-
Model List:
- 1070G Final Tier 4 CTL Harvester
- 1170G Final Tier 4 CTL Harvester
- 1. Table of Contents
- 2. Foreword
- 2.1. Copyright
- 2.2. Foreword
- 2.3. Declaration of conformity
- 2.4. California Proposition 65 Warning
- 2.5. Nonroad emissions control warranty statement
- 2.6. John Deere Harvester
- 2.7. Technical data
- 2.8. Machine identification
- 2.9. Engine Identification
- 2.10. Follow Laws and Regulations
- 2.11. Operating
- 2.12. Maintenance
- 2.13. Safety Decal Locations
- 3. Warranty
- 3.1. Standard Warranty Clauses
- 3.2. Standard Warranty
- 3.3. Extended Coverage
- 3.4. First 250 hours maintenance
- 3.5. Periodic Maintenance
- 4. Machine systems and components
- 4.1. Main switch panel
- 4.2. Tank assembly
- 4.3. Rotating and leveling cabin
- 4.4. Final Tier 4 engines
- 4.5. Tracks, antislip chains and wheel ballasting
- 5. Controls
- 5.1. Driving controls
- 5.2. Left keypad in harvester
- 5.3. Right keypad in harvester
- 5.4. Extra keypad
- 5.5. Lights and wipers
- 5.6. Righthand side storage box
- 5.7. Central locking system
- 5.8. Air Conditioner
- 5.9. Preheater modem
- 5.10. Preheater system
- 6. Operating the machine
- 6.1. Driving
- 6.2. Boom and harvester head
- 6.3. At the End of the Work Day
- 7. General maintenance
- 7.1. Cabin windows cleaning and inspection
- 7.2. Refueling the Machine
- 7.3. Refilling the diesel exhaust fluid (DEF) tank
- 7.4. Fluids and lubricants
- 7.5. Welding instructions
- 7.6. Electrical components
- 7.7. Hydraulic pressure measurements
- 7.8. Engine and hydraulic oil sampling
- 7.9. Vacuum pump
- 7.10. Rear hood
- 7.11. Front hood and service hatches
- 7.12. Boom general servicing
- 7.13. Changing wheels
- 7.14. Antislip chain fitting
- 7.15. Tracks fitting 1/4
- 8. Periodic maintenance
- 8.1. Introduction
- 8.2. Optional equipment maintenance
- 8.3. Every 10 hours or daily
- 8.4. Every 50 hours or weekly
- 8.5. Every 250 hours
- 8.6. Every 500 hours
- 8.7. Every 1000 hours
- 8.8. Every 2000 hours
- 8.9. As required
- 9. Transporting, towing and storing
- 9.1. Transporting the Machine
- 9.2. Tiedown and lifting points
- 9.3. Towing the machine
- 9.4. Stowing a disabled boom
- 9.5. Preparing machine for storage
- 9.6. After Storage
- 10. Environment, recycling and postuse
- 11. Attachments
- 11.1. Declaration of Conformity template_en
- 11.2. _1170G_specs_en
- 11.3. a08020_F_GAS_DOC_en
- 11.4. a02326_Arm_Silikonilayout
- 11.5. Bucher_Saw_Motor_Warmup
- 11.6. a07824_LSpressures_G_Harv_en
- 11.7. UMP_1070G_1170G_EN
- 11.8. Nokian_Heavy_Tyres_Pressure_Handbook_John_Deere





