and Installing Rear Bench Seat
- 15.9. Removing and Installing Storage Tray
- 15.10. Removing and Installing Tailgate
- 15.11. Replacing Cargo Box Tailgate Bushings
- 15.12. Converting Cargo Box to Flatbed
- 15.13. Inspecting and Cleaning Seat Belts
- 15.14. Inspecting and Cleaning Nets or Doors
- 15.15. Cleaning BackUp Alarm (If Equipped)
- 15.16. Cleaning Vehicle Surfaces
- 15.17. Cleaning and Repairing Cargo Box
- 15.18. Cleaning Gloss Plastic Surfaces
- 15.19. Cleaning and Repairing Metal Surfaces
- 15.20. Checking and Adjusting Quick Clamps
- 16. Troubleshooting
- 16.1. Using Troubleshooting Chart
- 16.2. Electrical
- 16.3. Cargo Box
- 16.4. Steering
- 17. Storage
- 17.1. Storing Safety
- 17.2. Preparing Machine for Storage
- 17.3. Preparing Fuel and Engine For Storage
- 17.4. Removing Machine From Storage
- 18. Specifications
- 18.1. Drive Train and Travel Speeds
- 18.2. Electrical System
- 18.3. Fuel System
- 18.4. Steering and Brakes
- 18.5. Capacities
- 18.6. Dimensions
- 18.7. Weights
- 18.8. Recommended Lubricants
- 18.9. Sound Measurements
- 19. Warranty
- 19.1. Product Warranty
- 19.2. EMISSIONRELATED WARRANTY STATEMENT OFFROAD UTILITY VEHICLE OVER 25 MPH
- 19.3. Tire Warranty
- 19.4. Limited Battery Warranty For Factory Installed Batteries
- 20. John Deere Quality Statement
- 20.1. John Deere Quality
- 21. Service Record
- 21.1. Record Service Dates






