-
Model List:
- 60, 72 In. Side Discharge Decks For Front Mount Mowers
- 62 In. Rear Discharge
- 60, 72 In. GLC Side Discharge Decks For Front Mount Mowers
- 1. Introduction
- 1.1. Using Your Operators Manual
- 1.2. Machine Use
- 1.3. Special Messages
- 2. Contents
- 3. Product Identification
- 3.1. Record Identification Numbers
- 3.1.1. Inch 7Iron Side Discharge
- 3.1.2. Inch 7Iron Side Discharge
- 3.1.3. Inch Fastback Rear Discharge
- 3.1.4. Inch 7Iron GLC
- 3.1.5. Inch 7Iron GLC
- 4. Safety Labels
- 4.1. Safety Label Location (All Except 62 in. Rear Discharge)
- 4.2. Safety Label Location (62 in. Rear Discharge)
- 4.3. Pictorial Safety Signs
- 4.4. Avoid Injury and Read Operators Manual
- 4.4.1. Avoid Injury
- 4.4.2. Before Servicing
- 4.5. Avoid Injury From Rotating Blades
- 4.6. Avoid Injury From Rotating Blades and Thrown Objects
- 4.7. Avoid Injury From Thrown Objects
- 4.8. Avoid Injury From Rotating Shafts and Drivelines (GLC Decks Only)
- 4.9. Avoid Injury From Rotating Shafts and Drivelines
- 4.10. Safe Operation
- 5. Assembly
- 5.1. Install Enclosure System
- 5.2. Caster Wheels
- 5.3. Install PTO Shaft
- 5.4. Install Deflector (60 and 72 in. Side Discharge)
- 6. Installing
- 6.1. Install Proper Ballast (1435, 1445, 1545, 1565)
- 6.2. Install Proper Ballast (1550, 1570, 1575, 1580, 1585)
- 6.3. Adjust Front Wheel Track Width
- 6.4. Check Tire Pressure
- 6.5. Installing Mower Deck
- 7. Removing and Storing
- 7.1. Removing Mower Deck
- 7.2. Storing Safety
- 7.3. Storing Attachment
- 8. Operating
- 8.1. Using Service Latches
- 8.2. Adjusting Mower Deck Cutting Height
- 8.3. Checking Mower Deck Level
- 8.4. Adjusting Mower Deck Level
- 8.5. Engaging Mower
- 8.6. Adjusting Mower Deck Front AntiScalp Wheels
- 8.7. Adjusting Mower Deck Rear AntiScalp Wheels
- 9. Service Intervals
- 9.1. Servicing Your Machine
- 9.2. Initial BreakIn
- 9.3. Before Each Use
- 9.4. After Each Use
- 9.5. After First 10 Hours
- 9.6. Every 25 Hours
- 9.7. Every 50 Hours
- 9.8. Every 100 Hours
- 9.9. Every 250 Hours
- 9.10. Every 500 Hours
- 10. Service Lubrication
- 10.1. Lubricating Mower Blade Spindles
- 10.2. Lubricating AntiScalp Wheel (60 and 72 Inch)
- 10.3. Lubricating Caster Wheel Axles and Pivots
- 10.4. Lubricating PTO Driveshaft
- 11. Service Mower
- 11.1. Cleaning Mower Deck
- 11.2. Rotating Mower Deck
- 11.2.1. Rotating Mower Deck for Service
- 11.2.2. Rotating Mower Deck for Operation
- 11.3. Removing and Installing Belt Shields
- 11.4. Adjusting Drive Belt Tension
- 11.5. Removing and Installing Drive Belt and Gearbox (All Except GLC Decks)
- 11.5.1. Removing
- 11.5.2. Installing
- 11.6. Removing and Installing Drive Belt and Gearbox (GLC Decks)
- 11.6.1. Removing
- 11.6.2. Installing
- 11.7. Checking Gearbox Oil Level
- 11.8. Changing Gearbox Oil
- 11.9. Changing Gearbox Oil (GLC Decks)
- 11.10. Removing and Installing Blades
- 11.11. Sharpening Blades
- 11.12. Balancing Blades
- 12. Troubleshooting
- 12.1. Using Troubleshooting Chart
- 13. Specifications
- 13.1. in. Mower Deck (Side Discharge)
- 13.2. in. GLC Mower Deck (Side Discharge)
- 13.3. in. Mower Deck (Rear Discharge)
- 13.4. in. Mower Deck (Side Discharge)
- 13.5. in. GLC Mower Deck (Side Discharge)
- 13.6. Tire Dimensions
- 13.7. Tire Inflation Pressures
- 13.8. Capacities
- 13.9. Recommended Lubricants
- 13.10. Tightening Torques
- 14. Declaration of Conformity
- 14.1. EC Declaration of Conformity
- 15. Getting Quality Service
- 15.1. Service Literature
- 15.2. Order Service Parts Online
- 15.3. John Deere Quality Continues with Quality Service






